Works 91 runner

The place for all things Yokomo.

Moderators: scr8p, klavy69

User avatar
olfrjf
Approved Member
Posts: 56
Joined: Tue Dec 08, 2015 4:18 am
Location: France
Been thanked: 2 times

Re: Works 91 runner

Post by olfrjf »

and , you have some pics too? because we haven't seen anyting :shock: :lol: :mrgreen:

User avatar
Mr. ED
Approved Member
Posts: 5475
Joined: Thu Dec 21, 2006 1:30 am
Location: Back @ home: Belgium
Has thanked: 58 times
Been thanked: 56 times

Re: Works 91 runner

Post by Mr. ED »

http://www.rc10talk.com/viewtopic.php?f=6&t=42427
If you want tokeep your original arms spotless, click the link above.
Front c-hubs and steering knuckles can be substituted by their academy wyvern counterparts; I have plenty nib.

eugine
Approved Member
Posts: 56
Joined: Mon Dec 19, 2016 4:12 am
Location: France

Re: Works 91 runner

Post by eugine »

olfrjf wrote: Sat Dec 16, 2017 8:53 am and , you have some pics too? because we haven't seen anyting :shock: :lol: :mrgreen:
:lol: You are right.

Here it is ;)
I bought it clean.

http://www.hostingpics.net/viewer.php?id=608598P1060407.jpg

eugine
Approved Member
Posts: 56
Joined: Mon Dec 19, 2016 4:12 am
Location: France

Re: Works 91 runner

Post by eugine »

Mr. ED wrote: Sat Dec 16, 2017 8:40 am
eugine wrote: Fri Dec 15, 2017 12:49 pm Hi that's obvious if I break it I will fix it.
But I need to know if there are any parts that are very rare to find and with a big chance of breaking them.
What I meant was: this was a competition level car in its days. If you don't go crazy and drive halfway descent you shouldn't have to worry about breaking stuff.
Hi Mr ED
This is exactly wath I would like to do

eugine
Approved Member
Posts: 56
Joined: Mon Dec 19, 2016 4:12 am
Location: France

Re: Works 91 runner

Post by eugine »

Mr. ED wrote: Sat Dec 16, 2017 12:27 pm http://www.rc10talk.com/viewtopic.php?f=6&t=42427
If you want tokeep your original arms spotless, click the link above.
Front c-hubs and steering knuckles can be substituted by their academy wyvern counterparts; I have plenty nib.
I have weared A arms that i can install.

I don't have the rights to open your link but I note that I will need c-hubs and steering knuckles

eugine
Approved Member
Posts: 56
Joined: Mon Dec 19, 2016 4:12 am
Location: France

Re: Works 91 runner

Post by eugine »

DennisM wrote: Sat Dec 16, 2017 4:04 am Use a YR4 front bulkhead in plastic and drive like You stole it :-)
works92 wrote: Sat Dec 16, 2017 5:14 am If you find and put a plastic/delrin front bulkhead then you can try to find Drescher front arms, they're bulletproof.
but you have to change c-hubs
at this point you can also upgrade to RPM or alu steering hubs
Thank you guys

I will find these front parts and go for a trial ;)

eugine
Approved Member
Posts: 56
Joined: Mon Dec 19, 2016 4:12 am
Location: France

Re: Works 91 runner

Post by eugine »

Any advise for the tranny ?

User avatar
olfrjf
Approved Member
Posts: 56
Joined: Tue Dec 08, 2015 4:18 am
Location: France
Been thanked: 2 times

Re: Works 91 runner

Post by olfrjf »

eugine wrote: Sun Dec 17, 2017 2:20 pm
olfrjf wrote: Sat Dec 16, 2017 8:53 am and , you have some pics too? because we haven't seen anyting :shock: :lol: :mrgreen:
:lol: You are right.

Here it is ;)
I bought it clean.

http://www.hostingpics.net/viewer.php?id=608598P1060407.jpg

That's all? seriousely? some more please? :lol:

User avatar
Mr. ED
Approved Member
Posts: 5475
Joined: Thu Dec 21, 2006 1:30 am
Location: Back @ home: Belgium
Has thanked: 58 times
Been thanked: 56 times

Re: Works 91 runner

Post by Mr. ED »

eugine wrote: Sun Dec 17, 2017 2:33 pm Any advise for the tranny ?
Spare belts. When I ran my hotdog the belt snapped: probably too much tension when the chassis flexed.
A spare spur is always a good idea also.

Peakey
Approved Member
Posts: 578
Joined: Tue Feb 25, 2014 3:55 am
Location: Nottingham, UK
Been thanked: 3 times

Re: Works 91 runner

Post by Peakey »

We need more pics than that! :lol: if it is a91 then the rear hub carriers were weak and cracked very easily so try and find some later ones all will fit from the 92 on.
Again if it is a 91 the. The fine pitch belts might be a problem, you need to keep the tensioner right if it’s not then you’ll strip both belts in a couple of laps.

eugine
Approved Member
Posts: 56
Joined: Mon Dec 19, 2016 4:12 am
Location: France

Re: Works 91 runner

Post by eugine »

Peakey wrote: Sun Mar 18, 2018 9:33 am We need more pics than that! :lol: if it is a91 then the rear hub carriers were weak and cracked very easily so try and find some later ones all will fit from the 92 on.
Again if it is a 91 the. The fine pitch belts might be a problem, you need to keep the tensioner right if it’s not then you’ll strip both belts in a couple of laps.
Hi Peakey

This is all I have. I hope it is enough for you :)
Thanks for the advice.

Image
Image
Image
Image

Peakey
Approved Member
Posts: 578
Joined: Tue Feb 25, 2014 3:55 am
Location: Nottingham, UK
Been thanked: 3 times

Re: Works 91 runner

Post by Peakey »

Yep definitely a 91, like I said if you can hunt the other bits out it might help you. Also if you convert it to the 92 drive train you can add a slipper if you can find one of those that is.

eugine
Approved Member
Posts: 56
Joined: Mon Dec 19, 2016 4:12 am
Location: France

Re: Works 91 runner

Post by eugine »

OK thanks

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post
  • Yokomo Works runner
    by Alex B » » in Yokomo Forum
    9 Replies
    1043 Views
    Last post by Alex B
  • Cougar 2 works runner
    by Retro rc » » in Schumacher Forum
    11 Replies
    1681 Views
    Last post by Lavigna
  • mr4-bc or works 93 runner?
    by ericsp2 » » in Yokomo Forum
    29 Replies
    2425 Views
    Last post by ericsp2
  • My Works 93 Runner Project. Should be fun!! ;)
    by RETRO R/C » » in Yokomo Forum
    39 Replies
    3938 Views
    Last post by RETRO R/C
  • Skunk Works Or Junk Works?
    by FasterLouder » » in Yokomo Forum
    6 Replies
    891 Views
    Last post by NRG
  • My latest runner. Optima Mid Custom. ( Runner Pics added)
    by Mad Racer » » in Kyosho Forum
    7 Replies
    1132 Views
    Last post by Mad Racer
  • Works 91
    by Synergy » » in Yokomo Forum
    6 Replies
    1949 Views
    Last post by Synergy
  • ´93 Works
    by DennisM » » in Yokomo Forum
    5 Replies
    1200 Views
    Last post by Peakey

Return to “Yokomo Forum”

Who is online

Users browsing this forum: No registered users and 22 guests