FINAL RUN of the Scale Nuts & Wrench Sets, Info & Giveaway!
Moderator: toyranosaur
- toyranosaur
- Business Member
- Posts: 233
- Joined: Thu Jul 03, 2008 8:50 am
- Location: USA
- Been thanked: 1 time
FINAL RUN of the Scale Nuts & Wrench Sets, Info & Giveaway!
OK fellow Scale enthusiasts! Our next offering is the ever-popular Alloy Scale Lug Nuts & Wrench Set! Thses have been many people's favourite product to date, and were the product that got REC off the ground. Why 'Final Run'? It is becoming more widely known that I will be phasing out R/C products over the next 6 to 12 months and pursuing other endeavours. Therefore, all items from here on out will NOT EVER be re-issued: This affects rarity, availability and value like never before, so now is the time if you want something!
There are 2 styles to choose from:
-A set of ALL 8-BOLT
-OR a set of 'Mixed' which has TWO OF EACH STYLE if you'd like Warn lockers on the front & '8-Bolts' on the rear.
They are 3/8" dia. and use a very tight press-fit Nylock nut threaded to fit Tamiya/Axial M4x.7 axle threads: This is superior to merely tapped & threaded nuts, as they retain the Nylok insert so you don't need to 'Loc-Tite' them on. The special wrench is necessary, as the nuts are cylindrical just like most 1:1's, and engage the nut faces to leave people scratching their heads how you got 'em on...
We are the originators of this design, and the price has remained the SAME for almost 8 years: These have been copied but never duplicated! (And the copies were either much pricier & not nearly as detailed, or cheap tapped pieces, or plastic, or...) These have sold like hotcakes the 3-4 times we've offered them over the years- Guys who got some wished they'd have gotten more, and guys who didn't order in time were Emailing me pleading for a set, seriously. So, make life easy & put your deposit down before it's too late! Scale is all about details, and those factory lug nuts ain't doing your rig any favours in the realism department- Go check it out & see how they're destroying the realism..... (NOTE: Acommodations may be required depending on your axle length- Trim, spacer, etc. so the axle does not come through the face of the nut, Duh.)
Price, Shipping, & Order Info - READ ALL BEFORE ORDERING!
Not to be a meany here, but I must now insist upon uniformity of orders. BE ADVISED that failure to read and follow these simple instructions may get you an immediate refund of your deposit, which you must re-submit it as per the following! Be sure I have all your info-Ship addy, choice of nuts, etc. WITH YOUR DEPOSIT. Simply click under the pics below, selecting the nuts you want, and change the quantity as needed.
Price is $29.99 each (includes shipping in the US)
International orders will be charged only $7 per order shipping(Even if you buy several)
All that is required to get on the cut list is a deposit of $5 per set!
Do NOT send as 'Gift', and be SURE I have your shipping address!
Balance Due's will ONLY be sent to the same Paypal address as the deposit came from, just before they're ready to ship
Only US Dollars accepted (Duh)
Ship date is 'Estimated', as I never know how many I'll be making
Canadian buyers, please allow up to 6 weeks for delivery-It's your P.O., not me!
TO BUY WITHOUT DEPOSIT
To purchase outright (No deposit,) pmts. (Including shipping of $7 for Int'l.s) may be made by sending to my PP address of [email protected] Make SURE to add a note which nuts you want!
Remember, these, like all of our offerings, are custom made in the REC Skunkworks, and are ONLY available for a SHORT TIME to deposit paying customers! We are a specialty manufacturer for discerning individuals, not a hobby shop, so do NOT maintain an inventory! Please submit your deposit of $5 PER ORDER (Or full payment if you like) by the March 21, 2014 cutoff date (10 days): The next day I start cutting, so be on the list of guys who do not compromise. If you're unsure how I do things, take just a minute & go to http://www.rogueelementcomponents.com : All will be made clear.
You will be notified of your balance due via Paypal a bit before the Estimated Shipping Date. Simple!
Feel free to contact me with any questions, E-mail is probably best.
Many Thanks!
Chris Cazan, Rogue Element Components
Paypal/Email address: [email protected]
Deposit Due/Order Cutoff date: March 21st, 2014
Estimated Shipping Date: April 20th, 2014
----------------------------GIVEAWAY-------------------------------
So! Ya know the drill. Post here, praising my skills and personal good looks, and MAYHAP you'll be rewarded vit der FREE set of nuts & wrench, your choice of style! Difficult and risky, I know....Contest ends and winner picked on March 18th, so lots of luck to all! Chris REC
There are 2 styles to choose from:
-A set of ALL 8-BOLT
-OR a set of 'Mixed' which has TWO OF EACH STYLE if you'd like Warn lockers on the front & '8-Bolts' on the rear.
They are 3/8" dia. and use a very tight press-fit Nylock nut threaded to fit Tamiya/Axial M4x.7 axle threads: This is superior to merely tapped & threaded nuts, as they retain the Nylok insert so you don't need to 'Loc-Tite' them on. The special wrench is necessary, as the nuts are cylindrical just like most 1:1's, and engage the nut faces to leave people scratching their heads how you got 'em on...
We are the originators of this design, and the price has remained the SAME for almost 8 years: These have been copied but never duplicated! (And the copies were either much pricier & not nearly as detailed, or cheap tapped pieces, or plastic, or...) These have sold like hotcakes the 3-4 times we've offered them over the years- Guys who got some wished they'd have gotten more, and guys who didn't order in time were Emailing me pleading for a set, seriously. So, make life easy & put your deposit down before it's too late! Scale is all about details, and those factory lug nuts ain't doing your rig any favours in the realism department- Go check it out & see how they're destroying the realism..... (NOTE: Acommodations may be required depending on your axle length- Trim, spacer, etc. so the axle does not come through the face of the nut, Duh.)
Price, Shipping, & Order Info - READ ALL BEFORE ORDERING!
Not to be a meany here, but I must now insist upon uniformity of orders. BE ADVISED that failure to read and follow these simple instructions may get you an immediate refund of your deposit, which you must re-submit it as per the following! Be sure I have all your info-Ship addy, choice of nuts, etc. WITH YOUR DEPOSIT. Simply click under the pics below, selecting the nuts you want, and change the quantity as needed.
Price is $29.99 each (includes shipping in the US)
International orders will be charged only $7 per order shipping(Even if you buy several)
All that is required to get on the cut list is a deposit of $5 per set!
Do NOT send as 'Gift', and be SURE I have your shipping address!
Balance Due's will ONLY be sent to the same Paypal address as the deposit came from, just before they're ready to ship
Only US Dollars accepted (Duh)
Ship date is 'Estimated', as I never know how many I'll be making
Canadian buyers, please allow up to 6 weeks for delivery-It's your P.O., not me!
TO BUY WITHOUT DEPOSIT
To purchase outright (No deposit,) pmts. (Including shipping of $7 for Int'l.s) may be made by sending to my PP address of [email protected] Make SURE to add a note which nuts you want!
Remember, these, like all of our offerings, are custom made in the REC Skunkworks, and are ONLY available for a SHORT TIME to deposit paying customers! We are a specialty manufacturer for discerning individuals, not a hobby shop, so do NOT maintain an inventory! Please submit your deposit of $5 PER ORDER (Or full payment if you like) by the March 21, 2014 cutoff date (10 days): The next day I start cutting, so be on the list of guys who do not compromise. If you're unsure how I do things, take just a minute & go to http://www.rogueelementcomponents.com : All will be made clear.
You will be notified of your balance due via Paypal a bit before the Estimated Shipping Date. Simple!
Feel free to contact me with any questions, E-mail is probably best.
Many Thanks!
Chris Cazan, Rogue Element Components
Paypal/Email address: [email protected]
Deposit Due/Order Cutoff date: March 21st, 2014
Estimated Shipping Date: April 20th, 2014
----------------------------GIVEAWAY-------------------------------
So! Ya know the drill. Post here, praising my skills and personal good looks, and MAYHAP you'll be rewarded vit der FREE set of nuts & wrench, your choice of style! Difficult and risky, I know....Contest ends and winner picked on March 18th, so lots of luck to all! Chris REC
- Incredible_Serious
- Approved Member
- Posts: 3391
- Joined: Tue Jan 29, 2008 12:09 am
- Location: Melbourne, Victoria, Australia
- Has thanked: 1348 times
- Been thanked: 806 times
Re: FINAL RUN of the Scale Nuts & Wrench Sets, Info & Giveaw
As has become the norm with your products, Chris, these are awesome items. You should be congratulated on these, not just for how great they are, but for making them available one last time.... you guys out there, if you want them, don't wait, send your deposits in NOW!!!
Now, to see if the planets will align enough for me to be able to secure a set.... one way or the other
Alex
Now, to see if the planets will align enough for me to be able to secure a set.... one way or the other
Alex
Osiris is the key.
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
"The world looks so much better through beer goggles... except Farmer in his underwear" - Ken
Look out for Todd K. - he's a convicted serial killer!!!
- shodog
- Approved Member
- Posts: 3816
- Joined: Thu Oct 05, 2006 3:09 pm
- Location: Washington
- Has thanked: 3 times
- Been thanked: 86 times
Re: FINAL RUN of the Scale Nuts & Wrench Sets, Info & Giveaw
These are super cool nuts. Don't miss out on these. Please put me in the running for the giveaway drawing.
- SFC K
- Approved Member
- Posts: 1336
- Joined: Tue Nov 30, 2010 9:24 pm
- Location: Oakdale, MN
- Has thanked: 47 times
- Been thanked: 9 times
Re: FINAL RUN of the Scale Nuts & Wrench Sets, Info & Giveaw
Very Nice! Glad to see these back for one more round! You make some amazing products Chris and will be surly missed by all once you transition out of RC custom parts.
Thanks for the chance.
Jeff
Thanks for the chance.
Jeff
Jeff
- klavy69
- Moderator
- Posts: 5142
- Joined: Thu May 29, 2008 4:11 pm
- Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
- Has thanked: 544 times
- Been thanked: 254 times
Re: FINAL RUN of the Scale Nuts & Wrench Sets, Info & Giveaw
I usually build an r/c around a set of tires( ) but these make me want to start with the wheel nuts first . hopefully its in the cards this time around....
Todd
p.s. you still have a couple sets of the stealth spacers set aside for me Chris ?
Todd
p.s. you still have a couple sets of the stealth spacers set aside for me Chris ?
Peace and professionlism.....Kabunga signing off!!!
Re: FINAL RUN of the Scale Nuts & Wrench Sets, Info & Giveaw
Very nice. In for the draw.
"It's not broken, it's British!"
- Diamond Dave
- Approved Member
- Posts: 1497
- Joined: Tue Nov 29, 2011 1:42 am
- Location: Calgary
- Has thanked: 538 times
- Been thanked: 102 times
Re: FINAL RUN of the Scale Nuts & Wrench Sets, Info & Giveaw
Your good looks and personal wit aside Chris, I am in for more than a few sets of these. Shodogs pic of them is right close to what mine look like. Nice work Shodog!
One better, Your nuts are great Chris! Long live REC!
One better, Your nuts are great Chris! Long live REC!
- limestang
- Approved Member
- Posts: 890
- Joined: Tue Sep 27, 2011 9:48 am
- Location: Fort Worth, TX
- Has thanked: 12 times
- Been thanked: 152 times
Re: FINAL RUN of the Scale Nuts & Wrench Sets, Info & Giveaw
Waste your money on all the rest or try Rogue Element Components for the very best!!!!!!
Very pleased with everything I have purchased from Chris.
- Limestang
Very pleased with everything I have purchased from Chris.
- Limestang
- TOLITS
- Approved Member
- Posts: 67
- Joined: Tue Nov 12, 2013 12:17 pm
- Location: Glendale, CA.
- Been thanked: 1 time
Re: FINAL RUN of the Scale Nuts & Wrench Sets, Info & Giveaw
That's awesome, custom locknut for a showroom scaler.
- flipwils11
- Approved Member
- Posts: 1904
- Joined: Sun Feb 14, 2010 10:30 pm
- Location: St Paul, MN
- Been thanked: 15 times
Re: FINAL RUN of the Scale Nuts & Wrench Sets, Info & Giveaw
Now those are just sexy Now to see if I have anything they might work on.
Paul.
Paul.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 34 Replies
- 7238 Views
-
Last post by Johnboy72
-
- 9 Replies
- 2661 Views
-
Last post by Diamond Dave
-
- 14 Replies
- 3927 Views
-
Last post by toyranosaur
-
- 21 Replies
- 5112 Views
-
Last post by toyranosaur
-
- 11 Replies
- 3652 Views
-
Last post by mikea96
-
- 20 Replies
- 4417 Views
-
Last post by dsmith
-
- 14 Replies
- 3151 Views
-
Last post by Diamond Dave
-
- 23 Replies
- 2615 Views
-
Last post by mikea96
Who is online
Users browsing this forum: No registered users and 15 guests