I can't find the link to penguin right off so hopefully someone comes on here and drops one for you. Not sure of anyone else that makes them and actually fit as good as they say Penguins does...
Todd
Peace and professionlism.....Kabunga signing off!!!
got my hands on a bnib lexan gear cover for the TRX1... I know there's quite a few of us who've hunted for one for a while now and the reason I was lucky enough to get one was thanks to a kind fellow rc10talk board member... time to spread...
Last post
hahhah, yeah, very true!!
a couple of large diameter washers should help with that!
Is there any chance of such a thing ever arising? The front bulges aside, its still a completely different animal to any of the later bodies....the side angles are the big one....a much sleaker profile, and no double facet on the panniers...
Last post
Hey guys,
Been following this thread and took some time to have a look at some Yokomo bodies I have and also some parts manuals. These are the part numbers I found (I have added them to Derby Dan's descriptions of the iconic Yokomo bug bodies)....
What are the options for gear covers on the t2's? I am currently using a cover for the Thunder Tiger Phoenix XT but it really doesn't fit very well and the plastic is cheap and wants to split. I really would like to find a rpm cover for the t2 and I...
Last post
Try playing with the b4 moulded cover. It doesn't fit, but the top hole is okay, and for the bottom hole there might be enough meat in the motor plate to be re-drilled.
So after looking on several sites, it seems like most gear covers for the rc10 t4 / b4 / sc10 can work on each other. I've also seen that while only using 1 screw, you can still mount a b4 gear cover on the old rc10.
My question now is why couldnt...
Last post
just a few more notes. It doesnt have very much clearance for a thick slipper. I dont think anything beyond the basic b4 slipper will fit. The 6 gear and stealth ones do fit but there is very little free room.
I had 2 brand new stock ones, that I had picked up at the LHS. One for the runner and and for the shelf car. Well today, my runner took one good tumble and the gear cover split. Never had that happen until now. My question is, what is everyone else...
Last post
check out racer8838 on ebay he has some clear lexan covers for the rc10 gold tubs. I have purchased a few and they are already to go no trimming just have drill or ream the screw holes.
I am currently playing about with a very lightened MMS car, and have stumbled across a really thick, ribbed gear cover I have not seen previously. It came with a rare Demon Dart bodyshell and one person (Jamie Booth) has suggested he thinks this...
Last post
Latest update comes from Ian Diboll who informed me that Nick Adams did indeed have a gear cover made through his contacts at WASP Racing. Still not got 100% confirmation that this is the one however.
does anybody make a repro jrx2 gear cover...i really need one
Last post
I am bring a few of each with me. Not a lot, as best two or so of each..... just in case someone needs something.
Very cool. Put me down for 2 as I need them both!