It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
I'm using a GT trans in my car due to its lay down style. Looking to lower ratio to 2.25 if possible. Will the buggy gears fit the case of the GT trans or is the spacing all wrong?
Last post
New question, is the top shaft gear a press fit gear or is it all one piece? One side looks solid the other looks like 2pc
Just rebuilt my 6 gear tranny. I have a 54 tooth spur gear (64 pitch I think it is). What size pinion should I use for a stock motor? Also does anyone know what that Tranny gear ratio is?
tbfoto
Last post
I have always used 1.85 when figuring gear ratios out.
Your gearing is going to depend on the track your racing at, or if bashing, how much speed/runtime/heat your want or are getting.
54 @ 32 pitch = 81 @ 48 pitch (most all modern offroad cars...
forgive me for the stupid question that was probably answered already.
I am really confused as to gear ratio. As some of you have read I have a 10T and a T2. The T2 does not have a transmission, only some parts that came on it. I am trying to...
Last post
Thanks Erich, I have the manuals. I have the original 10T and dowloaded the T2. I just could find anything about how it was different. Thanks for the info though greatly appreciated. I bought my 10T in 93 and mine came with an 87 spur gear. I also...
Hey guys, new to the site, and new to electric rc. Just got a rc10t3 and converted it to a brushless. I ended up with a 5200kv 6.5t motor and was wondering what gearing I should use. Using the stock 87/20 now and seems to top out very fast. Looking...
Last post
Just get a temp gun and more pinions. Your tire diameter makes a difference.
I have an RC10T3 with stealth tranny, Reedy DS Spec motor, Novak 610RV ESC, 3k NiMh packs and 14/54 gearing. My two buggies have the six gear tranny. One will have a Novak 610RV using a Speed Gem 2 (blue can) and has 17/87 gearing. The other has a...
Last post
Thank you sir for the wealth of info. :) That is just awesome.
Ok so I consider myself a bit of a numpty when it comes to figuring this stuff out but I would like to work out what ratio suits what motors etc... I have a few aftermarket 48dp and .6 module spurs and would like to better understand gearing and...
Last post
You are right, original there were only two spur clusters and with that two pinion’s. So CRP mad an adjustable motor plate to fix that problem. Otherwise the gear-box layout is the same as the Ultima. :D
