Here are the parts and options needed to build a Ten4 4WD RC10. Obviously a donor car is needed beyond what is listed here. For the Long wheelbase version, an un-cut noseplate is needed. Also note, you must use a 6565 rear transmission case (with...
Last post
The parts Brian sells are still listed on shape ways for purchase. For the short arm, I have a version of the front carriers on shape ways since officially we didn't support them. They are documented here....
I have released a front suspension kit for the RC28, SC28, MT28, RC28T, and other 1:28 scale cars and trucks. It's a direct bolt-on kit that replaces the lame living hinge front end on these cars with genuine suspension. The kit makes the cars...
Last post
Got mine installed today! Love it! It also makes it look like a real rc!
As you are all probably aware, new Stealth outdrives are no longer available for RC10's. It is not clear if and when AE will be offering them again. I've been working on printed steel outdrives , but a better option is...
Last post
Sorry, I'm out and don't have any definite plans to make more.
I know a few of us are planning custom builds with composite chassis and different wheelbase options than what Brian and Jeff originally designed the kit for. After ordering the wrong belt, I found this online calculator that should help guys out in...
Last post
Thsnk you so much for that, exactly what i was struggling to calculate for my rocky project.
Much appreciated
Hey guys, going through my inventory, I found one and a half sets of my shorty battery cups and straps. I ordered another cup so now I have two complete sets for sale. If you're not familiar with these, you can check the thread here...
Last post
Just lowered the price, I want to get rid of these.
$25 + shipping for one set (the slightly discolored set), $27 + shipping for the second. This is almost $10 off from the price at ShapeWays, plus shipping from me will be a few bucks vs. 9 from...
I will be offering custom nose tubes for the forthcoming Ten4 4WD RC10 conversion kit. The Ten4 kit is made to use the front noseplate in the long wheelbase position. That being the case, the factory RC10 nose tubes are too short. You can drill and...
Last post
I am trying to get my 4-10 legend kit installed and running. Was hoping to use the ten4 bulkheadhead and bearing set up vs cutting mine and sourcing the idler kit.
Any guidance or help on sourcing the ten4 hardware kit would be helpful. I have been...
Finally available! Now there is another option for mounting battery packs in the RC10, no drilling required!. These battery cups have the same look as the originals, but have an added boss on them that allows them to bolt in to the existing holes...
I'm putting the finishing touches on having the motor plates and rear towers for this conversion manufactured and would like to try and gauge the interest in buying the parts to do this conversion in a kit form. The thread detailing the parts is...
Last post
Cool to see this thread back to the top. I have run an indoor racing season with the B1M, with some success towards the end as I was sorting the car out - for those who want to check how it went, all details here:
I have two of these in stock. $22 each + shipping. They come supplied with diff balls as shown. These are a direct replacement for the plastic RC10 DIFF gears.
I now have available battery straps for my transverse shorty pack battery cups, printed in Nylon.
I'll make these available at Shapeways in the next day or two, but for now I have 3 available for immediate shipment. The price is $8 plus shipping....
Last post
The width is 1.86 , and the length is 3.80 .
I've run several brands of shorty packs in them and they have all fit nicely. 8)
Donor RC10 (stealth or 6 gear chassis are both okay)
Complete set of Stealth transmission gears and bearings
Original Stealth Slipper or V2 slipper
Extra idler gear and bearings
B1M transmission case
B1M motor plate spacers
B1M...
Last post
Putting the bulkhead and transmission in the chassis
I highly recommend you tap all holes that will be threaded. I can't guarantee the screws will self tap into the printed Nylon they way they do in molded parts. For the bulkhead, the 4 holes where...
The Extended Shafts are no longer available. I am going to see if RR will manufacture more. If they will not, I will see about offering stock idlers that are pinned to extended shafts. I will keep this thread updated as I find out more
After 9 months of R&D, countless hours of design, printing, testing, and too many prototype parts to count, the Ten4 4WD conversion kit components are finally available! For the full story on the development of the Ten4 see the thread here...
Last post
I'll look into it.
Sorry everyone it's a bit of a PITA right now with all the parts listed individually. I'll see what i can do...
Users browsing this forum: No registered users and 2 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
