RC10Talk - The Net's Largest Vintage R/C Community

Oh, and I finally sorted the body mount/post for my A&L towers too.

I think we can compromise on the XT chassis. Just need the Body, Body Mounts and wheels and tires. Close enough. Technically the Pro needs a different chassis too but take what we can.

That said, anecdotally seems these are a hit worldwide. Horizon has the deep pockets and a different chassis they could handle easy enough.

The body mount files that I posted would cover the body mount needs of the Jrxt I just need to enlarge the hole in the front of the skidplate a tad for the screw head, the front is a little tricky to print the back is easy peasy.

only need body, chassis, and wheels/tires for the jrxt

Oh yeah I say the Ender 3's are good as well, I bought one.. then bought a second. I have the Pro models because they said the power supply was better.. The main one I am using I have swapped to the Ender 3 glass bed as the only mod.. been using it nearly 2 years now and only replaced nozzles

juicedcoupe wrote: ↑Tue Jun 21, 2022 2:43 am Use the steering rate (SR) adjustment.

Right, but that leaves me with full steering-lock to the right and only about 70% steering to the left...

dldiaz wrote: ↑Tue Jun 21, 2022 5:22 pm

juicedcoupe wrote: ↑Tue Jun 21, 2022 2:43 am Use the steering rate (SR) adjustment.

Right, but that leaves me with full steering-lock to the right and only about 70% steering to the left...

You should remove servo saver, center transmitter while powered up, then reinstall servo saver making sure steering bellcranks are straight. Also check tie rod lengths..

BattleTrak wrote: ↑Tue Jun 21, 2022 5:34 pm

dldiaz wrote: ↑Tue Jun 21, 2022 5:22 pm

juicedcoupe wrote: ↑Tue Jun 21, 2022 2:43 am Use the steering rate (SR) adjustment.

Right, but that leaves me with full steering-lock to the right and only about 70% steering to the left...

You should remove servo saver, center transmitter, then reinstall servo saver making sure steering bellcranks are straight. Also check tie rod lengths..

This.

WriteDean wrote: ↑Tue Jun 21, 2022 1:16 pm Can someone post a link to get the nylon nuts?

I have been using ones out of my stash… but looking around, it’s kinda dry! OldRC has some..

https://www.ebay.com/itm/265534299397?hash=item3dd313dd05:g:T-YAAOSw2DNh~dXH

Pack of 100 white nylon with the flange just like OG
https://www.mcmaster.com/#94909A005

Changed orientation. Much less flex/much stronger.

Looks perfect! I'd buy one.

Ok parts absolutely nobody ask for or wants because I don't want to buy bearings for the mockup car!

I guess they are good if someone wants to build a shelfer and make it look right.

Flexy Turners: https://cults3d.com/en/3d-model/game/losi-mini-jrx2-vintage-style-servo-saver-bellcranks-without-bearings

Bumper looks great, glad to see everyone has had good luck printing them Chassis is almost done, printing another hole calibration part right now

Got an email that my hat from the pre-order is on the way. Hope everyone else is getting one too.

Update!

My chassis design has been updated, there has been a thorough tweaking of the model to more correctly represent the size difference of the Molded and Jrx2 chassis. If you grabbed it before grab a new one! I will do up a chassis brace soon.

I also have more parts in the mail so will be able to work on h-arm models on thursday!

Here is a pic of the differences!

Doh!

GoMachV wrote: ↑Tue Jun 21, 2022 10:12 pmDoh!

DOH! Sorry Jeff! I did say it was a work in progress, I spent all day adjusting things very carefully