saved from the closet: late 80's RC10 with vintage hop-ups
- GoMachV
- Approved Member
- Posts: 11218
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 780 times
- Been thanked: 2240 times
Re: saved from the closet: late 80's RC10 with vintage hop-u
Watch the purple power with anodized parts tho! It ate a set of gold shocks in just a few minutes on me!
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- RC10resto
- Super Member
- Posts: 2919
- Joined: Tue Sep 09, 2008 2:26 am
- Location: Los Angeles, CA
- Has thanked: 1034 times
- Been thanked: 406 times
Re: saved from the closet: late 80's RC10 with vintage hop-u
yes, yes and yes.
I thought he was still trying to get paint off the plastics, had not seen the post regarding the painted over anodized Hot Trick aluminum mount
But you can always try Lacquer thinner the Ano should be able to handle it and the paint will hate it
I thought he was still trying to get paint off the plastics, had not seen the post regarding the painted over anodized Hot Trick aluminum mount
But you can always try Lacquer thinner the Ano should be able to handle it and the paint will hate it
- GoMachV
- Approved Member
- Posts: 11218
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 780 times
- Been thanked: 2240 times
Re: saved from the closet: late 80's RC10 with vintage hop-u
And it smells good too
Yeah the castrol caught me off guard, I use Awesome a lot and it has attacked anno so I was trying the castrol- it was almost immediate. I bet it works better than oven cleaner for removing anno!
Yeah the castrol caught me off guard, I use Awesome a lot and it has attacked anno so I was trying the castrol- it was almost immediate. I bet it works better than oven cleaner for removing anno!
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
Re: saved from the closet: late 80's RC10 with vintage hop-u
Alright gurus, I need some advice. I have replaced most of the plastic components with vintage parts from ebay, because the 25 year old paint is being very stuborn and I dont have the rest of my life to scrape paint. ( I soaked the parts for days and days in brake fluid and it softened the paint up, but still had to be manually scraped off. Same result with Simple Green. My original parts were pretty bashed up anyway...)
So below is one of my old arms rear arms on the left with the replacement on the right. The forward hinge boss is probably 1/8" narrower on the replacement. Why would they have narrowed that, it looks like they came that way? Are the arms with the narrower bosses off a later car, i believe mine to be a late Edinger or early Cadillac? So now the pins I have are too long and would look silly. Should I source shorter pins? Would it be a "crime" to put the wrong arms on my car, which will otherwise be period correct? Any thoughts?
So below is one of my old arms rear arms on the left with the replacement on the right. The forward hinge boss is probably 1/8" narrower on the replacement. Why would they have narrowed that, it looks like they came that way? Are the arms with the narrower bosses off a later car, i believe mine to be a late Edinger or early Cadillac? So now the pins I have are too long and would look silly. Should I source shorter pins? Would it be a "crime" to put the wrong arms on my car, which will otherwise be period correct? Any thoughts?
-
- Approved Member
- Posts: 2022
- Joined: Sat Jan 20, 2007 4:41 pm
- Location: Cape Carteret.NC
- Been thanked: 22 times
Re: saved from the closet: late 80's RC10 with vintage hop-u
Did you try Easyoff oven cleaner yellow can and cap on painted arms?Gresed lightning can take some forms of paint.don
- vintage AE
- Approved Member
- Posts: 3012
- Joined: Fri Nov 14, 2008 1:47 pm
- Location: Sunken Lake, Nova Scotia
- Has thanked: 29 times
- Been thanked: 35 times
Re: saved from the closet: late 80's RC10 with vintage hop-u
In the past I've just used the longer pins. As long as the onside fits well, the outside doesn't really matter.
- GoMachV
- Approved Member
- Posts: 11218
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 780 times
- Been thanked: 2240 times
Re: saved from the closet: late 80's RC10 with vintage hop-u
mk-Zero wrote:..... Why would they have narrowed that, it looks like they came that way? Are the arms with the narrower bosses off a later car, i believe mine to be a late Edinger or early Cadillac? So now the pins I have are too long and would look silly. Should I source shorter pins?......
- Attachments
-
- image.jpg (7.89 KiB) Viewed 1300 times
- image.jpg (7.89 KiB) Viewed 1300 times
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
Re: saved from the closet: late 80's RC10 with vintage hop-u
Thanks guys. Maybe I'll try Easy-Off as a last ditch effort. I need some to strip the annodizing off my shocks anyway...
If that doesn't do it, I'll just run the arms I bought with the long pins.
Jeff, when did those arms come out?
Edit, nevermind Jeff, found the info on the RC10 History thread, looks like there are:
If that doesn't do it, I'll just run the arms I bought with the long pins.
Jeff, when did those arms come out?
Edit, nevermind Jeff, found the info on the RC10 History thread, looks like there are:
The new Worlds type rear arms with shorter inner hinge pin and extra bracing in the center.
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
Re: saved from the closet: late 80's RC10 with vintage hop-u
Thanks! I need to finish her up. Problem is maintaining my runners takes most of my RC time.
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
Re: saved from the closet: late 80's RC10 with vintage hop-u
Progress! I got off my ass tonight and finally died all the parts that have been preventing me from putting this biotch together:
Then started the assembly. I know the blue screws are not right for this period car, but they were what I had. I like the way that they look, but maybe I'll swap them out with the gold colored screws on my a-stamp. Anyway, for now here we go...
Ti front shock towers I made ~ 25 years ago:
ESC mount I made from a spare battery cup (thanks for the suggestion Jeff)
Hot Trick motor plate for putting an MIP SRB trans into an RC10, before they made an RC10-specific trans. The gold anno was a spot-on match to the gold of the early cars like mine
The shocks are still a filthy mess, I need to take them apart, clean, and re-assemble. I might remove the anno from them, it's pretty beat up anyway, especially the Kyosho fronts. Also need to put the MIP trans back together. Other than that, put in the electronics, finish trimming the body, and apply the decals. Decided I'm going to leave the body clear, but add the decals, since it's going to be a shelf queen, that way the cool parts will be visible . Also because I'm lazy and don't like painting, lol
Then started the assembly. I know the blue screws are not right for this period car, but they were what I had. I like the way that they look, but maybe I'll swap them out with the gold colored screws on my a-stamp. Anyway, for now here we go...
Ti front shock towers I made ~ 25 years ago:
ESC mount I made from a spare battery cup (thanks for the suggestion Jeff)
Hot Trick motor plate for putting an MIP SRB trans into an RC10, before they made an RC10-specific trans. The gold anno was a spot-on match to the gold of the early cars like mine
The shocks are still a filthy mess, I need to take them apart, clean, and re-assemble. I might remove the anno from them, it's pretty beat up anyway, especially the Kyosho fronts. Also need to put the MIP trans back together. Other than that, put in the electronics, finish trimming the body, and apply the decals. Decided I'm going to leave the body clear, but add the decals, since it's going to be a shelf queen, that way the cool parts will be visible . Also because I'm lazy and don't like painting, lol
- j-sou
- Approved Member
- Posts: 653
- Joined: Sun Feb 06, 2011 2:47 am
- Location: Fresno, CA
- Has thanked: 1 time
- Been thanked: 3 times
Re: saved from the closet: late 80's RC10 with vintage hop-u
Looks great Brian! I'm glad to see some progress on this cool car
-I never said I knew what I was doing, I just said I was gonna do it!"
- GoMachV
- Approved Member
- Posts: 11218
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 780 times
- Been thanked: 2240 times
Re: saved from the closet: late 80's RC10 with vintage hop-u
Lovin it!
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- JK Racing
- Approved Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 103 times
- Been thanked: 199 times
Re: saved from the closet: late 80's RC10 with vintage hop-u
looks good
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 13 Replies
- 2737 Views
-
Last post by mmbackpacker
-
- 20 Replies
- 3101 Views
-
Last post by Spiderman
-
- 18 Replies
- 2218 Views
-
Last post by treehugger
-
- 105 Replies
- 10895 Views
-
Last post by Mr. ED
-
- 34 Replies
- 2371 Views
-
Last post by scr8p
-
- 39 Replies
- 5794 Views
-
Last post by RichieRich
-
- 6 Replies
- 1367 Views
-
Last post by DennisM
-
- 0 Replies
- 457 Views
-
Last post by USAPaulo
Who is online
Users browsing this forum: Bing [Bot] and 70 guests