I have a lxt and pro se that I am restoring I have many LRM trannies to use but, they have to have the retrofit trannies in them. ( My first lxt had one and I always loved the look of the little grey box sitting back there :D ). I do have a 2.19...
ive found alot of other brand vids but i cant find vintage losi vids (lxt and older) i raced an lxt back in the day and my budy had a jrxt id like to see any kind of vid with these trucks (or buggys that there based off) heres a cool vintage vids...
Hi all,
I just came across some vintage parts, and among them is a losi motor plate for the jrx-2 series. it is anodized purple.
Does anyone know anything about this? I've never seen one before. did they make any other parts in special colors?
I can...
Last post
Where's Rich when you need him? He might not even know..... I think the last time we asked him he said he was too new at the company to know.
Erik-In my defence,that 'Street Beater' was a JRX2 I bought and ran as is,with the brushless in it...Your car was built up with all the best parts I had.The defence rests! :lol:
I'm happy with it. I'm slowly going to upgrade it to new parts here...
anybody have a pic and measurements for the spacer between the rear hub bearing and the drive pin? mine are missing and i might make a few on my lathe, thanks.
Last post
$2 for 2
I made some out of aluminum tubing from the lhs. Not as pretty as the factory ones, but for the same $2 I got enough tubing to make a ton of these
I'd link to post a link to an article I wrote a while ago for a french-speaking site (sorry, that's my native language) which describes in details a full resto for the first Losi car I ever owned, the almighty LXT (which I think would still...
Last post
No, but Bngiles is going to repop some. Were are the Pic's????
i know a guy that recently got one, im thinking of trying to buy it off him but not sure what they are worth, its all new except the box has been opened, i hope what its worth posts arent frowned upon, i just really have know idea.
Last post
It will ruin the value. but I would build it to. the box art paint isnt that hard I have painted two they were eazy I did them with spray cans :lol:
I found a few of these aftermarket jrx2 shock cartridges and was wondering if anybody can tell me if there is suppose to be more to this or if they are good to go like this? I asked a local gujy who knows about Losi's and he thinks there is...
Last post
Thanks for the confirmation. That was a cool link. I really like that jrx2 build you did.
hello, ive been into rc for around 25 years or so, i just recently bought a few jrx2s and would like to restore them, im looking forward to gaing knowledge (and a few parts) from you guys. :mrgreen:
Last post
thanks guys, i look forward to restoring these, and what about the repop bodies and decals, any place to get these yet, i saw a few guys were working on them.
JRX2 tranny slipping on take off? hey guys, I am into RC10's and always wanted a JRX2, Now i have one awesome like new JRX2 i want to run and a new box art JRX2 and a new built Junior two box art. RC10 trannys are easy for me but new to the JRX....
Last post
Hi guys, thanks for your replys. I turned the adjusting screw alittle till it felt nice, now it runs great.
I was thinking i have this JRX2 to have a little fun with but i hate to use a new jack Johnson Motown missle to that that with. i may just...
Here is the All stock JrxT I have been working on I have a JrxTR that will be ready very soon just waiting on a few parts. but thanks to Bngiles for the new bling it looks great but they will be going on the JrxTr when its finished. still not very...
Last post
Finished putting my LX-T back together its retired now it has a new undertray and body. New Tires, and a fresh set of Lunsford turnbuckles. I am waiting for Brandons LX-T's bodys before I paint it not real happy with this one its a little small.
I finally got all my cars out and took a few photos...I am totally addicted and it shows.
And yes,my JRX2 does need a body! As does my XXX-S,for that matter. :roll:
Last post
Hopefully you'll have a nice JRX2 on your doorstep,any day,now! :D
I have a JRX2 like yours...All it's missing is a chassis! :P
I took the XXX-NT for a burn,today.Got it runnin' real snappy,it starts right up at the push of the rotostart button....
Hey guys, I'm a new member with a nice collection of RC cars that i would like to share with all of you.I have been in this hobby since the age of 9. My first 2 buggies were Tamiya Frog and Tamiya Hornet which I still have and are now shelf queens....
Last post
The forum's pic uploader works pretty good for displaying, as long as your file size isn't too big. I think 250K is the max?
so i bought this really cool rear shock tower, and then as soon as i put it on the car i realized where the heck does the wing go.......
anyone have any ideas??
so i have a xxt cr from 97 and the original rear arms are shorter than a pair of graphite arms i picked up, now the drive bone is barely long enough even with the spacer moved to the inside..... did losi change something??
also i noticed that the...
Last post
thank you JKRacing i was hoping that was the case, so if any one is interesed... i dont need these arms..... i have a pair nip graphite the ones in the pic
the used pair im gunna keep for a misc project
Hi everyone, I havn't raced RC since the early 90's. This losi was my last buggy before I stopped racing (all the local clubs seem to die at that time) I don't even think I got to race it.
It was bought for me by my brother (who got it secondhand in...
The flamed body I was trying to trade didnt get no bites so I did this with it.Losi XXT chassis was hacked up so I trimmed it clean and took my cutters to the body.I think it looks pretty sporty!
Dave
Last post
their a bunch of those chassis on ebay new? I am just not into cut chassis, the xxt bodys are still for sale also, their like 15 bucks
why did losi change the color of the biulkhead from black to white??
i did notice that the bulkheads are stronger now..
has any one tried to dye one black?
Last post
I dont care about the white, but it looks better black! like it should be thats for sure.
does the xx cr graphite use a x long, long or standard chassis? its stamped on the rear batery area where the four holes are
i know the part #A-9902 Graphite/Composite Standard Chassis, but the hobby shop says that number doesnt exsist??
they say...
Last post
I have a new XX with STD on it, and a new XXT with L marked on it.
What's the point of the thrust bearing on the hydra-drive setup?
The outer part of the hydra where the thrust bearing contacts is keyed to the shaft, so it cannot rotate with respect to the shaft/spring/fixing screw.
If anything, it would make more...
Last post
I'm with you, don't see the need for the thrust bearing either. Or a spacer for that matter, I just screw the nut on further.
About all I can see is its a handy place to store the bearing if you want to drop the Hydra quickly.
I finally got ahold of a mip transmission for the losi cars. The case is a bit more of a snot green than a nice yellow, but it will do for now.
I got it rebuilt and tried to install it. The instructions specifically say to use the stock screw in the...
Last post
A nice spacer made from carbon fibre would look the biz 8)
Real car manufacturers keep counts of vehicle builds, specs, etc. For example: a 1970 Mustang had X # of cars built with a certain engine option, Y # of cars built with a manual trans, Z # of cars built a certain color,and so on. Do RC manufacturers...
Last post
Thats a good question.As with anything else it has a impact on present value.
I managed to scoop this XXX-S for a whopping NZ$80! (US$40)
It's local,too,so the shipping was only US$5.It's in really nice shape,too-it only ever saw a racetrack,never a parking lot.
The guy sure loved his red alloy,huh?!
Any suggestions for a...
Last post
I just sold my 1970 Torino Convertible, my best friend has a 70 Cobra 429 Super cobra Jet Dragpack car its nice, we are going to start restoring it next summer.
I am building a new xx4 that I got and am having trouble with the belt system. I have the trivetrain assembled diff to diff and it is very difficult to turn the belt system.. does not seem right but I've checked everything and all seems correct. Any...
will these work on xxt's?
i know that the xxx uses the same arm.....
Last post
No,the XXX pivot block will not work on the XX series of cars and trucks.
Not sure about the XXX rear hub carriers.Maybe try some plastic ones first and if they fit,buy the alloy ones?
What you want is a Trinity XX alloy pivot block for that XXT...
Well I want to start a debate. I Love Losi's as everyone here knows, I have all of the Losi's made from the Jrx-2 -XX cr. But now that my Local Hobby shop has gone under :( the closest place to Race is 2 hours away, not intrested in that. So I have...
Last post
I might try crawling too....
I got this Mini-T that likes to go up walls now by my 4yr old.... :lol:
what does the xx buggy use for the front spindle/carrier, i know its not the same as the truck, i almost have enough parts to build a xx buggy but im short the spindle and carrier assembly.
can any one point me in the right direction..... or does...
I won a Lot on Ebay and their are some JrxT wheels I they are 3 pc. but have 4 bolts their yellow and in this picture? any info thanks ?
Last post
I can attest to that,Rick.
None of my race cars are fun to just bash with.
My X-6 is quite a dull car to just blast around the backyard,or up and down the road with.
Get it on the track and it's in its element :mrgreen:
Same deal with my JRX-S...A...
I got a quick question. I acquired a set of stock JRX-T orange 5 bolt rims for my brothers JRX-T from eBay. The tires are glued and I was wondering if these particular rims can withstand the acetone bath to get the tires to free up....
Last post
Thanks for the replies, I think I feel safer taking a knife and a Dremel to them for clean-up of stuck rubber than chancing the acetone. The tires definitely are not worth saving.
Well,thanks to Gary,I have a new,uncut XX CR Kinwald decal sheet and thanks to Berrickster,I'll soon have a new X-Cellerator body to put on my XX CR I've restored.
I just HAVE to paint it in Kinwald war paint.
Does anyone know what brand of paint...
Last post
Crikey,I didn't even realise that Brian's holding an X-5,not an X-6 :oops:
I checked in at the X Factory message board and no reply from the Dirtinator,as yet.
I'll keep ya'll posted.
Yeah,US$80 isn't bad,but when you live out of the US and the...
I'm not looking to buy one just wondering if they exist.
I started working on a jrx-pro tonight. I opened a nip front shock tower and the thing is a mess, all scratched and scuffed on both sides. I've gotten one like that in the past too. the rear...
Last post
They all look like that. It is not a function of being scratched up, I believe moreso a function of the materials they where manufactured from.
I just won this JrxT on E-Bay for just under 50 bucks :lol: Funny thing is I sold it to him early this spring for 150.00 :lol: got to Love Ebay!! It has New RPM Suspenion arms new Orange wheels It will be right at home back on my shelf :D I am so...
Last post
...I wasn't clear.
The Nova has been gone since 10/97. Ford Tech since 2003. First Ford is my Crown Vic. My Grandpa was a Chevy Dealer in the late 50's to early 60's.
You can google one of the RARE Z06 63' Vettes that he sold on ebay. Ernie Porter...
Users browsing this forum: No registered users and 6 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
