RC10Talk - The Net's Largest Vintage R/C Community

bngiles wrote:

jeffrm20 wrote:Do you know if the spur gears for these trucks are still readily available? My friend has an older TL truck with the same type of spur gear set-up but we cannot find them anywhere. Sorry to hijack your thread.

Jeff

Yo came to the right place, someone here ought to be able to hook you up. What tooth count you looking for?

if it's a truck, he may need a 90 (orange) or 92 (blue) tooth. You can go smaller, but you'll have to use a smaller pinion.

Another option would be to find a spur adapter for the losi top shaft. This way, your friend can use gears from other manufacturers.

1 x a3982 48 pitch 82 tooth spur (for non-slipper models)
1 x a3984 48 pitch 84 tooth spur (for non-slipper models)
1 x a3986 48 pitch 86 tooth spur (for non-slipper models)

http://vintagelosi.com/RC_Car_Kings.html

As of 4/29 they had them in stock. Like the last post said, you want a higher tooth one. But if you can't find any, this might be an option.

Rear Shock Tower problem solved. Thanks Rick/bearickster. Let me know if you want to still do the straight swap for the trans cases.