Page 1 of 1

Original 6 Gear transmission to Stealth w/VTS slipper parts list

Posted: Fri Mar 17, 2017 11:31 am
by Stuntmanmike1975
I recently acquired a super clean Andy's conversion car with most of the available options from the time. It included the Graphite chassis, Andy's bulkheads, Andy's Shock Towers, Andy's trailing Arms, Front arms & Andy's body. It came with a "Pink" six gear transmission that I'm assuming was dyed or was it something else? (if anyone knows do tell)

My other question is:
In converting this to a modern brushless power plant with the stealth transmission exactly what parts will I need to use the b4-b6 VTS slipper etc??

I'm sure this has been go over many times here but I searched & searched these forums & couldn't find it, I'm sorry.

Re: Original 6 Gear transmission to Stealth w/VTS slipper parts list

Posted: Fri Mar 17, 2017 11:48 am
by jwscab
You will need the entire stealth trans minus the slipper assembly and top shaft. Get a B4 topshaft and the v2 slipper plates spur gear and slipper discs.

If you have an original 6 gear motor plate, you will need to drill another hole to mount to the stealth.

Re: Original 6 Gear transmission to Stealth w/VTS slipper parts list

Posted: Fri Mar 17, 2017 11:56 am
by Stuntmanmike1975
^^
Hey thanks man.

Re: Original 6 Gear transmission to Stealth w/VTS slipper parts list

Posted: Mon Mar 12, 2018 5:33 pm
by blk05wrx
I'm doing the B4 Top Shaft upgrade to my Stealth Transmission and I thought I'd post the part numbers needed in case anyone else is wondering.

You will need:

ASC9601 - Top Shaft
ASC7486 - V2 Slipper Hubs (X2)
ASC9603 - Slipper Pads (X2)
ASC9651 - Spur Gear (81T)
ASC9739 - Slipper Spring
ASC7486 - Slipper Spring Washer
ASC6629 - 5-40 Diff Locknut

I managed to find all parts minus the top shaft on eBay taken from another car. I should get everything this weekend and I'll update how it goes. My trans slips a bit with 13T Brushless on a carpet track. I'm hoping this will do the trick.