I’ve tried- they don’t offer just the stub axle. We use them for the Ten4 short arm and they force you to buy the whole thing
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas Factory Works website
Hi all, the intention of this post is to serve as a reference point detailing how to duplicate some of the rear end setups I've used and get a lot of questions on.
I'll preface this by stating that there are a lot of different CVA/CVD and...
Last post
Very good 8) Thanks for taking the time to explain in great detail all the items necessary for this conversion.
Here are some pics that had been sent to me earlier, and are now public which is why I am posting them at this time as I was just notified that it is on their webpage, of one of the bodies & wings I painted up for Associated prior to the...
Last post
Anyone else have a source for OOS JConcepts parts besides the bay?
I just recently dug my 1988ish RC10 out to get back into RC. I have been having trouble finding rear axle parts. I wanted to install a CVA but the ones I found on Ebay are really expensive at $89 and $109. Is there an upgrade? Do people swap out the...
Last post
I wanted to swap out the dog bones for CVA but it sounds like that may be more trouble than it is worth having an early version of the RC10. I am going to put it back together and see how it goes.
I think I am missing 1 of the springs for the dog...
I wont bore you with the step by step pics of my build, as it is basically standard apart from replacing the bushings with bearings. Were I did go away from standard is by using a Viper body instead of the Protech. I also have a different rear wing...
clintf, 
mark, 
morrisey0 and 16 guests