With the amount of these that are being purchased, there will be a flood of build threads coming. We don't want the new car to bury the o.g. new builds, replicas, restorations, etc., that already take place in our buggy forum. So the best thing to...
Work in progress.
Chassis from Jeff ´Factory Works`
Scorpion rear arms and wheels
Original 6 gear.
I´m not sure about the nosepiece but it was old and black to begin with :-)
Rest is RC10 Classic parts, with a little help from an Ultima RB6
Last post
Many Thanks for the kind words.
ummmm, Apple Pie... Now I´m lusting for cake :mrgreen:
And Yes, they´re Scorpion wheels.
Hey everyone, hope all is well...
I've got an RC10 project on the go and I'm using some rerelease RC10 Worlds parts and I want to dye them black with Rit dye.
Do the rerelease parts dye OK?
Thanks!
Last post
Hey, does anyone know if RC10B4 turnbuckles will fit an ol' RC10 Team Car?
I'm using Rpm rear arms and Andy's front arms.
Thanks!
they'll be a tad on the long side, much longer arms on the B4 than the old-skool rc10 (B1? :D)... but if you are ok...
Ran my RC10 Worlds car at the first race meeting yesterday. Car has a Lipo, so lighter that it was designed to be. Loosened the slipper as far as I dare, and adjusted gearing as much as possible but the front kept lifting up until I fitted some...
Last post
I use quality double side tape to mount my weights. I like to have the option of changing the location of the weight and I use the standard AE lead weights
I've had a stock notification for the #6310 gold nose plate for quite some time. Last night, I get an email saying This item has been discontinued . :(
Last post
I was afraid that it was another bankruptcy notice. :shock:
Has anyone been able to find a anodizing service that can match the original RC10's color?
I had plans to build up another B1.5 for next year's race. But A-main Hobbies was blowing out Worlds kits last week, and with the coupon codes on top of it, I could not pass up buying one. It'll be so much cheaper for me in the long run. So I got...
Last post
Ahh, I do that all the time... waste money on stuff that I thought would work and it doesn't or it's a part that I already have!
First of all it's been a VERY long time since I've been on this site.... WOW looks like Ive missed a lot!
So I picked this up new and built it to this point a couple years ago. Since then it's just kinda been hanging around the shop waiting for a...
Last post
Holy molly! What the heck happened? I haven't been on here in a while and I see this? I bought mine when AE first made the production run for Amain for like $130. How did this happen?
I've only run mine 1 time and has been shitting on the shelf for...
I have been doing this way too long and always ran Losi. For some reason, I got bored, sold that collection and have gone down the RC10 wormhole. I built this to run at the local carpet off road track that recently opened. I am running Schumacher...
Last post
Hi all,
Just thought I'd post in here and mention that Windy City moved to a new, much bigger facility. The off road track is huge and is now on-road carpet instead of the turf, so clay or foam tires work well. I brought my RC10T there this weekend...
I finally managed to get hold of a set of white front a-arms for my Worlds Re-Re.
However, the a-arms bind/rub with the worlds re-re shock rod end. The space for the bottom of the shocks is marginally larger on black a-arms (1mm bigger?)
What...
Last post
Where did you find white arms? I would love to get a set.
I was lucky enough toget a great deal on an RC10 Classic last night. I had a good chat with the owner and checked out his RC collection when I picked it up. After building the car in 2014 he had installed a Novak Edge esc and a Novak Ballistic...
What are the thoughts on the all inclusive kits being offered by I guess team Associated. I noticed they offer a kit for $760 to include ESC, battery , motor and servo. I am hearing there is a similar kit with a mod motor being offered for $499 but...
I’ve been wanting to build an RC10 trailing arm conversion runner for years as I’ve never actually driven one. I came close once with an A&L build, but when it was done, I just couldn’t bring myself to run an actual vintage chassis. When I saw that...
Last post
:D
I thought I'd post up these pics also, just in case someone finds them helpful. I tried all sorts of rear mounts for the Andy's Renegade body. The best solution I could come up with to deal with the angles on the rear of that body was a single...
Hi guys. Here is my Team Associated World's Car re-release. I completed the build last year (Sept. 2016). Some of you might remember seeing it. I haven't done anything to it since then, and it has only been driven a couple times. It was a really fun...
Last post
Savox can be loud, I almost always use the same model, some make noise and others not a peep. Go figure. I saw a review online that showed Turnigy 1258 is basically identical but around $40. I may try one.
Needed some new axle pins so ordered up some 7665 as shown in Rere manual. What showed up were 10GT pins and are too big by far. Am I missing something, I know I will order smaller ones (7369 perhaps) but is manual wrong?
20170909_130733.jpg
Last post
7369 was the answer. There is no way the GT pins were going to work.
A while ago I bought a worlds re-re and built it. I ran the gearbox on the drill for a bit to free it up.
However, it was still a bit notchy (but not as bad as others have experienced). Anyway, I finally fitted the old idler gear and case. What a...
Last post
Yeah... Of the two kits I've built so far... one spun but was rough... the other was total junk. So I pre-emptively ordered a handful of extra cases, idlers, topshafts... :-/
Hi guys. I ran my RC10 Worlds last Sunday at my local club, a bumpy astro track with a 7.5 and it went really well, beating all of the 4wd modern cars in my heat! Anyway, I am running saddle pack lipos in the car, and the battery strap is causing a...
Hi everyone. I have mostly built my Worlds car, although I have a bad gearbox layshaft. I also notice that the steering bellcranks are very stiff. Can I ease them, of if ballraces are best what size do I need? I couldn't find a search box so please...
Did AE always have them priced @ $399 on their website, or did they just try to milk the price at the very end? I ended up paying $350 shipped for a sealed one on the bay last month.
I see that Associated has the 6002 kit listed as out of stock. Also I noticed there are none listed for sale anywhere. There are only a couple on ebay and they are priced at or near full MSRP. Did I miss a post? Hard to believe they all disappeared...
Last post
There is at least one nib and one built on rctech.net. Of course they are on the bay as well. I'm still on the fence about buying one.
The overall plan is to incorporate a mix of classic, world's, aftermarket and vintage parts
Here's a look at the chassis
Parts
Team Associated RC10 World's Car Kit - 6002
JConcepts Aluminum RC10 Steering...
Last post
Do you find that the dhawk rear bulkhead stiffens up the rear end of the chassis? The nylon bulkhead allows some flex in the rear, so curious if the aluminum bulkhead solves that.
Since this is the first and only RC10 I've ever built, I am unable...
Been meaning to load some pics up, so here goes. This is my worlds re-release. IMG_1842.JPG
Took it to a grass race at the weekend as my spare car. After a broken part stopped my b5m in heat 2, I needed to run this, and it flew. The grass was worn...
Last post
I'm not a top racer no matter what car but I am currently running mine in a 17.5T class on carpet off road and I am right in the thick of it. Most people can't believe how well it does, me included. Mine is pretty much out of the box but tuning has...
Just starting a thread for my 2nd Worlds ReRe build that will be for racing. Going to start with making the parts list. Some of which I've already started acquiring.
Edited 2017/05/31
SSC10 Chassis Kit & Motor Guard
Dyed all white parts Black...
Last post
Rattle can job of my old school racing colors. kinda like the bright color contrast...
BodyTestFit.JPG
As mainly a Kyosho and Losi fan, I've not spent much quality time with RC10s of any generation. I have a few in my collection and restored a couple before the Classic re-release, but I've never actually driven one :oops:
I installed these rerelease worlds CVAs on my championship edition and they appear to be a little short. During the first run it popped out like this. Does it look like they are not set up correctly? Are people successfully using the worlds CVAs on...
Last post
Thans
ks also from here on the #9911 dog bones. I'll get some for the future.
Hi all. Nice place you have here. I have just completed my RC10 World's buggy. The only thing that seemed to be a problem was the transmission. It is notchy when you try to turn it by hand. I had read about the trans problems on this forum before I...
Last post
Long whip antenna....check! 8) I signed my autograph on the body to give it that finishing touch. :lol:
Just building a box stock, per the manual World's ReRe. Hope to put it up on the shelf next to my original Worlds. Although the latter has seen significant track time back in the day, still has the dirt in the crevices. lol.
Anyway with the ReRe...
Last post
This design still looks SOOOOOO good even after ca. 30yrs. that it's shocking 8) 8) 8)
Hi all, been slowly getting back into the hobby over the last several years. Used to be into RC boating back in 80's as a kid. Grew up on a lake and had a nitro Kyosho Jet Stream. My cousin had a hornet and his friends had a Frog. Another had a...
Last post
Thanks, I agree simpler paint jobs are less distracting. I don't like overly elaborate paint jobs on racers. I like having something that tells me orientation very well. I just watched the '87 IFMAR championship, that was one loose track. Our track...
Well, I'm finally one of the cool kids, :lol: A Re-re Worlds for my birthday! Really looking forward to building this. My last RC10 was an '84 Edinger that I purchased that year and I kept for four years. It's funny, when I was going through the...
Last post
I would not worry about the body as the turbo looks close enough. I mean, it is a rere in any case right? Your build looks great btw!
Thanks Rod! Most of the re-re stuff was taken off and replaced with more period correct items. The re-re...
hi guys . after building my new rere worlds kit and mounting the motor and pinon .. noticed that the spur gear had a really big wobble .
thought it might been a problem with slipper pads but after taking apart and putting back together the wobble...
Last post
Was rebuilding the trans in my B2 yesterday and remembered reading this thread. I too had a slight wobble in my spur gear (updated top with the B4). I never had an issue running it with the wobble, but it was bothering me. After checking everything...
I have a kit ready to start but since I am still fresh into the hobby (actually returned after 30 years) I'd like to have a thread where I can ask questions and get advice w/o starting fresh threads each time. In this case, I can have...
I guess I will start a build thread instead of just lurking.
I had a RC10 CE as a kid, and recent blew the dust off. A co-worker is a collector, and told me that the gold pan was too clean to bash, so I ended up buying a WC re-re, which was cheaper...
Last post
Fixed the shock, added some weight in the nose, and made a couple ESC changes. A test drive in the street revealed that this thing is ridiculous. Rolling into it at 15-20mph rust resulted in pulling wheelies...
I traded a fellow member my unbuilt classic kit for this. Not totally sure on a direction, up in the air if I want to leave the chassis parts black or send them out to ano a different color.
I was going to throw the trans together to see what all...
Last post
I know you're trying to replicate a specific paint scheme, but I like your design -- sans the black fade -- MUCH better. It just looks so clean. Love it! I wouldn't change a thing.
When I got back into rc last fall , I pulled out my rc10 fom the 80's which I never really got to enjoy as a kid and for whatever reason, I got drawn to rc10s.
....
When I first found this site, it was like a wealth of info ......but the one...
Last post
Efxaristo^^
.....Yeah.....these things can definitely bring the kid out of you...
My rc-ing got temporarily put on ice due to a couple of factors.....My two friednds that i was bashing around with temporarily got out of the rc thing....The local...
Amazing how things tend to snowball. I started to build a Kinwald Worlds replica from a re-release kit, gathered a few vintage parts, cut the chassis, then it was pointed out that the original didn't have a machined tub. Now I had to source one of...
Last post
Hey guys, sorry for the late reply. I think I cut about a 1/4 off the sides. Weight loss, negligible. It looks cool, and the body doesn't rub on the edges as much.
I ended up drilling and tapping some 4-40 nuts. I'll post up some pics when I get...
Going to build my 1993 stealth chassis up to race in 17.5 spec racing this winter. Here is what I have to start, plus a few parts that are going to be donated from my way to expensive B4.1 build. So here is my overall plan going off a buggy I seen...
Last post
Nice, I have read most of the thread on and off since you started it. I may have missed it, but is there a track you go to with it? Yes 510 Raceway in Foley MN - Indoor dry clay
Are there any options for the front battery cup? The stock one works but it's an extremely tight fit. It's also a bit tall and interfering with my hardcase LiPo. I may just get a stock replacement and cut it down but was wondering if there were...
Last post
Thanks.
With the modern hard case LiPos it definitely is not a direct fit. The washer is the obvious solution, I did not try that yet, I am also aware of the need to shorten the cup, BUT I believe the cup balancing on just 2 washers with an ESC on...
I finished it almost 1 year ago and did the first run few days ago.
That was before the run...
I broke the body at several places and found that it was less resistant than any of my other cars...
Last post
Nice ride.
The ride height looks quite a bit high though. You want the dogbones flat in the rear and the chassis close to level. You might think that having it jacked up would be better but it raises the roll center and center of gravity making it...
We all know of the binding and that the planes for slipper are sometimes too deep onto the shaft....
This I never thought was possible. Check out the thread on this one.
It actually took me a fair while to understand why I couldn't get the nut on...
Last post
That definitely is something strange. I've had some machining experience with cutting threads and as far as I know the machines we use wouldn't even be able to mimic that process even if you screwed up on the machine settings. Seems like whatever...
I have just built a worlds rere, you guys prepared me well: I had new top shaft on hand; Idle gear; USA tranny case; even an 8-32 tap for bell crank nuts.
What I was not ready for where Plastic shocks!!! :(
I assume all modern cars have them....
Last post
Like harvey said you can wedge the spring with something to offset the rub. I used to use 3mm strips of that chassis protective adhesive wedged between the spring top and the collar on the opposite side of the rub to fix mine until I went BB...
I have been struggling with diffs and spur gears and the like, finally got it pretty close, and absolutely SMOKED a new set of tires :) I like this car a lot, tossed in a couple pics of my collection too
Last post
The damage in the 1st pic, was due to the ball diff being loose and slipping, it makes heat and will melt the diff gear.
Users browsing this forum: 2BornotB2, Dual and 11 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
