Page 197 of 356
Re: The Official "What is it?" Thread
Posted: Tue Jan 13, 2015 6:01 pm
by Incredible_Serious
Sabba wrote:Hello tomolupus
incredible that you found or remembered this advertising.
Great thanks for that, because I really searched for, but couldn't find it.
Only in an actual american ebay-auction I found yesterday the same combination of front and rear axle called as an Associated but I couldn't believe that.
Now I have a pretty good info, thanks a lot.
Greetings
RF
Great work by tomoplus, I knew I recognised it, but couldn't quite remember why... I used to have one of these, new built... here's a picture:
Sold now... but definitely a CX12.
Alex
Re: The Official "What is it?" Thread
Posted: Tue Jan 13, 2015 8:37 pm
by klavy69
works92 wrote:the front shocks (maybe duratrax?):
.
Phil, these shocks look to be traxxas.
Todd
Re: The Official "What is it?" Thread
Posted: Tue Jan 13, 2015 10:02 pm
by works92
Thank's to you klavy69 !
Still, the carbon parts (which I suppose are CML production )
The center shafts and front diff pulley (I bet on Tomy parts)
and the bearing steering (which seems to be a GPM one)
Re: The Official "What is it?" Thread
Posted: Tue Jan 13, 2015 10:32 pm
by Incredible_Serious
works92 wrote:Still, the carbon parts (which I suppose are CML production )
I don't know for a fact, but the weave in the carbon parts remind me of some FibreLyte Cat 2000 EC parts I used to have.... the chassis looks a *bit* like the Yok 870C chassis
http://www.fibre-lyte.co.uk/fl/cars/yokomo/870c.html, and the front shock tower looks like a YZ10 Works part (
http://www.fibre-lyte.co.uk/fl/cars/yokomo/yz10works.html, part WORKS03.... albeit both with slightly different holes.
Alex
Re: The Official "What is it?" Thread
Posted: Tue Jan 13, 2015 11:34 pm
by naushad
I had a works '93 car which I think had those arms too! They had kyosho optima hubs.
DennisM wrote:works92 wrote:Hi all,
I need your help to identify the origins of parts fitted a Yokomo Works91 that i purchase recently.
the front A-arms:
Phil.
I´ve got a set of the front arms - They were in a bag with a headercard from MMS.
IIRC, also referred to as "Drescher" arms
http://www.rc10talk.com/download/file.php?id=84871&mode=view
Re: The Official "What is it?" Thread
Posted: Tue Jan 13, 2015 11:38 pm
by naushad
Second lot are definitely kyosho...maybe from their more budget range of buggies.
I would say last lot do look like schumey, maybe from a cougar?
R Cane wrote:Help ID'ing these shocks?
all aluminum, a spring inside the cap
DSC04036.JPG
have a peg on the shock body and adjustable notches for spring spacing
DSC04038.JPG
I didn't even see the slight yellow/orange tint on the bodies until I looked at the pictures, so maybe these are color stripped...
DSC04039.JPG
Re: The Official "What is it?" Thread
Posted: Wed Jan 14, 2015 2:11 am
by EvolutionRevolution
works92 wrote:
the front hubs are RPM, but what about the C-hubs, and did RPM really do this for the works91 or is this for another car ?
C-hubs look like Kyosho Optima to me.
Chassis parts, Fibre Lyte?
Re: The Official "What is it?" Thread
Posted: Wed Jan 14, 2015 2:27 am
by alien3t
EvolutionRevolution wrote:works92 wrote:
the front hubs are RPM, but what about the C-hubs, and did RPM really do this for the works91 or is this for another car ?
C-hubs look like Kyosho Optima to me.
Chassis parts, Fibre Lyte?
yokomo did make a c hub this style, used a kingpin I think,
Re: The Official "What is it?" Thread
Posted: Wed Jan 14, 2015 3:11 am
by Jirka
Optima C-Hubs and Optima steering blocks or compatibles should be used with those Drescher arms in Yokomo.
Jirka
Re: The Official "What is it?" Thread
Posted: Wed Jan 14, 2015 6:40 am
by works92
Thank you for all those informations guys, I know a lot better now on my new buy.
If it could help to identify the carbon parts, the chassis got plies of fiber glass or kevlar in is middle ....
Re: The Official "What is it?" Thread
Posted: Wed Jan 14, 2015 7:50 am
by prp
For works 92 parts
the front diff:
Pulley in tufnol from SRM Racing/RW Racing
the center shaft:
Spur gear adaptator from SRM Racing/RW Racing
Re: The Official "What is it?" Thread
Posted: Wed Jan 14, 2015 7:54 am
by works92
Merci Pierre !
Au top, comme d'hab.
Re: The Official "What is it?" Thread
Posted: Wed Jan 14, 2015 3:01 pm
by tomolupus
Incredible_Serious wrote:Sabba wrote:Hello tomolupus
incredible that you found or remembered this advertising.
Great thanks for that, because I really searched for, but couldn't find it.
Only in an actual american ebay-auction I found yesterday the same combination of front and rear axle called as an Associated but I couldn't believe that.
Now I have a pretty good info, thanks a lot.
Greetings
RF
Great work by tomoplus, I knew I recognised it, but couldn't quite remember why... I used to have one of these, new built... here's a picture:
CX12.jpg
Sold now... but definitely a CX12.
Alex
Good info there, the name LEE'S ENTERPRISES on the manual.
And more here
http://www.rc10talk.com/viewtopic.php?f=33&t=27413
Re: The Official "What is it?" Thread
Posted: Wed Jan 14, 2015 11:52 pm
by RC10resto
1/10 Lexan body, wing and undertray with green overspray film - what car is it for
Re: The Official "What is it?" Thread
Posted: Thu Jan 15, 2015 2:56 pm
by Mr. ED
RC10resto wrote:1/10 Lexan body, wing and undertray with green overspray film - what car is it for
looks like Tomy to me