Some tuning options for racers and runners
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
Re: Some tuning options for racers and runners
Cool! Funny that you got those first, you ordered them after the arms, didn't you?
-
- Approved Member
- Posts: 1167
- Joined: Fri Mar 11, 2011 4:20 pm
- Location: Houston
- Been thanked: 4 times
Re: Some tuning options for racers and runners
Over a week after in the same material. I even ordered 4 Invencer prototype arms in this same batch. Go figure.
Raborn Racing Originals Shapeways store
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
Re: Some tuning options for racers and runners
So Jeff (GoMachV) and I are taking on the 2-gear stealth trans case/4WD project together. Here's the first pass. There are no mounting provisions on so we can have freedom to play with different mounting options and how it will fit with the other components up front.
-
- Approved Member
- Posts: 1167
- Joined: Fri Mar 11, 2011 4:20 pm
- Location: Houston
- Been thanked: 4 times
Re: Some tuning options for racers and runners
He wanted me to help out with some front arms and I told him I would but I've been so busy with work and family that I just haven't had much time. Hopefully you can help him with those.
Raborn Racing Originals Shapeways store
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
Re: Some tuning options for racers and runners
Yeah, I can do it, no problem.fredswain wrote:He wanted me to help out with some front arms and I told him I would but I've been so busy with work and family that I just haven't had much time. Hopefully you can help him with those.
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
Re: Some tuning options for racers and runners
Got a nice package from Shapeways yesterday:
Stealth cap and spacers 25 degree kickup arm mounts 10 degree caster shims 0 degree toe x 3 deg antisquat rear arm mounts +5 degree caster blocks -5 degree caster blocks As soon as I verify all this stuff works, I'll make them avalable on Shapeways.
Oh, and not to forget the 2-gear Stealth box
Stealth cap and spacers 25 degree kickup arm mounts 10 degree caster shims 0 degree toe x 3 deg antisquat rear arm mounts +5 degree caster blocks -5 degree caster blocks As soon as I verify all this stuff works, I'll make them avalable on Shapeways.
Oh, and not to forget the 2-gear Stealth box
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
Re: Some tuning options for racers and runners
I finally got around to designing the "bolt in" mid-motor rear bulkhead. This bulkhead uses the rear two 6-gear mounting holes and puts the bulkhead in the correct position for a mid-motor conversion. Use this with either my bolt-in 3-gear or 4-gear mid motor case and you don't have to drill any holes in the rear of pan. Prevents "Swiss Cheeseing" of the chassis, like I had to do on my B1M to mount everything. I also trimmed the "wings" off to save you some money (less material = lower cost from Shapeways) and retained the World's and Team ball stud holes, and added another below each for more tuning options.
Once I get one of these made for myself and check it out I'll make them available.
Once I get one of these made for myself and check it out I'll make them available.
-
- Approved Member
- Posts: 1167
- Joined: Fri Mar 11, 2011 4:20 pm
- Location: Houston
- Been thanked: 4 times
Re: Some tuning options for racers and runners
I was wondering what you were going to do with the battery pocket. It looks like the bulkhead is moved forward a little bit as opposed to just having the proper hole spacing.
Raborn Racing Originals Shapeways store
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
Re: Some tuning options for racers and runners
Yeah, you got it, the bulkhead is moved forward. If i just put holes in the original location but changed the spacing the bulkhead would be back too far. With this bulkhead and the bolt-in trans cases the outdrives are in the stock location and the trans and bulkbead are the right spacing to use the stock trans brace.
- JK Racing
- Approved Member
- Posts: 4603
- Joined: Thu Jul 19, 2007 2:32 pm
- Location: Placentia, CA
- Has thanked: 103 times
- Been thanked: 199 times
Re: Some tuning options for racers and runners
Brian, I have a donor chassis (A stamp) to test fit parts Just need to finish taking the extra stuff off it.
--Joey --
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Vintage A&L and Factory Works
Old School Racer & Vintage RC Car nut
JKRacingRC.com
Re: Some tuning options for racers and runners
Did I miss it....how do I place an order for the 6215 steering blocks?
RC10 Short Arm | Novak Tempest ESC | Tamiya Torque Tuned 25T | Savox 1258 | Stealth Trans w/ Exotek Slipper Eliminator (geared 24/81)
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
- GoMachV
- Approved Member
- Posts: 11201
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 768 times
- Been thanked: 2215 times
Re: Some tuning options for racers and runners
There's a link to his shapeways shop in his signature
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 2:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
Re: Some tuning options for racers and runners
Yup, thanks Jeff. I need to start a "For Sale" thread with all the info, just been busy
Re: Some tuning options for racers and runners
Thanks. I was able to find them on the Shapeways website by typing in "6215". I'll be ordering a set.
RC10 Short Arm | Novak Tempest ESC | Tamiya Torque Tuned 25T | Savox 1258 | Stealth Trans w/ Exotek Slipper Eliminator (geared 24/81)
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 719 Views
-
Last post by polarbear
-
- 3 Replies
- 1637 Views
-
Last post by mytimac
-
- 13 Replies
- 1590 Views
-
Last post by Brandon G
-
- 1 Replies
- 584 Views
-
Last post by integra22t
-
- 11 Replies
- 2356 Views
-
Last post by RC104ever
-
- 0 Replies
- 609 Views
-
Last post by Phin
-
- 2 Replies
- 1046 Views
-
Last post by Taylorm
-
- 2 Replies
- 740 Views
-
Last post by Westcoast10z
Who is online
Users browsing this forum: Facebook [Bot], Google [Bot] and 22 guests