Re: rc-10 with an RC-10B3 transmisson.
Posted: Wed Aug 26, 2009 9:49 pm
I made some shims for the arm mounts.
Now I need to make an order for more parts.
ED
Now I need to make an order for more parts.
ED
RC10Talk - The Net's Largest Vintage R/C Community
RC-10 WOIN (without RC-10B3 transmisson)
Page 2 of 8
Re: rc-10 with an RC-10B3 transmisson.
Posted: Thu Aug 27, 2009 4:55 am
Is there a special reason why you did that? You would need to install even more shims on the front of the arm mounts in order to keep the rearforward caster angle.
Re: rc-10 with an RC-10B3 transmisson.
Posted: Thu Aug 27, 2009 5:01 am
couple posts back David: the outdrives are higher up than on the stealth transmission, which makes the bones squeeze in the cups and limits suspension travel.
I thought the shims were over the whole length of the mount, but after your comment and looking at the picture...it looks like the avise was not well understood.
Personally I would have gone for different axle carriers to bring the lower arms and bones more parallel
I thought the shims were over the whole length of the mount, but after your comment and looking at the picture...it looks like the avise was not well understood.
Personally I would have gone for different axle carriers to bring the lower arms and bones more parallel
Re: rc-10 with an RC-10B3 transmisson.
Posted: Thu Aug 27, 2009 5:28 am
The shim is the full length of the mount.
Re: rc-10 with an RC-10B3 transmisson.
Posted: Thu Aug 27, 2009 7:54 am
very well, just an optical illusion in the pic
Re: rc-10 with an RC-10B3 transmisson.
Posted: Thu Aug 27, 2009 7:55 am
I think I put the mount on the wrong side 
..
..Re: rc-10 with an RC-10B3 transmisson.
Posted: Thu Aug 27, 2009 8:08 am
yeah that's what I thought, but you looked so self-confident...soniccj5 wrote:I think I put the mount on the wrong side
Re: rc-10 with an RC-10B3 transmisson.
Posted: Thu Aug 27, 2009 12:18 pm
A wise man learns from his own mistakes, a wiser man learns from other peoples mistakes.
thankyou for the lesson
thankyou for the lesson
Re: rc-10 with an RC-10B3 transmisson.
Posted: Mon Sep 07, 2009 4:28 pm
Added some paint to my chassis today.
Re: rc-10 with an RC-10B3 transmisson.
Posted: Tue Sep 08, 2009 6:33 am
it's hammer time
Re: rc-10 with an RC-10B3 transmisson.
Posted: Thu Sep 10, 2009 11:38 am
Spent about 30 mins outside last night with the grill a loaf pan and rit dye. My yellow parts are now black 
.
It is almost time to assemble everything. I just need me tower order to come in.
. It is almost time to assemble everything. I just need me tower order to come in.
Re: rc-10 with an RC-10B3 transmisson.
Posted: Sun Sep 13, 2009 1:56 pm
Looking more like a car now.
Re: rc-10 with an RC-10B3 transmisson.
Posted: Thu Sep 17, 2009 12:25 pm
Just need to pickup some blue loctite tonight and I should be able to get it running. I wont have time to paint the new body, but I plan on running my original RC-10 body from back in the day 
Re: rc-10 with an RC-10B3 transmisson.
Posted: Sat Sep 19, 2009 1:54 pm
Well it is together and ready to run.
Got a new body waiting to be painted.
Got a new body waiting to be painted.
Re: rc-10 with an RC-10B3 transmisson.
Posted: Sat Sep 19, 2009 4:00 pm
ha, looks great, kind of mean; like the underdog that's gonna pale the local bullies