RC10Talk - The Net's Largest Vintage R/C Community

The B1M bolt-in conversion kits are now available!

For the development of the kit please see here http://www.rc10talk.com/viewtopic.php?f=35&t=40247

Instructions for building the kit and parts list can be seen here http://www.rc10talk.com/viewtopic.php?f=103&t=42301

Here's a youtube video on the kit


Here's an earlier video introducing the concept with an early prototype


And here are the components

B1M Transmission case (Deluxe and Basic kits) B1M bulkhead (note production version has two sets of camber link holes), (Deluxe and Basic kits) B1M graphite bulkhead (option for graphite cars) B1M motor plate spacers (Deluxe and Basic kits) B1M rear chassis brace (Deluxe kits only) B1M body mount (Deluxe kits only) B1M rear shock tower (also available in black), (Deluxe and Basic kits) Optional carbon fiber shock tower (adds $7 to listed kit prices) Motor Plate (Deluxe and Basic kits) B1M and CPD sticker sheet Complete deluxe kit (both tower colors shown, you need to choose one or the other) The Deluxe kit is $130 ($137 with optional carbon fiber tower)+ shipping
Deluxe Kit:
Trans case
idler gear and bearings
bulkhead (specify regular or graphite chassis version)
Tower (choose natural, black, or carbon fiber upgrade)
Motor Plate
Motor Plate spacers
Rear Chassis brace
Rear Chassis Brace tubes
Body and Wing tube mount
B1M/CPD sticker sheet

The Basic kit is $100 ($107 with optional carbon fiber tower) + shipping.
Basic Kit:
Trans case
idler gear and bearings
bulkhead (specify regular or graphite chassis version)
Tower (choose natural, black, or carbon fiber upgrade)
Motor Plate
Motor Plate spacers
B1M/CPD sticker sheet

Shipping in the US will be USPS Priority insured at $10.50

To buy a kit please PM me on here or email me at [email protected] (remove the dashes). Please let me know what country you are in if not in the US so I can quote your shipping charges.

For those that want to piece their own kit together themselves, I'll make the parts available in the coming days on ShapeWays.

For those of you that want to build one, here ya go!

In Sir! PM sent

Right back at'cha

mk-Zero wrote: ↑Fri Nov 10, 2017 3:42 pm Right back at'cha

Cha ching!

PM sent thanks

My bits arrived today , thanks Brian
Now to start the build

Globe7388 wrote: ↑Tue Nov 28, 2017 6:31 am My bits arrived today , thanks Brian
Now to start the build

I'm having a great time building mine! http://www.rc10talk.com/viewtopic.php?f=35&t=42395

Globe7388 wrote: ↑Tue Nov 28, 2017 6:31 am My bits arrived today , thanks Brian
Now to start the build

Glad to hear!
Make sure you check the instruction thread HERE if you haven't already, and for sure check out Nomad's excellent build thread. Enjoy the build!

Nice work Brian. Turned out awesome!

Thanks Derrick! The motor plates look awesome!

mk-Zero wrote: ↑Tue Nov 28, 2017 11:04 am

Globe7388 wrote: ↑Tue Nov 28, 2017 6:31 am My bits arrived today , thanks Brian
Now to start the build

Glad to hear!
Make sure you check the instruction thread HERE if you haven't already, and for sure check out Nomad's excellent build thread. Enjoy the build!

Yes been following the build thread , almost finished rear end , not completely sold on the colour!

Glad the build is going well. Interesting color combo!

Yellow is the bomb. It will look better as you keep adding parts

YELLOW JACKET

I'm digging the yellow and black theme!