Re: Trashing a ton of bearings
Posted: Wed Jan 22, 2014 3:34 pm
Good to hear that it's not just me. I go through so many metal shielded 1/4 x 3/16 bearings.
I clean and lube bearings quite often, mainly due to the fact my test track gets super dusty and I run quite a bit. I've come to realize I blow much less bearings after I started the clean and lube regiment. I don't have an oil preference, it's usually what the LHS has on hand either Parma or CRC that I buy.Seabass wrote: What are you guys using for lube if any when rebuilding. I typically don't lube the bearings, just clean them off with a dry brush.
Parma T.Q. Bearing Oil PAR741
- PAR741.JPG (5.73 KiB) Viewed 453 times
- PAR741.JPG (5.73 KiB) Viewed 453 times
- CLN4060.JPG (9.75 KiB) Viewed 453 times
- CLN4060.JPG (9.75 KiB) Viewed 453 times