The Orlandoo Hunter 1/35 micro scaler
- GoMachV
- Approved Member
- Posts: 11196
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 765 times
- Been thanked: 2205 times
Re: As if I didn't have enough projects part 32, the Orlando
Well, I didn't take a lot of pics of the next few steps as it was so simple. Laid in the brass optional gear set (note they are a finer pitch and not compatible with stock plastic gears). I also still need to final adjust the rod lengths, making sure the axles are square and 4* tipped per the manual.
I took some time and stripped the receiver of its male pins, and hard wired the speed control to it. Works great and so much smaller! Looks like I will have plenty of room for a drivers bust at least. I ordered another smaller battery pack, this one is a little tall and a little long for where it goes. Stepping down to a 300mah. Test run went great but I'll wait for the proper pack to make a short video.
Also, while i did install the headlight led's, I don't have the proper resistors so I ordered them, along with some extra orange and red prewired smd led's for markers and brake lights. I also ordered a switch to use on the fourth channel- maybe I'll find a use for it. More pics to come as I finish it up
I took some time and stripped the receiver of its male pins, and hard wired the speed control to it. Works great and so much smaller! Looks like I will have plenty of room for a drivers bust at least. I ordered another smaller battery pack, this one is a little tall and a little long for where it goes. Stepping down to a 300mah. Test run went great but I'll wait for the proper pack to make a short video.
Also, while i did install the headlight led's, I don't have the proper resistors so I ordered them, along with some extra orange and red prewired smd led's for markers and brake lights. I also ordered a switch to use on the fourth channel- maybe I'll find a use for it. More pics to come as I finish it up
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- GoMachV
- Approved Member
- Posts: 11196
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 765 times
- Been thanked: 2205 times
Re: As if I didn't have enough projects part 32, the Orlando
The 300mah pack is perfect! I also got a couple of switches so I can use the fourth channel for something. Not sure what tho! Lol. I'll have plenty of room for a decent size interior now. I should have the lighting done this week once my resistors show up
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- limestang
- Approved Member
- Posts: 890
- Joined: Tue Sep 27, 2011 9:48 am
- Location: Fort Worth, TX
- Has thanked: 12 times
- Been thanked: 152 times
Re: As if I didn't have enough projects part 32, the Orlando
Cool Jeff - Now hurry up and make the rest of the mini RC10 parts to along with my awesome shock tower:)
- Limestang
- Limestang
- GoMachV
- Approved Member
- Posts: 11196
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 765 times
- Been thanked: 2205 times
Re: As if I didn't have enough projects part 32, the Orlando
I wish I knew how! I can only do the flat stuff. I think Fred swain has most if not everything drawn up for a stock rc10, id love to see the parts shrunk down and printed!
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- sandkil
- Approved Member
- Posts: 1042
- Joined: Tue Jan 15, 2013 10:00 am
- Location: Stockholm Sweden
- Has thanked: 656 times
- Been thanked: 462 times
Re: As if I didn't have enough projects part 32, the Orlando
GoMachV wrote:I wish I knew how! I can only do the flat stuff. I think Fred swain has most if not everything drawn up for a stock rc10, id love to see the parts shrunk down and printed!
^^^^Now that would be cool
- Incredible_Serious
- Approved Member
- Posts: 3389
- Joined: Tue Jan 29, 2008 12:09 am
- Location: Melbourne, Victoria, Australia
- Has thanked: 1348 times
- Been thanked: 806 times
Re: As if I didn't have enough projects part 32, the Orlando
How does your missus manage?klavy69 wrote:hell, my eyes hurt just looking at it let alone thinking of working on something this small
Todd
Osiris is the key.
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
- GoMachV
- Approved Member
- Posts: 11196
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 765 times
- Been thanked: 2205 times
Re: As if I didn't have enough projects part 32, the Orlando
....and Alex swoops in for the kill!
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- Incredible_Serious
- Approved Member
- Posts: 3389
- Joined: Tue Jan 29, 2008 12:09 am
- Location: Melbourne, Victoria, Australia
- Has thanked: 1348 times
- Been thanked: 806 times
Re: As if I didn't have enough projects part 32, the Orlando
Swoops s-l-o-w-l-y.... that's been there for a few days! I think Special K is Thumbs-baiting.......GoMachV wrote:....and Alex swoops in for the kill!
As for your efforts, GMV, this is looking like a great build.... although the subjects in the pictures are probably bigger on the PC that in person!
Watching....
Alex
Osiris is the key.
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
- klavy69
- Moderator
- Posts: 5142
- Joined: Thu May 29, 2008 4:11 pm
- Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
- Has thanked: 544 times
- Been thanked: 254 times
Re: As if I didn't have enough projects part 32, the Orlando
How about this one:
I thought long and hard about hitting the submit button on that post and figured what the hell...someone will jump on it.
Todd
I thought long and hard about hitting the submit button on that post and figured what the hell...someone will jump on it.
Todd
Peace and professionlism.....Kabunga signing off!!!
- Incredible_Serious
- Approved Member
- Posts: 3389
- Joined: Tue Jan 29, 2008 12:09 am
- Location: Melbourne, Victoria, Australia
- Has thanked: 1348 times
- Been thanked: 806 times
Re: As if I didn't have enough projects part 32, the Orlando
I would have expected someone else, but I think he's been too busy celebrating his birthday.....klavy69 wrote:How about this one:
I thought long and hard about hitting the submit button on that post and figured what the hell...someone will jump on it.
Todd
Osiris is the key.
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
- klavy69
- Moderator
- Posts: 5142
- Joined: Thu May 29, 2008 4:11 pm
- Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
- Has thanked: 544 times
- Been thanked: 254 times
Re: As if I didn't have enough projects part 32, the Orlando
Its more like a 50/50 gamble between the 2 I was thinking would react to itIncredible_Serious wrote:I would have expected someone else
Todd
Peace and professionlism.....Kabunga signing off!!!
- GoMachV
- Approved Member
- Posts: 11196
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 765 times
- Been thanked: 2205 times
Re: As if I didn't have enough projects part 32, the Orlando
Lmfao!
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- vintage AE
- Approved Member
- Posts: 3012
- Joined: Fri Nov 14, 2008 1:47 pm
- Location: Sunken Lake, Nova Scotia
- Has thanked: 29 times
- Been thanked: 35 times
Re: As if I didn't have enough projects part 32, the Orlando
The first page was good, but the second was a whole other level... yeah, where is thumbs with some good comments?
- Incredible_Serious
- Approved Member
- Posts: 3389
- Joined: Tue Jan 29, 2008 12:09 am
- Location: Melbourne, Victoria, Australia
- Has thanked: 1348 times
- Been thanked: 806 times
Re: As if I didn't have enough projects part 32, the Orlando
klavy69 wrote:Its more like a 50/50 gamble between the 2 I was thinking would react to itIncredible_Serious wrote:I would have expected someone else
Todd
GoMachV wrote:Lmfao!
[youtube]DklJ9ITPisU[/youtube]
Osiris is the key.
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6 Replies
- 581 Views
-
Last post by SnoopMaxx
-
- 0 Replies
- 395 Views
-
Last post by Eau Rouge
-
- 20 Replies
- 364 Views
-
Last post by scr8p
-
- 25 Replies
- 2138 Views
-
Last post by Ron Jeremy
-
- 6 Replies
- 2254 Views
-
Last post by TriAdX
-
- 23 Replies
- 3221 Views
-
Last post by Coelacanth
-
- 11 Replies
- 723 Views
-
Last post by Mr. ED
-
- 4 Replies
- 1019 Views
-
Last post by rcnoob95
Who is online
Users browsing this forum: No registered users and 0 guests