Page 2 of 2
Re: E-clips keep popping off.
Posted: Mon Jun 18, 2018 2:32 pm
by jwscab
you need snap rings or e-clips for 1/8" shaft.
Re: E-clips keep popping off.
Posted: Mon Jun 18, 2018 5:22 pm
by Incredible_Serious
Lowgear wrote: ↑Sat Apr 14, 2012 5:48 pm
An alternative to e-clips are snap rings aka circlips which have been used and sold for R/C applications. Although I imagine they would catch on more things once the part that protrudes orientates itself towards the ground.
(Pic stolen from eBay)
snap rings.JPG
Those are a little odd as I'm not sure how they go on. Hopefully there's a slit where the square hole is.
Interestingly, even though this thread has been brought back to life after more than six years... I have a NIP set of these Parma bits in a lot I'm selling on eBay at the moment.....
Alex
Re: E-clips keep popping off.
Posted: Mon Jun 18, 2018 6:39 pm
by Lavigna
Incredible_Serious wrote: ↑Mon Jun 18, 2018 5:22 pm
Lowgear wrote: ↑Sat Apr 14, 2012 5:48 pm
An alternative to e-clips are snap rings aka circlips which have been used and sold for R/C applications. Although I imagine they would catch on more things once the part that protrudes orientates itself towards the ground.
(Pic stolen from eBay)
snap rings.JPG
Those are a little odd as I'm not sure how they go on. Hopefully there's a slit where the square hole is.
Interestingly, even though this thread has been brought back to life after more than six years... I have a NIP set of these Parma bits in a lot I'm selling on eBay at the moment.....
Alex
I think we messaged yesterday about them. Are your Parma units gold colored?
Re: E-clips keep popping off.
Posted: Mon Jun 18, 2018 7:29 pm
by Incredible_Serious
lavigna wrote: ↑Mon Jun 18, 2018 6:39 pm
I think we messaged yesterday about them. Are your Parma units gold colored?
Wouldn't be me, mate, I didn't get a message. Besides which, mine are in a lot with a large pile of other RC parts.... *cough* 253690634886 *cough*....
. Hard to tell what colour they are from the photo... can check tonight, if necessary...
Alex
Re: E-clips keep popping off.
Posted: Mon Jun 18, 2018 8:07 pm
by scr8p
Re: E-clips keep popping off.
Posted: Mon Jun 18, 2018 8:10 pm
by Incredible_Serious
Re: E-clips keep popping off.
Posted: Mon Jun 18, 2018 10:22 pm
by Lavigna
Love it. Great movie too.
Scr8p, I sent you a pm.
Re: E-clips keep popping off.
Posted: Thu Jun 21, 2018 3:38 pm
by Coelacanth
I'm guessing the slightly-too-large e-clips might be Metric 3mm e-clips, not Standard 4-40 e-clips...which are a hair smaller. I had the opposite problem trying to get e-clips onto a Kyosho hinge pin...turned out I was trying to get 4-40 e-clips onto 3mm hinge pins. They could be forced on, but had to bend open a smidge and probably suffered structural integrity.
Re: E-clips keep popping off.
Posted: Thu Jun 21, 2018 4:47 pm
by NomadRacer
I have the correct pliers for the snap rings. I bought them during the era when the rings were popular for off-road. I Don't have any snap rings to go with them.
Re: E-clips keep popping off.
Posted: Sat Jun 23, 2018 2:29 am
by Lavigna
NomadRacer wrote: ↑Thu Jun 21, 2018 4:47 pm
I have the correct pliers for the snap rings. I bought them during the era when the rings were popular for off-road. I Don't have any snap rings to go with them.
Do you mean the Parma retainers, like the photo above? I bought some from Scr8p (don't have them yet) and was wondering how you fit them on, or if a special tool is needed.
If you could post a picture of the tool, that would be awesome. Or, if you want to sell it, let me know. Thanks.
Re: E-clips keep popping off.
Posted: Sat Jun 23, 2018 6:16 am
by NomadRacer
@lavigna Yes, works for the Parma and other makers. I'll get you a picture and some words about how the tool in used later this morning (EST). Just got my butt out of the bed and drinking a cup or two of java right now.
Re: E-clips keep popping off.
Posted: Sat Jun 23, 2018 8:55 am
by NomadRacer
@lavigna
Sorry man, I've not been able to put my hands on the pliers as of
yet this morning. Basically what your looking for are external circlip/snap ring/safety ring pliers. Here's a link to an example of what you'd be looking for:
https://www.amazon.com/Neiko-02129A-Mini-Pliers-Piece/dp/B002E08YSY/ref=sr_1_3?ie=UTF8&qid=1529757620&sr=8-3&keywords=snap+ring+pliers+external+small
Basically, you insert the tips of the pliers into the holes of the clip and squeeze the handles to open the clip, enough to slide it over the hinge pin. Only open the clip just enough to get it on an then release the squeeze.
You may be able to get the pliers local. They are commonly found within the automotive tool environment... maybe even a Snap-0n dealer. See a truck. flag it down!
I hope I've been able to help you.
Re: E-clips keep popping off.
Posted: Sat Jun 23, 2018 5:25 pm
by Lavigna
NomadRacer wrote: ↑Sat Jun 23, 2018 8:55 am
@lavigna
Sorry man, I've not been able to put my hands on the pliers as of
yet this morning. Basically what your looking for are external circlip/snap ring/safety ring pliers. Here's a link to an example of what you'd be looking for:
https://www.amazon.com/Neiko-02129A-Mini-Pliers-Piece/dp/B002E08YSY/ref=sr_1_3?ie=UTF8&qid=1529757620&sr=8-3&keywords=snap+ring+pliers+external+small
Basically, you insert the tips of the pliers into the holes of the clip and squeeze the handles to open the clip, enough to slide it over the hinge pin. Only open the clip just enough to get it on an then release the squeeze.
You may be able to get the pliers local. They are commonly found within the automotive tool environment... maybe even a Snap-0n dealer. See a truck. flag it down!
I hope I've been able to help you.
Ok. I actually have a set of those. I thought the Parma retainers may use something different, because they don't look like a regular snap ring with the two loops for the tool. Take a look at the Parma retainers. From the photos I cannot tell how they open, but I am sure I will figure it out once they arrive. Thanks for all the help!
Re: E-clips keep popping off.
Posted: Sat Jun 23, 2018 6:09 pm
by GoMachV
They are the same, just instead of two small holes it’s two small half circles due to the tiny amount of space
Finding a pair of external retaining ring pliers with tips that small isn’t that easy. They are out there, but not like a Harbor Frieght or Sears kind of thing.
