WHAT Is Wanted?

Moderator: toyranosaur

User avatar
toyranosaur
Business Member
Posts: 233
Joined: Thu Jul 03, 2008 8:50 am
Location: USA
Been thanked: 1 time

WHAT Is Wanted?

Post by toyranosaur »

MmmKay, so! I knew it would happen eventually, I'm gettin' stretched for part ideas. Ergo and to wit, I'll be looking for sompin' you chaps have long wanted but not seen!

When I did the jellybean wheels, it got all crazy: It was obvious that there were 2,413 different front/rear/drive/offset combos wanted for specific cars through the years, and that just ain't not possible for me to do! So I'm lookin' for some consistency with less variables. Speak up, and chat amongst yourselves- It could lead to a nice product soon if it meets my basic criteria!

It don't even gotta be an RC10 part- Anything goes! Cheers All, Chris REC

User avatar
RC104ever
Approved Member
Posts: 1506
Joined: Sun May 22, 2011 11:34 am
Location: Burlington, Ontario - Canada
Been thanked: 8 times

Re: WHAT Is Wanted?

Post by RC104ever »

Off the top of my head:

1. Something for the Hotshot. Maybe shocks, wheels, or an undertray and battery holder (like the Supershot)
2. Maybe a polished RC10 chassis
3. RC10 alloy shock towers
4. Sand Scorcher Independent Rear Suspension setup (I know there is one out there but you'd probably make it better!)
5. Sand Scorcher shocks that are better than stock
6. Alloy Brush guard for the Sand Scorcher and RC10T
7. Alloy gear covers for RC10
- Chris
Lots of cars...so many cars

User avatar
Westcoast10z
Approved Member
Posts: 95
Joined: Mon Oct 11, 2010 10:13 pm
Location: Ames IA, USA
Has thanked: 4 times
Been thanked: 12 times

Re: WHAT Is Wanted?

Post by Westcoast10z »

These, but aluminum. Would buy, yes. As a set with boxart spring clamps, double yes.
Aplolgies to Bigjeepz who I think took the pic.
images.jpg
images.jpg (9.26 KiB) Viewed 3265 times
images.jpg
images.jpg (9.26 KiB) Viewed 3265 times
I have a Novak problem....

User avatar
shodog
Approved Member
Posts: 3817
Joined: Thu Oct 05, 2006 3:09 pm
Location: Washington
Has thanked: 3 times
Been thanked: 85 times

Re: WHAT Is Wanted?

Post by shodog »

I'd go with a rerelease of some of your proven sellers. With the release of the rc4wd blazer body there could be a demand for your warn and Chevy 8 bolt nuts

Image

I Especially want you make the the Classic unflanged

Image

I wish you would rere parts from your scorcher baja kits like the chassis, motor and gear covers along with the trim bits.

Image

Image

Image

Image

Image

Image

As for something new I'd like to see more SRB parts. Air filters, Oil cooler and remote oil filter mount

Image

Image

Image

Image

User avatar
Supernaut
Approved Member
Posts: 129
Joined: Tue Nov 05, 2013 5:30 pm
Location: Algonac, MI
Has thanked: 5 times
Been thanked: 66 times

Re: WHAT Is Wanted?

Post by Supernaut »

Tamiya Egress parts would be cool....
Love to build......need to practice painting
Associated - Worlds, B6D
Traxxas - Rad2, TCP, Stampede, Villain IV
Tamiya - CLODBUSTER
As you can see....I sold most of my cars. Funding Pinball now.

User avatar
limestang
Approved Member
Posts: 886
Joined: Tue Sep 27, 2011 9:48 am
Location: Fort Worth, TX
Has thanked: 11 times
Been thanked: 145 times

Re: WHAT Is Wanted?

Post by limestang »

Id love to see a cool motor display stand.

Also another custom gear cover like the tamiya one but for rc10.
Attachments
image.jpg
image.jpg (10.65 KiB) Viewed 3247 times
image.jpg
image.jpg (10.65 KiB) Viewed 3247 times

User avatar
RC104ever
Approved Member
Posts: 1506
Joined: Sun May 22, 2011 11:34 am
Location: Burlington, Ontario - Canada
Been thanked: 8 times

Re: WHAT Is Wanted?

Post by RC104ever »

What about a nice SRB alloy motor?
- Chris
Lots of cars...so many cars

Bong024
Approved Member
Posts: 110
Joined: Sat Nov 23, 2013 9:21 pm
Location: Palm Bay, florida

Re: WHAT Is Wanted?

Post by Bong024 »

limestang wrote:Id love to see a cool motor display stand.

Also another custom gear cover like the tamiya one but for rc10.

A gear cover would be cool, I've never seen that one done.
I'm not like them, but I can pretend...

User avatar
dsmith
Approved Member
Posts: 302
Joined: Sun Oct 18, 2009 10:27 am
Location: north indiana
Been thanked: 2 times

Re: WHAT Is Wanted?

Post by dsmith »

something similar to these ...aluminum?..i def would buy a set...everybody and their brother would want these for their sc10,ect...
f11.jpg
f11.jpg (22.25 KiB) Viewed 3160 times
f11.jpg
f11.jpg (22.25 KiB) Viewed 3160 times

User avatar
shodog
Approved Member
Posts: 3817
Joined: Thu Oct 05, 2006 3:09 pm
Location: Washington
Has thanked: 3 times
Been thanked: 85 times

Re: WHAT Is Wanted?

Post by shodog »

dsmith wrote:something similar to these ...aluminum?..i def would buy a set...everybody and their brother would want these for their sc10,ect...
f11.jpg
I'm not so sure. these have been on closeout at RC4wd for years http://store.rc4wd.com/Outlaw-Associated-SC10-Billet-Alum-Wheels_p_890.html

Image

User avatar
dsmith
Approved Member
Posts: 302
Joined: Sun Oct 18, 2009 10:27 am
Location: north indiana
Been thanked: 2 times

Re: WHAT Is Wanted?

Post by dsmith »

shodog wrote:
dsmith wrote:something similar to these ...aluminum?..i def would buy a set...everybody and their brother would want these for their sc10,ect...
f11.jpg
I'm not so sure. these have been on closeout at RC4wd for years http://store.rc4wd.com/Outlaw-Associated-SC10-Billet-Alum-Wheels_p_890.html

Image
yeah...but....those are bearing and pin..no one uses them anymore....these are 12mm hex.....plus...those are lame lookin....but..your prob right....some Subaru brat or scorcher stuff is always cool....

User avatar
toyranosaur
Business Member
Posts: 233
Joined: Thu Jul 03, 2008 8:50 am
Location: USA
Been thanked: 1 time

Re: WHAT Is Wanted?

Post by toyranosaur »

Hey! I'm gettin' some good idears from you chaps! :D Westcoast10z, I need to know what those are & what car they're for, then I'll see. Shodog, I get the idea you want flageless nuts! :shock: (I did kinda burn ya cancelling Nutpocalypse 2016. :oops: ) Funny, I been checking out an SRB oil cooler for a long time: Hmmmm?

Fill me in Gents, what RC10 Alloy towers are wanted? Pics & part #'s would also hep' me out there. The RC10 gear cover looks interesting! You want it 'peek-A-Boo' like the SS cover Shodog showed or solid/engraved?

I'd really think about SC10 Alloy wheels, so ther are NONE out there now that use the hex? I'm stuck in my little hole here & don't really know what's not out there that should be- Hence the clever title of this thread. Keep it comin' Mates,. the louder you are (And the more info/bckground/pics you submit to lessen my Googling stuff all day) the better chance of stuff getting done! Diggin' it!

Honestly, the Jellybean RC10 wheels I did were my all-time highest-grossing product in 1 single run, so I came here to ask. Chris REC

User avatar
Westcoast10z
Approved Member
Posts: 95
Joined: Mon Oct 11, 2010 10:13 pm
Location: Ames IA, USA
Has thanked: 4 times
Been thanked: 12 times

Re: WHAT Is Wanted?

Post by Westcoast10z »

Those are for RC10 (photo credit Slotcarrod)
rc10springthing.jpg
I have a Novak problem....

User avatar
limestang
Approved Member
Posts: 886
Joined: Tue Sep 27, 2011 9:48 am
Location: Fort Worth, TX
Has thanked: 11 times
Been thanked: 145 times

Re: WHAT Is Wanted?

Post by limestang »

Chris, I vote for the see thru rc10 gear cover. Your tamiya one is my all time favorite, but I didnt know about you when you produced it. So looking forward to one I can get:)

Thanks Mark/Limestang

toyranosaur wrote:Hey! I'm gettin' some good idears from you chaps! :D Westcoast10z, I need to know what those are & what car they're for, then I'll see. Shodog, I get the idea you want flageless nuts! :shock: (I did kinda burn ya cancelling Nutpocalypse 2016. :oops: ) Funny, I been checking out an SRB oil cooler for a long time: Hmmmm?

Fill me in Gents, what RC10 Alloy towers are wanted? Pics & part #'s would also hep' me out there. The RC10 gear cover looks interesting! You want it 'peek-A-Boo' like the SS cover Shodog showed or solid/engraved?

I'd really think about SC10 Alloy wheels, so ther are NONE out there now that use the hex? I'm stuck in my little hole here & don't really know what's not out there that should be- Hence the clever title of this thread. Keep it comin' Mates,. the louder you are (And the more info/bckground/pics you submit to lessen my Googling stuff all day) the better chance of stuff getting done! Diggin' it!

Honestly, the Jellybean RC10 wheels I did were my all-time highest-grossing product in 1 single run, so I came here to ask. Chris REC

User avatar
toyranosaur
Business Member
Posts: 233
Joined: Thu Jul 03, 2008 8:50 am
Location: USA
Been thanked: 1 time

Re: WHAT Is Wanted?

Post by toyranosaur »

Ah! Thanks Westcoast! Those do make sense, any shock that lets the spring move about is not good. If you mean the regular white shock clamps, sure, thos are doable. I've never liked most alloy clamps as they don't use a small enough radius to transition from the body to the flanges, which makes 'em look clunky & heavy- I'd fix that were I to do some. Gents? Opinions?

Stang, I've always really liked the see-through covers too- Lets you put extra stickers on your spur for more coolness. 8) These would both be fun projects, but they gotta turn a profit also-This means a few at a high price or more for cheaper, so afte this thread has run a small while, I'll post with a voting thing or such to choose the bestest part(s), fair enough? Speak up gents! I know this is a tester thread, but if it's allowed to put it where more chaps could see it within the decorum of the forum (I'm a poet!) that would make a bug difference. Admins, any thoughts? Chris REC

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post
  • just wanted to say hello
    by johnboy91 » » in RC10Talk Welcome Center
    3 Replies
    853 Views
    Last post by ChisaiKuso
  • rc10 wanted
    by rc-10 gold pan » » in RC10 Buggy Forum
    3 Replies
    780 Views
    Last post by templeofspeed
  • Dug out an old RC and wanted to say hi
    by sjones0812 » » in RC10Talk Welcome Center
    2 Replies
    185 Views
    Last post by JosephS
  • The RC10 I've Always Wanted
    by Basher67 » » in RC10 Buggy Forum
    14 Replies
    2898 Views
    Last post by shodog
  • just something I wanted to rant about...
    by PBR Allstar » » in Off-Topic / Chit-Chat
    29 Replies
    2558 Views
    Last post by seth556
  • One of those things I've always wanted to do
    by mrlexan » » in Off-Topic / Chit-Chat
    73 Replies
    5092 Views
    Last post by mrlexan
  • The one i always wanted as a kid
    by jeroen206 » » in Tamiya Forum
    2 Replies
    783 Views
    Last post by slotcarrod
  • Airbrush and compressor help wanted
    by vwjuice » » in The Paint / Body Shop
    23 Replies
    2875 Views
    Last post by Johnboy72

Return to “Rogue Element Components”

Who is online

Users browsing this forum: No registered users and 7 guests