Page 2 of 2
Re: '85 Gold Pan Resto-Mod...Need Some Advice Here!
Posted: Sun Jan 25, 2009 8:41 pm
by VINTAGE10
Whoa...didn't expect that! That is a very kind offer, PBR, but before you go choppin' up a chassis, let's see what a01butal has to say about the templates he may have!
Re: '85 Gold Pan Resto-Mod...Need Some Advice Here!
Posted: Sun Jan 25, 2009 8:52 pm
by a01butal
I sent a pm with a scan of the template if that won't work I gave you info on how to get the real thing from me. Also you may want to learn about fitting the later Slipper assembly from I think a b3 or 4 and that would be an excellant hop up for the extra power.
Re: '85 Gold Pan Resto-Mod...Need Some Advice Here!
Posted: Sun Jan 25, 2009 9:00 pm
by PBR Allstar
a01butal wrote:I sent a pm with a scan of the template if that won't work I gave you info on how to get the real thing from me. Also you may want to learn about fitting the later Slipper assembly from I think a b3 or 4 and that would be an excellant hop up for the extra power.
DV8ion wrote:Yup I did make the switch over to the B4 spur/slipper combo and it works amazingly. All you need is a few parts and your good to go.
Heres a list of parts you will need to make the switch.
- Spur gear 81T (9651)
Slipper hub (9604) x2
Slipper pads (9603) x2
Top Shaft (9601)
Slipper Spring (9605)
Slipper locknut (6629) or a 5-40 locknut
As for using a complete B4 Stealth.....it won't work without alot of modding to both the tranny case and your chassis. You can still use your stock gear cover on this conversion......all you have to do is make sure you setup your slipper and then just mark and Dremel the excess off the top shaft end.
Heres a pic of what it ends up as.
[/quote]
here's the info on using the later B4 slipper setup on a first generation 2.25 stealth trans
Re: '85 Gold Pan Resto-Mod...Need Some Advice Here!
Posted: Sun Jan 25, 2009 9:28 pm
by VINTAGE10
Did I mention that I LOVE THIS SITE?! You guys are RAD...I'm gettin' all warm and fuzzy feelin'! This may be my last post for tonight, though, for I must sleep now. Thanks so much again! See yall tomorrow...
Re: '85 Gold Pan Resto-Mod...Need Some Advice Here!
Posted: Sat Mar 14, 2009 10:40 pm
by justinspeed79
a01butal wrote:I sent a pm with a scan of the template if that won't work I gave you info on how to get the real thing from me. Also you may want to learn about fitting the later Slipper assembly from I think a b3 or 4 and that would be an excellant hop up for the extra power.
Do you think you could send that to me also? Please.
I want to put a stealth in my graphite runner. The only thing that's keeping me from doing now is drilling the holes. I'm sure I could do it without the template, but it would be nice to have it.
Re: '85 Gold Pan Resto-Mod...Need Some Advice Here!
Posted: Sat Mar 14, 2009 10:46 pm
by justinspeed79
justinspeed79 wrote:a01butal wrote:I sent a pm with a scan of the template if that won't work I gave you info on how to get the real thing from me. Also you may want to learn about fitting the later Slipper assembly from I think a b3 or 4 and that would be an excellant hop up for the extra power.
Do you think you could send that to me also? Please.
I want to put a stealth in my graphite runner. The only thing that's keeping me from doing now is drilling the holes. I'm sure I could do it without the template, but it would be nice to have it.
Actually, I just realized I have an old 10T chassis I can use. Thanks anyway.
Re: '85 Gold Pan Resto-Mod...Need Some Advice Here!
Posted: Sat Mar 14, 2009 11:11 pm
by a01butal
justin, just sent a pm with the template scans. Looks like you may not need them but it can't hurt to have some frame of reference.