Mat's World's ReRe - Build #2 - RaceReady

Moderator: scr8p

User avatar
lmw94002
Approved Member
Posts: 360
Joined: Mon Nov 28, 2016 3:43 pm
Location: Boston, MA, USA

Mat's World's ReRe - Build #2 - RaceReady

Post by lmw94002 » Tue May 02, 2017 1:15 pm

Just starting a thread for my 2nd Worlds ReRe build that will be for racing. Going to start with making the parts list. Some of which I've already started acquiring.

Edited 2017/05/31
  • SSC10 Chassis Kit & Motor Guard
  • Dyed all "white" parts Black (RIT Dyemore Graphite)
  • Lunsford Punisher Titanium Turnbuckles
  • Lunsford Titnanium Hnge Pins
  • TeamBlueGroove Undertray
  • Boca Green Seal Bearings
  • RPM Heavy Duty Rod Ends
  • All Stainless Steel Hardware
  • Xerun JustStock 17.5 Brushless ESC/Motor Combo
  • Radio Control Customs G10 Fiberglass Shock towers
  • Associated White Wheels dyed Black
  • Proline Racing Dirt Hawg III (front) and Dirt Hawg I (rear) Tires
Tires will probably be swapped for more appropriate tires for the track when the times comes...

Definitely open to suggestions, ideas, etc.
Last edited by lmw94002 on Wed May 31, 2017 6:02 pm, edited 7 times in total.
--
RC10CE 6-gear, RC10 Team, 10L, 10LSS, Worlds, B2, B4 TC, FT TC3, Nitro SC8, SC18, RC18LM, FT SC10.2, Worlds-ReRe, B6, B6D
--Builds--
SSC10 build - viewtopic.php?f=88&t=41740

User avatar
NomadRacer
Approved Member
Posts: 577
Joined: Sun Apr 16, 2017 11:29 am
Location: Eastern Shore of Virginia

Re: Mat's World's ReRe - Build #2 - RaceReady

Post by NomadRacer » Wed May 03, 2017 11:35 am

I've had my eye on the SSC10 Chassis Kit for awhile so will be watching what you do.
Bum on Direct Deposit

User avatar
lmw94002
Approved Member
Posts: 360
Joined: Mon Nov 28, 2016 3:43 pm
Location: Boston, MA, USA

Re: Mat's World's ReRe - Build #2 - RaceReady

Post by lmw94002 » Wed May 03, 2017 1:26 pm

NomadRacer wrote:
Wed May 03, 2017 11:35 am
I've had my eye on the SSC10 Chassis Kit for awhile so will be watching what you do.
I have a couple... the chassis feels nice and solid. Once I finish my box-stock build. I want to get going on this to hopefully make it out to the track in a few weeks.
--
RC10CE 6-gear, RC10 Team, 10L, 10LSS, Worlds, B2, B4 TC, FT TC3, Nitro SC8, SC18, RC18LM, FT SC10.2, Worlds-ReRe, B6, B6D
--Builds--
SSC10 build - viewtopic.php?f=88&t=41740

User avatar
RCveteran
Approved Member
Posts: 1233
Joined: Sat Jul 10, 2010 10:48 pm
Location: Chicago

Re: Mat's World's ReRe - Build #2 - RaceReady

Post by RCveteran » Wed May 03, 2017 2:08 pm

Wow, first I have heard of this SSC10 chassis? How do I get one?

User avatar
lmw94002
Approved Member
Posts: 360
Joined: Mon Nov 28, 2016 3:43 pm
Location: Boston, MA, USA

Re: Mat's World's ReRe - Build #2 - RaceReady

Post by lmw94002 » Wed May 03, 2017 2:19 pm

RCveteran wrote:
Wed May 03, 2017 2:08 pm
Wow, first I have heard of this SSC10 chassis? How do I get one?
I got mine from Chad, aka "fitsquad" on Ebay... http://www.ebay.com/usr/fitsquad

Or there's a FB page... https://www.facebook.com/groups/357379891328587/
and https://www.facebook.com/SSCLCG/

If you're in a real pinch and wanted it bad... I'd sell you one of my extra kits.
--
RC10CE 6-gear, RC10 Team, 10L, 10LSS, Worlds, B2, B4 TC, FT TC3, Nitro SC8, SC18, RC18LM, FT SC10.2, Worlds-ReRe, B6, B6D
--Builds--
SSC10 build - viewtopic.php?f=88&t=41740

User avatar
lmw94002
Approved Member
Posts: 360
Joined: Mon Nov 28, 2016 3:43 pm
Location: Boston, MA, USA

Re: Mat's World's ReRe - Build #2 - RaceReady

Post by lmw94002 » Tue May 16, 2017 11:58 am

First step done... RIT Dyemore Graphite came out pretty nice. We all know black is the fastest color.
dyemore_graphite.jpg
--
RC10CE 6-gear, RC10 Team, 10L, 10LSS, Worlds, B2, B4 TC, FT TC3, Nitro SC8, SC18, RC18LM, FT SC10.2, Worlds-ReRe, B6, B6D
--Builds--
SSC10 build - viewtopic.php?f=88&t=41740

User avatar
NomadRacer
Approved Member
Posts: 577
Joined: Sun Apr 16, 2017 11:29 am
Location: Eastern Shore of Virginia

Re: Mat's World's ReRe - Build #2 - RaceReady

Post by NomadRacer » Tue May 16, 2017 12:06 pm

Outstanding! I've subscribed to your build in order to watch how the SSC10 chassis goes together.
Bum on Direct Deposit

User avatar
lmw94002
Approved Member
Posts: 360
Joined: Mon Nov 28, 2016 3:43 pm
Location: Boston, MA, USA

Re: Mat's World's ReRe - Build #2 - RaceReady

Post by lmw94002 » Tue May 16, 2017 12:10 pm

I'm debating if I want to order one of his fabricated motor guards or do what the original SSC10 builds did, aka chop the tail off a chassis.

I do have a good donor chassis that has a straight tail but is otherwise hacked and scuffed to be otherwise useless.
--
RC10CE 6-gear, RC10 Team, 10L, 10LSS, Worlds, B2, B4 TC, FT TC3, Nitro SC8, SC18, RC18LM, FT SC10.2, Worlds-ReRe, B6, B6D
--Builds--
SSC10 build - viewtopic.php?f=88&t=41740

User avatar
Lonestar
Approved Member
Posts: 3782
Joined: Wed Dec 12, 2007 10:17 am
Location: Switzerland, yannow, in Europe (or almost)

Re: Mat's World's ReRe - Build #2 - RaceReady

Post by Lonestar » Tue May 16, 2017 12:58 pm

Thanks for pointing out the very existence of the SSC10 chassis... which I didn't know about either. This looks pretty darn awesome...

The fun bit is, I initially read "SC10" and I was thinking "wtf, man..." :mrgreen:

Subscribed to your build 8)
AE RC10 - Made In The Eighties, Loved By The Ladies.

User avatar
NomadRacer
Approved Member
Posts: 577
Joined: Sun Apr 16, 2017 11:29 am
Location: Eastern Shore of Virginia

Re: Mat's World's ReRe - Build #2 - RaceReady

Post by NomadRacer » Tue May 16, 2017 1:24 pm

lmw94002 wrote:
Tue May 16, 2017 12:10 pm
I'm debating if I want to order one of his fabricated motor guards or do what the original SSC10 builds did, aka chop the tail off a chassis.

I do have a good donor chassis that has a straight tail but is otherwise hacked and scuffed to be otherwise useless.
If the "donor" chassis is of no value other than the tail section you need, dremel on!
Bum on Direct Deposit

User avatar
lmw94002
Approved Member
Posts: 360
Joined: Mon Nov 28, 2016 3:43 pm
Location: Boston, MA, USA

Re: Mat's World's ReRe - Build #2 - RaceReady

Post by lmw94002 » Thu May 18, 2017 12:31 pm

I ended going with Boca Green Seal Bearings. I was eyeing ceramic but the cost is pretty high. We'll see how these go. :)

I do have to give a special thanks to Boca, because I pointed out their "World's" bearing kit was for the original, not the ReRe. After chatting with them, they gave me such a great deal I got 3 complete bearing sets for less than the cost of most ceramic kits.

"RC Car & Truck Green Seal Bearing kits have been an industry standard for many years and are specially designed for off-road or excessively dirty driving environments. These ABEC #1 bearings are maintenance free and lubed for the life of the bearing. The heavy duty rubber seal provides extra protection against the harshest elements."
--
RC10CE 6-gear, RC10 Team, 10L, 10LSS, Worlds, B2, B4 TC, FT TC3, Nitro SC8, SC18, RC18LM, FT SC10.2, Worlds-ReRe, B6, B6D
--Builds--
SSC10 build - viewtopic.php?f=88&t=41740

User avatar
NomadRacer
Approved Member
Posts: 577
Joined: Sun Apr 16, 2017 11:29 am
Location: Eastern Shore of Virginia

Re: Mat's World's ReRe - Build #2 - RaceReady

Post by NomadRacer » Thu May 18, 2017 12:39 pm

I have been buying Acer bearings for awhile, think I'll switch to Boca in the future.
Bum on Direct Deposit

User avatar
lmw94002
Approved Member
Posts: 360
Joined: Mon Nov 28, 2016 3:43 pm
Location: Boston, MA, USA

Re: Mat's World's ReRe - Build #2 - RaceReady

Post by lmw94002 » Thu May 18, 2017 12:53 pm

I was torn... I almost bought an Avid kit because you can customize what type of bearing for each size. The Boca rep was so helpful and the discount was just too good to say no too. We'll see how they spin...
--
RC10CE 6-gear, RC10 Team, 10L, 10LSS, Worlds, B2, B4 TC, FT TC3, Nitro SC8, SC18, RC18LM, FT SC10.2, Worlds-ReRe, B6, B6D
--Builds--
SSC10 build - viewtopic.php?f=88&t=41740

User avatar
lmw94002
Approved Member
Posts: 360
Joined: Mon Nov 28, 2016 3:43 pm
Location: Boston, MA, USA

Re: Mat's World's ReRe - Build #2 - RaceReady

Post by lmw94002 » Fri May 19, 2017 5:25 pm

Broke down and ordered an SSC rear motor guard. Too lazy of late to hack off the tail of a chassis and have to clean it up, drill it, etc. I want to build! LOL. Crossing my fingers the bearings show up today/tomorrow so I can really get started this weekend. :)
--
RC10CE 6-gear, RC10 Team, 10L, 10LSS, Worlds, B2, B4 TC, FT TC3, Nitro SC8, SC18, RC18LM, FT SC10.2, Worlds-ReRe, B6, B6D
--Builds--
SSC10 build - viewtopic.php?f=88&t=41740

User avatar
NomadRacer
Approved Member
Posts: 577
Joined: Sun Apr 16, 2017 11:29 am
Location: Eastern Shore of Virginia

Re: Mat's World's ReRe - Build #2 - RaceReady

Post by NomadRacer » Fri May 19, 2017 6:16 pm

Cool. I'll be watching for the pics!
Bum on Direct Deposit

Post Reply

Return to “RC10 Re-Release Forum”

Users browsing this forum: No registered users and 1 guest