Page 2 of 2
Re: Worlds runner almost done -
Posted: Tue Sep 11, 2012 4:19 pm
by JK Racing
no fan, HW 508 blinky software, PL bowties...all stock settings on the speedo. out of the box, calibrate to transmitter, put it on the track.
and yes, this was outdoor @ night, around 80 degrees
Re: Worlds runner almost done -
Posted: Tue Sep 11, 2012 4:28 pm
by Charlie don't surf
80* is damn fine racing weather!! The guys here have been running a dual fan setup on the 17.5's and going up as much as 4 teeth due to the fans
not sure who's fan set up it is but you can't touch their times w/o them
Re: Worlds runner almost done -
Posted: Tue Sep 11, 2012 10:17 pm
by Vermin
No fans on mine yet either. I guess I'll have to start doing some research as we don't get 80 degrees round these parts much unless it's winter. I'll keep a temp gun on it this weekend if I manage to get out and keep you guys posted
Re: Worlds runner almost done -
Posted: Thu Sep 13, 2012 4:48 am
by joel45acp
I'm running a sensored HW 35amp esc and a leopard 17.5 sensored geared at 68/32 and it comes off the track at 152-155 after an 8min main. Its that exceptible?
Re: Worlds runner almost done -
Posted: Fri Sep 14, 2012 12:27 pm
by Vermin
joel45acp wrote:I'm running a sensored HW 35amp esc and a leopard 17.5 sensored geared at 68/32 and it comes off the track at 152-155 after an 8min main. Its that exceptible?
Would suspect so - my Trinity D3.5 documentation said to keep it under 165 I think?