Page 9 of 10
Re: Factory Works C2 Carbon Fiber
Posted: Tue May 08, 2018 4:57 pm
by Asso_man!
Nice! Did you machine a space inside the wing mount posts to accommodate o-rings like the Yokomo design? It would sandwich the wing with the disks of the wing mounts, help tightening and dampening the wing in case of a shock.
Re: Factory Works C2 Carbon Fiber
Posted: Tue May 08, 2018 5:52 pm
by NomadRacer
Yes, space for an Associated red shock o-ring.
It will be done better next time, ordered an end mill bit.
Re: Factory Works C2 Carbon Fiber
Posted: Wed May 09, 2018 11:20 am
by NomadRacer
The basic tools to make a pair of nose brace tubes.
Bender
Tubing cutter
Thick wall 3/16" tubing
I'm making one custom tool today.
Re: Factory Works C2 Carbon Fiber
Posted: Wed May 09, 2018 2:42 pm
by NomadRacer
I've bent and cut both tubes to match, well, almost! The right side is about +1mm so have to adjust it with some fine file work from both ends. I'm using Factory Works, black socket head cap screw (4-40 sized) load spread washers on the ends. Besides looking cool, they will do what they are designed to do, spread the load. I believe, this will be beneficial for the nose plate brace tubes.
Re: Factory Works C2 Carbon Fiber
Posted: Wed May 09, 2018 4:06 pm
by XLR8
That's such a simple and elegant way to brace the nose plate. I can't think of a better way. Well done! Looks fantastic!!
Re: Factory Works C2 Carbon Fiber
Posted: Wed May 09, 2018 4:34 pm
by NomadRacer
Thanks man. Working on that 2nd one, pics of the finished work tomorrow.
Re: Factory Works C2 Carbon Fiber
Posted: Thu May 10, 2018 8:12 am
by NomadRacer
I worked deep into the night to finish up the nose plate brace tubes. I'm real happy with them, turned out perfectly.
Click image for full size
Re: Factory Works C2 Carbon Fiber
Posted: Thu May 10, 2018 9:34 am
by XLR8
HEY, it's a roller. It won't be long now. Everything looks really good and I like those wheels. Electronics and body/wing paint next?
Re: Factory Works C2 Carbon Fiber
Posted: Thu May 10, 2018 10:03 am
by NomadRacer
Yep, electronics and wing work!
This is the "tool" I made and used on the brace tube ends. It has double set screws to secure it to the brace tube, allowing me to square the ends and take off a bit of material to fine tune lengths as needed.
Re: Factory Works C2 Carbon Fiber
Posted: Sun May 13, 2018 1:06 pm
by NomadRacer
While I'm working on the rear wing, (camera is on charge) I starting sorting out the electronics. I'll use a Hobby Wing XR10 Justock. First thing, I remove the Yellow/Blue/Orange wires along with the black and red. New, out the box these wires are soldered to the posts "standing up". I used TQ Wire 13awg for the motor and some Novak Super Flex for the battery wires. I soldered the wires "laying flat". This will give me a cleaner look in the end. I've not soldered the cap back on yet, need to see where it will mount and if I can shorten the wires.
Once my camera is charged I'll come back and show you a cool "trick" that I came up with on the wing wire attachment.
Re: Factory Works C2 Carbon Fiber
Posted: Sun May 13, 2018 9:39 pm
by XLR8
Okay, been waiting 8 1/2 hours now. How long does it take to charge a camera battery?
Re: Factory Works C2 Carbon Fiber
Posted: Mon May 14, 2018 7:33 am
by NomadRacer
OK!
All those familiar with the Factory Works shock tower wing mount know that 1/16" wire is a bit loose in the mount. It sort of distorts your carefully measured wing work by not tightening up even like. My fix was to silver solder a piece of 1/16" inside diameter brass tube on the ends. Now, it fits snugly in the aluminum mount. A bit anal retentive? Sure!
Re: Factory Works C2 Carbon Fiber
Posted: Mon May 14, 2018 8:03 am
by Lonestar
This all looks so ridiculously simple... but when one knows the amount of work behind a simple shelf-engineered product, this is totally outstanding
the attention to detail is mind-boggling as usual
Re: Factory Works C2 Carbon Fiber
Posted: Mon May 14, 2018 8:19 am
by RC10th
Lonestar wrote: ↑Mon May 14, 2018 8:03 am
the attention to detail is mind-boggling as usual
The wing button isn't squared up
Re: Factory Works C2 Carbon Fiber
Posted: Mon May 14, 2018 8:23 am
by Lonestar
RC10th wrote: ↑Mon May 14, 2018 8:19 am
Lonestar wrote: ↑Mon May 14, 2018 8:03 am
the attention to detail is mind-boggling as usual
The wing button isn't squared up
this kinda stuff definitely flies BELOW my radar screen