Looking to resurrect the TRX-1 I used to race when I was a teen. This car has some club race wins on it, as well as a 92' Mountain States Off Road Championship 1st place finish in 2WD Stock A-main. I was a kid back then, and bought one of the first...
Last post
Looks Great!!! Those Slash carriers come in clutch when nothing else works! I've been running the older Bandit style wheels... love the dish, and the fact that they still use the pin-style axles. Also love that you have some nice blue hardware in...
Apparently I have a Traxxas TRX .12 or .15. From a question I asked earlier it seems a Rustler is pretty close to this. Unless they are actally the same. What I want to do it to put on rear swing arms that don't toe the rear wheels as much as the...
Last post
I did as suggested and got the toe almost to 0 degrees. I really don't need it neutral but thats how it came out by switching the rear swing arms. I did order some degree blocks and the 1.5 hub carrier to get the toe closer to my SRT electric truck....
I'll soon have a parted-out Bandit in my possession, my first Traxxas. I can't say I've ever seen a Bandit rolling on anything other than the stock chrome five-spokes which I find to be kinda ugly. I know they use a pin-drive mount on all four...
I got this from a friend clearing out some stuff. I have no info on it tho except a TRX Nitro engine manual. So I guess its a traxxas TRX? Either a .12 or .15 engine in it. It was filthy but cleaned up ok. I put new bearings on all four corners (had...
I wanted to share my slipper conversion to dual pad slipper clutch.
Since the classic Traxxas slipper already is double sided I was searching for spur gears that would fit the center bushing. Well I was not successful doing that so I...
Last post
Looks great!!! May have to give something like this a try on my zombie TRX-1 :)
My son has a bandit and it is a pretty stout car. He has gotten used to it on 2S and I had a large 3S battery that I was not using (I crashed the airplane it came from) and I wanted to put it to use. I bought the 3725X battery expansion kit and it...
I picked up the STRC layshaft to run the associated slipper, and some of the parts that they list to use with the shaft are discontinued. What are the alternatives to use? The 5-40 locknut I can find, but the 9605 slipper spring I can't find. What...
I have been looking for some replacement pivot balls for an old Bullet I am trying to get to running condition. Originally these were available as Traxxas part number 1642 which included both the pivot balls and rod ends. This part number is no...
Last post
I believe the 1942 set has the four round shank ends for the shock rods as well. They fit the underside of the spring cup and are slightly shorter as well. The balls in the 1942 kit fit the older style white and gen2 black rod ends. As previously...
I was finally able to hit the track with my Bandit and I was severely under geared. Started with a 84/24 then went to an 84/27 and ended the day with an 84/31. And I still was not able to clear the jumps I should have been able to. Also, with the 31...
Last post
I got my Kimbrough spur gears in and was able to use one of their 69tooth options. The friction pegs fit in fine and the center hole where the hex bushing goes was just a few thousandths to big and there was just a little bit of movement. But I put...
So as the title says I bought an original tmaxx .15 complete with the box and all the paperwork. I found a clear body online and I’m gonna send it out to get painted(box art). From the pics it looks to have maybe 10 minutes runtime on it. I’m really...
So I've been working on my Bandit, and one thing that really bugged me was how sloppy it was. I was able to shim out most of the suspension slop, but one area that I just couldn't tighten up was the rear wheels. There was too much play between the...
Last post
I also have slop in the rear hubs of my Radicator Experts. I was planning to use flanged bearings on the inner side to tighten things up. Still have to order those though.
I have an old Traxxas TRX-10 Bullet that is in pretty sad shape. I would like to get it to drivable condition and need to replace many of the parts. One part which is very difficult to locate is the front bulkhead or arm mount. I believe this is...
Last post
Chewbacca - Thanks for the picture. This does make it clear that it would be as simple as cutting flush with the shock tower mounting surface. And, good to hear that the upper shock tower mounting points are the same. This may give me a relatively...
So I’ve seen a few versions of the mid motor Rustler and Slash on this forum and the Traxxas forum, and I decided to give it a try myself. Except I want to do a Bandit. I’m starting from nothing and going from there. I did pick up a partial roller...
Last post
Definitely watching with great interest. I've wanted to do a mid-motor build of my own design for years. With 3-d print and cnc-routers becoming more commonplace, i may have to jump into it. Cant wait to see how yours pans out.
I posted this on the Traxxas forum but probably should have done it here on RC10Talk.
Does the Bandit have any performance potential when compared to buggies like the old RC10 Championship Edition or Losi JR-X2? I'm not looking for something on par...
Last post
Since the chassis itself has no kickup, and the original Bandit / Rustler chassis is like a dime a dozen the mod can be quite simple, unless you want to be able to change the wheelbase back again.
So to shorten the chassis I would simply cut the...
Been a few years since I’ve logged onto the forum, but I’ve had a bit of a resto/rebuild bug bite whilst I’ve had a couple weeks leave, have already knocked over a Monster Beetle, and am more than halfway through a Turbo Optima with belt drive....
Last post
Wow! Incredible build. I need to check out the Traxxas section more often.
Yup, I was think'n the same thing...nice job!
Same here, I need to pay attention more. I have a Bullet in storage from one of my childhood friends that's just waiting...
Picked this up from a buddy a couple days ago. Cleaned it up a little to assess if it was something I wanted to restore or pass on to someone else. I have to say, this truck seems weird to me. It's a cool truck, but seems to have some oddities....
Last post
It's not in bad shape. The front of the chassis is a little rough, but fixable. A few of the original white parts have been replaced with black ones over time and the rear arms are mismatched. Both are white and the same dimensions, but the one on...
So I'm starting to do some research on doing a Scott Montgomery replica circa the 92 nats. I know he used a losi ball bearing steering crank but I'm unsure of the electronics. The most I could find is a Novak ESC, Peak motor, Airtronics radio, Orion...
the concept - build a modern track capable truck based on the LS2 chassis thats actually competitive, tall order i know :lol: .. anyway not much of the bling in the photo will be utilized .. weight and function is the goal on this build there will...
I've always had a soft spot for old Traxxas stuff like the Bullet. When the TRX-1 came out BITD, I was really intrigued. I'm not overly knowledgeable on Traxxas stuff, but how much of the TRX-1 DNA made it into the Bandit we know today? I have this...
Last post
that is kinda crazy. Around me the bandit gets treated like the red headed stepchild of the family.
Yeah, I know. It seems like Stampedes and Rustlers are more popular but the prices on these used Bandits around me are nuts. On my local trade...
Looking for suggestions for some aftermarket shocks for a rustler or bandit. There doesn't seem to be anything between the no-name Chinesium garbage and the grotesquely overpriced Traxxas parts.
Last post
Traxxas hard anodized shocks with titanium coated shafts are $30 or less a pair. If that is too expensive I would stick with the plastics. You won’t find a better quality shock imo for that price. The cheap threaded eBay/amazon shocks are garbage.
I cant recall when these came out late 80s early 90s? 1/6th scale, there was also an on road version, wish I had that.
Mine has not been ran much or bashed, i ran it once several tanks many years ago....
Last post
Timing is everything,
Trends come and go, i had purple hair in the mid 80s, now its grey
Lol,
I remember a time people wanted to replace batteries and motors with nitro engines, now a trend is to replace nitro with modern electrics, which too...
So after losing out on an old school Bandit to build up a mad idea I had, I bought a clapped out Blue Eagle on Ebay. At first glance, it's a basket case. I've been searching the site for a while for details about these and seems to be that I may...
Last post
Whoa!!! Nice work. I love those dished wheels. And the black and white parts look fine. I'm definitely not a purist when it comes to making and old TRX rig whole again. Dig the old school spikes too.
As you might know I have a big soft spot for Traxxas' first race buggy. As lockdown is getting looser now and the onroad track is reopening, and I'm back to team manager / main mechanic maintenance slave for my team (composed of myself,...
Last post
Thanks for the info - I am using a product which looks pretty darn similar to this:
this old truck has been passed between me, my brother, and son since new all 3 of us have 'tried' to race it at one point or another but i'd like to freshen it and hit a local track beginner class with it just for fun .. so the questions -- will a...
Last post
thats all i need is more stuff to tempt me to empty my wallet haha :lol: .. im already moving on my 'vision' of what i want to build .. alot has to do with the fact ive had the ls2 forever and a day and want to do something with 'that truck' .. so...
Hi,
I am looking for an alternative body for the Traxxas Nitro Buggy. The Original has an cage around it. Does anyone know a body which fits nicely around the outlines of this chassis? I looked at the bandit body, but I am not sure, has anybody...
Last post
15887083777055538998338643774053.jpg 1588708433509411535197057789527.jpg 15887085046436474230933326628042.jpg
Of course that's a trx1 body on same chassis for comparison. Body could go down in front but hits the tub sides already.
I won't rehash the story again and again about how surprised one can be at the shape some runners are sold as... So I basically started rebuilding a TRX-1 from fresh parts, as I need it to compete in the last round of the vintage class in...
Last post
Great to hear cars are still getting dirty !
damn straight!
Last time I posted a dirty car picture I got roasted for it :lol: .
glad you still have this one. Its been on my to do list to freshen up one of mine and just haven't had the time to...
Apparently Traxxas won a lawsuit against Hobboco/Aarma regarding the laydown shock design. From what I've read, all AARMA trucks with laydown shocks are on hold. It is hurting Tower Hobbies as well. Its a shame and doesnt make much sense. Schumacher...
Last post
Here ya go Traxxas, chew on this
Huanqi 727 Slash “clone”. Besides the electronics, color of parts and tires/wheels it’s identical. But....it was $132 shipped to my door
I just needed a rig for mock up. This fit the bill a lot better than $400....
I really liked the Bigfoot 1 body that Traxxas released, but I immediately thought of putting it on the Super Clod, with the Bigfoot scheme, but decided to save the Bigfoot decals for a future Blackfoot.....
So I bought the body for the Stampede...
Last post
It’s been a while since I posted anything on this, so here it goes.
I’ve widened the front end with the RPM wide arm kit.
Hobbywing Brushless system.
And added a set of Jconcepts Midwest wheels and some Proline Destroyer 2.2 tires.
In the midst of getting into this hobby and seeing what's out there, I picked up a near-mint Bandit. Had to replace the MSC servo, lube the steering servo, and get a NiMh battery, but after that it worked flawlessly. I let my kids bash it around at...
Last post
if you're having fun with it, that's all that really matters. :D
Wonder if anyone has experience of changing the rear wheels on a TRX-3 (or TRX-1) to hex fit please.
With a 5mm axle and pin fitment as standard at the back I guess a hex could be added to mount modern wheels - but any idea if the modern offset...
Last post
I used a set of LS2/SRT rear hexes on my TRX1 and AE/Losi style rear wheels, no issues. For the front, I was able to get a hold on some Team C (not sure what the UK brand name is) front carriers/knuckles for hex. Fit right into the arms like they...
I bought this radicator from ebay
now I do not know whether it is a graupner or a traxxas?
I know that the traxxas has white chassis and suspension
but the graupner normally has a narrow front bumper and is black
do you know?
Last post
Added full ball bearing cleaned up the whole car refilled the shocks added on 4600 kv brushless combo .
Drives crazy fast
I was looking at RC boats today on the Tower Hobby website, and noticed a Traxxas policy regarding coupon codes. There is a message in the lower left stating Coupon Discount Not Allowed by Manufacturer of this Product .
Really disappointing. Anyone...
Last post
Most all brick n mortar shops are struggling against the online places. And yes many folks lack a shop or one that has anything. We have two decent RC shops in Indianapolis. Yes they are Traxxas heavy, thanks to the Slash being the hot thing...
I am new to the RC world. I just bought a Rustler VXL and I want to go faster.
I have actually the stock batteries - Power cell 8.4v 3000mah and I need to know I upgrade my rustler vxl battery to 11.1V lipo, Can I use my 8.4V 3000mah...
Isn't that how it always begins...hey, a project car, kind of incomplete, let's get it and slowly pick up the parts to complete the car.
Darn, now I know what the car was missing parts, they are impossible to find....to the back burner, under the...
Last post
An SRT 'fell' into my possesion (different thread), and the stock steering parts 'fell' onto my TRX1, with custom extended SAE axles. I can run Re-re Worlds/B4 front bearing wheels with zero loss of width now & no rubbing.
anyone have defender? how about your feeling about that?
Last post
The TRX4 is a great truck but there are a bunch of others just as good and better. My SCX10ii is way more nimble. The TRX4 is way better than the RC4WD Gelande
This was a recent rock crawl with my sons where the esc the TRX4 died. I plan to...
Without having to read back through every post I was hoping those in the know could assist me on this long time project.
I have had a new built car for many years which I purchased from a fellow member here but also picked up a well used (and a...
Last post
I use 3% too. You can find 6% at the chemist I believe, and from memory it's the same price as the 3%, so I just dilute 50/50 to make 3% as it goes further. If you use too strong of a solution it goes chalky and powdery. Many use UV light but the...
Users browsing this forum: Ahrefs [Bot] and 12 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum