I'm searching for a 3.2mm = 0.125" diam hinge pin with a lenght of 1.03"
I think that AE 6227 king pin is 1", but that is a tad too short for my application.
I have in my boxes one hinge pin that meassures 1,03" in legth, but I do not know whats it for. Could it be rc10ds, Losi or....?
jwscab wrote: ↑Thu Mar 08, 2018 8:37 am
Is it 1.03" overall, including the e-clip grooves?
If you give me the dimension inside the e-clip grooves I can make a pair out of titanium (all I have right now).
Oh damn. I measured it wrong.
I measured the total width at start.
So its not 6227 = 1.02"
I would need about 0.94" inside the e-clip grooves.
Thanks jwscab. I will hold on to that offer if I do not find stock ones.
ok. let me know....I'm on east coast USA outside Philadephia, so would need to ship from there, just fyi. In case you are able to find one closer or on the same continent.
Hey all,
I'm using SC10 caster and steering blocks for a custom build and I'm having some trouble finding hinge pins - or rod material to make them.
Apparently AE changed from 1/8 to 0.110 diameter sometime prior to the B4? Anyway, the set is...
Last post
I agree with the Porsche needing have the engine mounted in the rear. That's why i wanted to slide a DS chassis uunder a Porsche body...for the rear engine handling characteristics.
Now when i did the Pantera DS...i used a mid engine mounted...
I searched the site a bit but didn't find much. I was wondering if stock RC10 hinge pins are available still? I looked on the tower site but didn't find much too explanitory? Any help with part no's or sources would be much appreciated. I just got a...
Last post
thanks temple and scrape, that's exactally what I was hoping for!!!!
Maybe this could interest some here so I thought it could be usefull to share my DIY custom hinge pins. I was tired off always having to search for the correct hinge pins for custom projects so came up with this idea of doing my own custom length...
Last post
You can also use .125 piano wire in a pinch (or whatever diameter $.59 wire your application needs), too.
The bummer about building up from parts is that the little stuff holds up projects. Things like E-clip hinge pins. I can probably make some out of steel rod, but if there's a commercial source I'd rather buy them and they will probably be nicer than...
Last post
For the rear inner hinge pins, RPM is selling them (#70590). I actually need those, so that's a good thing. I'll have to watch for the JC Racing production.
Just note that those are the longer ones. Later models (Worlds, late CE and TC, and...
Has anyone found a set of captured hinge pins that fit the outer hings pins on an RC10? Even with e-clips, one of mine fell off 3 times. I need a more permanent solution.
Last post
Yeh, they came up when searching google. I want a solution that does NOT include C clips.
There was such solution in the second thread. It also reduces some play:
For a runner I would use a set screw in the mount. Grind a bit of the hinge pin...
Ok I have a question on hinge pin replacement. I got my new YR4 bulkheads and a new set of lower control arms but I cant find any original pins for this thing. I reamed my old bulkheads and arms to RC10 size 1/8 but I dont want to do this with all...