Turbo Optima build - Project Barney: Finished

The place for all things Kyosho.

Moderators: scr8p, klavy69

Post Reply
User avatar
Coelacanth
Approved Member
Posts: 7349
Joined: Thu Jul 29, 2010 6:20 pm
Location: Alberta, Canada
Has thanked: 16 times
Been thanked: 270 times

Turbo Optima build - Project Barney: Finished

Post by Coelacanth »

For this car, I'm focusing on building a good off-road Optima, and modernizing it as much as possible. Not quite the extensive modding & fabricating as with CYANide, but it'll be the opposite end of the spectrum as a box-art. It's also going to be a runner.

I've been acquiring aftermarket hop-up parts for the past several months. Some of those parts included some gold anodized Option House parts. I'll probably disappoint a few purists here, but those won't stay gold for long. 8) Besides, some of the gold parts had the anodizing scratched or dinged anyway, so why not?

I sprayed on some yellow-cap Easy-Off oven cleaner and removed the anodizing. This resulted in some charcoal-grey-colored parts. I wet-sanded those parts starting with 400-grit and finishing with 1000-grit sandpaper. I decided not to go any higher (it's possible to get an almost chrome-like gloss by wet-sanding with 1500, 2000-grit and then rubbing compound & polishing compound) because I wanted to make sure the anodizing sticks well.
Attachments
De-anodizedParts1.jpg
PolishedParts1.JPG
PolishedParts2.JPG
Completed projects: CYANide Onroad Optima | Zebra Gold Optima | Barney Optima | OptiMutt RWD Mid
Gallery - Coel's Stalls: Marui Galaxy & Shogun Resto-Mods | FrankenBuff AYK Buffalo | 1987 Buick GNX RC12L3

User avatar
besty22
Approved Member
Posts: 346
Joined: Tue Sep 02, 2008 8:21 am
Location: Central Coast NSW Australia

Re: A new Turbo Optima build - Project Barney

Post by besty22 »

Looking good. What colour is it going to be?
Respect - Hard Earned but Easily Lost

User avatar
jwscab
Super Member
Posts: 6479
Joined: Wed Jan 28, 2009 9:42 am
Location: Chalfont, PA
Has thanked: 10 times
Been thanked: 434 times

Re: A new Turbo Optima build - Project Barney

Post by jwscab »

based on the title, my guess would be something along the lines of purple......

User avatar
8rad
Approved Member
Posts: 799
Joined: Fri Feb 13, 2009 3:29 pm
Location: Ottawa, Canada

Re: A new Turbo Optima build - Project Barney

Post by 8rad »

based on the title, my guess would be something along the lines of purple......
NOOOOOOOOOOOOOOOOOOOOOO!
"It's not broken, it's British!"

User avatar
Coelacanth
Approved Member
Posts: 7349
Joined: Thu Jul 29, 2010 6:20 pm
Location: Alberta, Canada
Has thanked: 16 times
Been thanked: 270 times

Re: A new Turbo Optima build - Project Barney

Post by Coelacanth »

jwscab wrote:based on the title, my guess would be something along the lines of purple......
:D Don't worry, it won't be garish, I hope it'll be well-executed. The Lizard King cometh! :o
Completed projects: CYANide Onroad Optima | Zebra Gold Optima | Barney Optima | OptiMutt RWD Mid
Gallery - Coel's Stalls: Marui Galaxy & Shogun Resto-Mods | FrankenBuff AYK Buffalo | 1987 Buick GNX RC12L3

User avatar
sgirouard
Approved Member
Posts: 323
Joined: Thu Sep 23, 2010 4:58 pm
Location: Connecticut, USA
Been thanked: 3 times

Re: A new Turbo Optima build - Project Barney

Post by sgirouard »

Cant wait to see this one Marc.

Go with a midnight plum color. (Hate to date myself and make such an obscure reference) but if anyone remembers the move "The Wraith". The Demon car in that movie was midnight plum.

User avatar
nvxwax
Approved Member
Posts: 1070
Joined: Tue May 25, 2010 8:28 pm
Location: Front Royal, VA (AKA: Helltown)
Been thanked: 1 time

Re: A new Turbo Optima build - Project Barney

Post by nvxwax »

Coelacanth wrote:
jwscab wrote:based on the title, my guess would be something along the lines of purple......
:D Don't worry, it won't be garish, I hope it'll be well-executed. The Lizard King cometh! :o
Bring on the Green :)

User avatar
jwscab
Super Member
Posts: 6479
Joined: Wed Jan 28, 2009 9:42 am
Location: Chalfont, PA
Has thanked: 10 times
Been thanked: 434 times

Re: A new Turbo Optima build - Project Barney

Post by jwscab »

I don't know no shotgun skank!!!!

User avatar
sgirouard
Approved Member
Posts: 323
Joined: Thu Sep 23, 2010 4:58 pm
Location: Connecticut, USA
Been thanked: 3 times

Re: A new Turbo Optima build - Project Barney

Post by sgirouard »

Kudos Jwscab!!!

kaz_z
Approved Member
Posts: 80
Joined: Wed Mar 23, 2011 8:50 am

Re: A new Turbo Optima build - Project Barney

Post by kaz_z »

purple aint that bad :D

User avatar
Coelacanth
Approved Member
Posts: 7349
Joined: Thu Jul 29, 2010 6:20 pm
Location: Alberta, Canada
Has thanked: 16 times
Been thanked: 270 times

Re: A new Turbo Optima build - Project Barney

Post by Coelacanth »

I already have a paint scheme planned...Barney will be sporting something I haven't seen before on an RC car (which was the same motivation I had for painting the Zebra Optima)--scales. :mrgreen:
Completed projects: CYANide Onroad Optima | Zebra Gold Optima | Barney Optima | OptiMutt RWD Mid
Gallery - Coel's Stalls: Marui Galaxy & Shogun Resto-Mods | FrankenBuff AYK Buffalo | 1987 Buick GNX RC12L3

User avatar
minimini
Approved Member
Posts: 610
Joined: Fri May 16, 2008 11:31 am
Location: KWS@Hong Kong; 3.5 hours' trip to meet tiger1 and only 7,777 miles from Doug
Been thanked: 9 times

Re: A new Turbo Optima build - Project Barney

Post by minimini »

the steering knuckles seem to be some sort of aftermarket product.......right ??........:)
mini@vintage Team Yokomo/Associated
Image

User avatar
Coelacanth
Approved Member
Posts: 7349
Joined: Thu Jul 29, 2010 6:20 pm
Location: Alberta, Canada
Has thanked: 16 times
Been thanked: 270 times

Re: A new Turbo Optima build - Project Barney

Post by Coelacanth »

minimini wrote:the steering knuckles seem to be some sort of aftermarket product.......right ??........:)
Yes, Kyosho Lazer ZX-5/Duratrax Maximum ST alloy knuckles. The kind you see here used to be sold at Tower Hobbies but I can't find it now. :? Hot Racing & 3Racing make them; Hot Racing's part number is LZF2106, which will work, but the kingpin standoffs have to be filed down. The other one (that I de-anodized above) doesn't require anything, it's a perfect swap. I just can't find the header card for it anywhere... :x

Here's a comparison of stock, Hot Racing, and the unknown unit (sorry for the dark pic).

EDIT: Bingo, I found out it's a Duratrax DTXC9953, alloy knuckle for the Maximum ST/BX/MT. This one is better than the Hot Racing one, the quality of the anodizing was better and it requires no modding to fit. If you look around and are lucky, you can find them for a lot less than $29.99. :)

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSD47&P=V
Attachments
Knuckles1.jpg
Completed projects: CYANide Onroad Optima | Zebra Gold Optima | Barney Optima | OptiMutt RWD Mid
Gallery - Coel's Stalls: Marui Galaxy & Shogun Resto-Mods | FrankenBuff AYK Buffalo | 1987 Buick GNX RC12L3

User avatar
Coelacanth
Approved Member
Posts: 7349
Joined: Thu Jul 29, 2010 6:20 pm
Location: Alberta, Canada
Has thanked: 16 times
Been thanked: 270 times

Finished polishing all the parts

Post by Coelacanth »

I finished polishing the rest of the aluminum parts tonight. As before, I started with 400-grit and worked my way up to 1000-grit. The finish is shinier than satin but not as shiny as chrome. I'd probably have a belly skid-plate too but by now, you probably all know how *that* went down. :x

I have a few more parts coming in that I need to prepare before having it all sent in for anodizing.
Attachments
PolishedParts3.JPG
PolishedParts4.JPG
Completed projects: CYANide Onroad Optima | Zebra Gold Optima | Barney Optima | OptiMutt RWD Mid
Gallery - Coel's Stalls: Marui Galaxy & Shogun Resto-Mods | FrankenBuff AYK Buffalo | 1987 Buick GNX RC12L3

User avatar
EvolutionRevolution
Approved Member
Posts: 1495
Joined: Tue Feb 01, 2011 3:24 pm
Location: Netherlands
Has thanked: 20 times
Been thanked: 36 times

Re: A new Turbo Optima build - Project Barney

Post by EvolutionRevolution »

So will you go with Trinity purple (see pic) or something darker?
Attachments
newstandoffs.jpg

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post
  • New Optima Build: Project CYANide - Finished!
    by Coelacanth » » in Kyosho Forum
    121 Replies
    19817 Views
    Last post by Coelacanth
  • Next Project: Turbo Optima
    by RichieRich » » in Kyosho Forum
    44 Replies
    5847 Views
    Last post by RichieRich
  • Turbo Optima Mid + Turbo Optima Mid SE build/restore
    by j0pp3 » » in Kyosho Forum
    68 Replies
    18668 Views
    Last post by Garage Hack
  • A Friend's Turbo Optima Project...
    by FasterLouder » » in Kyosho Forum
    4 Replies
    1064 Views
    Last post by FasterLouder
  • Turbo Optima Craigslist find- project: return to stock
    by GoMachV » » in Kyosho Forum
    51 Replies
    4437 Views
    Last post by klavy69
  • Recent EBay project original turbo optima package
    by Bertros » » in Kyosho Forum
    12 Replies
    1820 Views
    Last post by Bertros
  • First one I ever had... 2019 Turbo Optima re-re build
    by emerilnut » » in Kyosho Re-Release Forum
    56 Replies
    11950 Views
    Last post by sundevil67
  • Turbo Optima build/restore
    by j0pp3 » » in Kyosho Forum
    10 Replies
    1555 Views
    Last post by cooltoys

Return to “Kyosho Forum”

Who is online

Users browsing this forum: No User AvatarGoogle [Bot] and 26 guests