In my B6 I just replaced my 600z with an Orion R10.1 (in Blinky) and it seems so much faster now. Is that right, does the type and price of an ESC make that much of a difference? I literally made no other changes. I was always under the impression that a “just stock” type of ESC would function about the same as a modified ESC in Blinky...
I have a Hobby Wing Just Stock on my T5M, I'm thinking of getting a Reedy 510R and moving the HW to my son's B4.2 to start learning how to drive properly on the track.
I just purchased a Novak T4 esc that looks to be nos. Any pros and cons to this one?
Does it have reverse? Going in an 84 rc10. Thanks
Last post
Here's a link for the Novak T1 & T4 manual if you'd like. I just purchased a couple Novak ESC's for a couple of my older RC's. Was going to get a T1 and Duster, but got a Rooster and a Super Rooster due to the Roosters having reverse.
I'm finishing up my Losi Jrx-Pro and want to find the speed control I used to use long ago. It was made by Tekin, and it was squard with a keypad on the top...no heatsinks or anything. It was an awesome ESC for its time. Can anyone help me out with...
Last post
I'll take a look see if I can find that thing somewhere.
I was hoping to take my vintage losi xx-4 and give it a brushless motor / esc system. The hobbywing 10BL120 SD had good reviews for 4wd buggies. So this seemed like a good option.
on the website it says Minimum 70C suggested, lower C rating may be...
Last post
I have 4 BL120's all are great and powerful for how affordable they are, I run iP lipo 6200mah 120c shorty under $60.00 with 5mm bullet connectors.
If you want to keep the vibe vintage grab some Anderson Powerpole connectors (litespeed used them...
As above. Why is there not a single receiver / Esc unit on the market? Is there some technological hindrance to having such a single unit combination. Rf interference? IDK. :?:
Last post
Tamiya was the last hobby-grade company I recall doing CPR units, which was their combined ESC and receiver. They were still selling them in XB TT01 cars a few years ago, but that model no longer seems to be on their website.
HI!... O.k I've been running the Mamba Monster ESC/MOTOR combo for years in a bunch of my 1/8TH scale cars/trucks. I've always ran two 7.4 volt lipo's together to get the 14.8 volts. Now I bought a single 18.5 volt lipo due to I did a electric...
based upon a few suggestions, but I think the 3s battery might be overkill (from what I'm reading now).
Is there a way to limit it or should I look at returning the battery/charger and get something else? I was...
Last post
Some of my parts came in today, to include the 3S battery. I have ordered a 2S and it should be here in a couple days with similar dimensions. Using the 3S for layout placement, I was wondering what the best way to fit the battery into the chassis....
