RC10Talk - The Net's Largest Vintage R/C Community

A little more progress on the 870C.

Is this all resto stuff? Your front hubs are off a 91 i think... Not the standard 870's... I think the standard ran 6 and 8mm and i need to check manal again but think the 8mm are on the front ...

Lookin good

I would appreciate the info on the hubs so that I can replace them with the correct ones. I know I have some parts to replace ( like shocks and front hubs ) to make it more original so will do that as I locate parts.

It looks like the front wheel hubs are on the rear of the car. just may need to swap them out from front to rear.

After looking closer the rear hubs still look like the front ones but the ones on the front are not correct for the car...more like a later 91/92 YZ 10

It looks to me that there is a wide track setup on it.. it is either using rear arms or the standard front arms with the c hub moved to the outer hole.. those hubs could be the ones for the wide track kit.. cool set up.. I am just missing those hub to finish my front for my yz10 project..

Shawn

true hondaman...didnt check the setting...anyway tfor the standard setup

http://www.oople.com/rc/manuals/yz870c/ ... 0c017.html