RC10Talk - The Net's Largest Vintage R/C Community

Coelacanth wrote: ↑Mon Mar 12, 2018 5:33 pm Nice work so far, Jerome! I remember cutting down that front body post too, because it's inexplicably LOOOONG for no real reason...

Makes the car look more like a Rhino than a Buffalo.

Coelacanth wrote: ↑Wed Mar 14, 2018 6:20 pm It might be a good idea to re-check for bump-steer. On my buddy's car, I got very little bump-steer having the tie rod inners mounted on top of the pivot arm, and outers on the bottoms of the steering knuckles. I see you've mounted your tie rod inners beneath the pivot arm. Try it both ways and keep it whichever way has less bump-steer.

All that polished aluminum is pretty...gonna be a real Blingalo.

Thank you!

It's like you says abaout the "rhino touch" . Box art does not have this part or the hole to receive it...

The bump-steer will be a minor détail, because, it will be a shelf queen

NomadRacer wrote: ↑Mon Mar 12, 2018 8:09 pm Wow, this build is turning into a show stopper! Really fine work, I'm envious.

Thank you,

Hope to finish it one day before i'm too old




-----------------

Next step: electronics

Vintage SAMWA parts!







To be continued ...


Jerome

Hello,

Little update with TBG repro body












Some spécial parts are coming, more info soon

To be continued ...

Jérome

Hello,

Some extra parts :










To be continued with some other mega extra giga speciale parts


Jerome

Hi everyones,

Little update with some extra parts from MANOBET



Test and polishing this week-end.

To be continued ...

Jerome

That MANOBET does some very trick stuff
Looking forward to seeing it mounted.

Hi,

Tonight, it was polishing ...





Tomorrow it will be assembling

To be continued ...


Jerome

DennisM wrote: ↑Fri Mar 08, 2019 5:59 am That MANOBET does some very trick stuff
Looking forward to seeing it mounted.

Hi,

MANOBET Facebook page

Mounting on tomorrow

Jérome

hi,

Today, it's time to mount all those amazing parts !!!











To be continued ...

Jerome

Some pics of a small motor for this chassis





More pics coming soon.

I start to clean it, but the big PB is that the magnet are not glued ... !!!!


To be continued ...


Jerome

Update !

Cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing, cleaning, polishing...





...
























New MANOBET exclusive parts :








More to come


To be continued ...


Jerome

My hands are throbbing just thinking about all that polishing , looks great .

Dadio wrote: ↑Sun Jun 02, 2019 5:59 am My hands are throbbing just thinking about all that polishing , looks great .

Hi,

Mine too

Thank you

Jerome

Nice looking Bobcat - It would be great to see it painted and decaled.

Did Jerome ever finish this beauty?

mirrorman wrote: ↑Mon Sep 21, 2020 4:04 am Nice looking Bobcat - It would be great to see it painted and decaled.

Did Jerome ever finish this beauty?

Hi,

Thank you, i'm waiting for new MANOBET parts before finishing


Jerome

Old thread revived

We seem to share a passion for polishing parts

http://www.inetrc.com/AYK/Details/AYKBuffalo.htm

-Alex