Page 2 of 2
Re: How To Help? Removal of Clay
Posted: Mon Sep 10, 2007 3:35 pm
by RC10Nut
Halgar wrote:One of the guys over at Clodtalk is a bike fanatic and recommends a citrus degreaser that he uses for cleaning bikes and parts, as well as rc's. The Citra-Solv sounds about right, but I'm not sure if that's what he uses or not.
I wash my graphite chassis with a cleaner called "Purple Power" or "Purple Passion". Most auto stores carry it. Very nice degreaser. I use it to wash my tires and engine's on my car and trucks. Simple Green I use every day for my hands (chimney soot) and so far no problems.

Re: How To Help? Removal of Clay
Posted: Mon Sep 10, 2007 10:26 pm
by olderacer
the right scrub brush makes a heck of a difference. on old dried out clay i've seen people use wire brushes! they actually got the clay off with wire brush and simple green and didn't do much more than scuff the tires. i used to race with some guys who wire brushed their tires to purposely scuff them. i've never done this since i keep tires washed after every race and sometimes after every run. but i do have different scrub brushes, some with some stout bristals for tough clay. i've been hesitant to use the wire brush- but i got one just in case!
Re: How To Help? Removal of Clay
Posted: Tue Sep 11, 2007 12:38 am
by badhoopty
i cant find castrol super clean anywhere anymore.
are you guys still finding it?
Re: How To Help? Removal of Clay
Posted: Tue Sep 11, 2007 9:03 am
by Eau Rouge
Jason, I have found it at AutoZone, but I bought my gallon at Meijers, too. I think I have seen it at Sam's Club and other places, as well. Just saw it on the shelf at another store the other day (I can't recall which—might have been Lowe's), so it's still out there.
Re: How To Help? Removal of Clay
Posted: Wed Sep 12, 2007 1:26 am
by badhoopty
Eau Rouge wrote:Jason, I have found it at AutoZone, but I bought my gallon at Meijers, too. I think I have seen it at Sam's Club and other places, as well. Just saw it on the shelf at another store the other day (I can't recall which—might have been Lowe's), so it's still out there.
right on, i was getting worried it was taken off the shelves.
Re: How To Help? Removal of Clay
Posted: Wed Sep 12, 2007 2:31 pm
by Tripp
Purple power is great but it does contain acid so be careful around anodized parts. Simple green is the best thing out there IMO for all around cleaning. I use it all my RC race stuff and my 1.1 truck for cleaning the wheels and tires. Plus at $9 bucks a gallon it's priced right.
Re: How To Help? Removal of Clay
Posted: Wed Sep 12, 2007 8:14 pm
by RC Chick
ive used simple green and purple power on lots of things and they both work great, I didn't have any of that around when I did my clean up, I used Dawn liquid soap and a scrub brush to clean my wheels. It worked pretty good. Of course if you looked at my pictures youd see they were dirty but I guess that's what happens when you play in the sand and dirt.
Re: How To Help? Removal of Clay
Posted: Wed Sep 12, 2007 8:19 pm
by scr8p
the best way to get clean tires is to buy new ones.

Re: How To Help? Removal of Clay
Posted: Wed Sep 12, 2007 8:31 pm
by Halgar
Re: How To Help? Removal of Clay
Posted: Wed Sep 12, 2007 8:33 pm
by mrlexan
sure, if you found a pot of gold at the end of the rainbow....... keep in mind the gold might be from the Atocha and at the bottom of the Ocean (ie. long discontinued).
Re: How To Help? Removal of Clay
Posted: Wed Sep 12, 2007 8:35 pm
by scr8p
hey, i never said it'd be cost effective.

Re: How To Help? Removal of Clay
Posted: Wed Sep 12, 2007 8:52 pm
by mrlexan
Re: How To Help? Removal of Clay
Posted: Wed Sep 12, 2007 9:21 pm
by scr8p
more overwhelmed than anything. too much going on lately, and only so much time to do it.
Re: How To Help? Removal of Clay
Posted: Thu Jan 31, 2008 8:47 am
by Brandon G
Go to the dollar store and get some "L.A.'s totally awesome". Very cheap, and smells and works just like simple green, only it's yellow.
Re: How To Help? Removal of Clay
Posted: Thu Jan 31, 2008 10:25 am
by Erich Reichert
depending where it is you can always just soak with water... clay will always soften with warm water.