RC10Talk - The Net's Largest Vintage R/C Community

Posted: **Fri Dec 11, 2009 12:07 pm**

badhoopty wrote:forgive the dust, this one's been on the shelf awhile.

Ohooo I like this one!! Sweeeet nice mono shock setup too.

Posted: **Sat Dec 12, 2009 8:52 am**

Awesome builds fellas.

Lexus-5: Thanks for starting this thread. Its good inspiration to start on a silver chassis I got from Lowerydesign awhile back.

SofaKing: Build that sucker. Nice combination of blue anno parts.

Posted: **Sun Jan 17, 2010 1:29 am**

SofaKing wrote:Hey lexus-5, that's a great looking buggy you've got there. I've been collecting parts for awhile now to put one of these together. But first I have to thank a few board members for their assistance with gathering parts.

RC10resto/Brian - Chassis (practically had to pry it from his hands)
murphy3428 - litesink
Lowrydesign - Kose axles
rctenracer - thorp 48 pitch gears
&
I apologize to whoever it was that helped me get those front hpi's

Some assembly required (hopefully soon)
Sassy build.jpg

Hows this build coming along?

Posted: **Sun Jan 17, 2010 1:54 am**

Word has it that he is wrenching on it as we type

Let's see some pics Dave

Posted: **Sun Jan 17, 2010 4:48 pm**

Brian is absolutely correct, I just started wrenching on this Friday night.

Here's what I've got so far.

I know it's not much but I'm super critical (insert OCD here) when I assemble these so it probably takes me three times as long as it would anyone else

. I've got a brand new six gear case one the way for the 48 pitch gear set but I think I might put these in before it gets here.

Thanks,
Dave

Posted: **Sun Jan 17, 2010 6:09 pm**

Looks awesome so far Dave. Keep the pics coming.

Posted: **Sun Jan 17, 2010 7:50 pm**

Wouldn't it be nice if there was some sort of metal chassis like that available for vintage racers?

I have a black sassy chassis that I haven't built and it will probably stay in the bag as I like to drive my buggies.

Here is my current sassy runner... I have a better speedo now that traxxas is dead. Bumber is gone too...

That blue chassis is dead cool by the way!

Posted: **Sun Jan 17, 2010 10:13 pm**

Sofaking nice parts collection.

Murphy sweet setup!

Posted: **Mon Jan 25, 2010 12:53 am**

I was able to work on this a bit over the weekend and got the front end dialed in.

I have a question though, did any of you that have one these chassis' run into a problem with the mounting holes for the battery cup being off? For some reason on this one battery cup the holes are at least 1/8 of an inch off.

Thanks,
Dave

Posted: **Mon Jan 25, 2010 12:57 am**

I really, really love this build--my only problem is that I don't have those RCPS links, NIP old RPM ball cups, and another NIP worlds bellcrank set!--Super sharp car!--what are you planning on for wheels and tires?

Posted: **Mon Jan 25, 2010 1:20 am**

Charlie don't surf wrote:what are you planning on for wheels and tires?

First off thanks for the compliment on the build. As far as wheels go I'm planning on using white HPI stars with TQ21's in the rear and Pro-line 8115 quatro re-enforced rib fronts (there in a pic somewhere on the first page).

Charlie don't surf wrote: I don't have those RCPS links

Posted: **Mon Jan 25, 2010 1:23 am**

Cool tire and wheel choice! I'm surprised that you're not going with the TQ71 3 rib front-

why do you taunt me with that pic?

Posted: **Mon Jan 25, 2010 1:37 am**

Charlie don't surf wrote:I'm surprised that you're not going with the TQ71 3 rib front

I originally wanted to but I don't have any NIP

. Although there is a pair on the bay right now that's ending soon so you never know!

I always thought those links were RCPS as well then I got a hold of these. I guess I snapped a pic before I cut into them just for future reference. No taunting intended

Posted: **Mon Jan 25, 2010 1:43 am**

Everyone else picks on me, you might as well start! I have seen early lunsfords as well and they look identical to the RCPS, but I guess it was easiest to lathe some hex stock! And I have a not NIP but super sharp set of the TQ71 if you can't dig up a NIP pair and decide to go that route after all

Reggie

Posted: **Mon Jan 25, 2010 2:09 am**

Charlie don't surf wrote: I have a not NIP but super sharp set of the TQ71 if you can't dig up a NIP pair and decide to go that route after all

You don't say, well considering what prices on the bay have been like lately I may have to take you up on that offer. I'll keep you posted.
Thanks,
Dave

RC10Talk - The Net's Largest Vintage R/C Community

Anybody got one of these? Love to see your pictures.

Re: Anybody got one of these? Love to see your pictures.

Re: Anybody got one of these? Love to see your pictures.

Re: Anybody got one of these? Love to see your pictures.

Re: Anybody got one of these? Love to see your pictures.

Re: Anybody got one of these? Love to see your pictures.

Re: Anybody got one of these? Love to see your pictures.

Re: Anybody got one of these? Love to see your pictures.

Re: Anybody got one of these? Love to see your pictures.

Re: Anybody got one of these? Love to see your pictures.

Re: Anybody got one of these? Love to see your pictures.

Re: Anybody got one of these? Love to see your pictures.

Re: Anybody got one of these? Love to see your pictures.

Re: Anybody got one of these? Love to see your pictures.

Re: Anybody got one of these? Love to see your pictures.

Re: Anybody got one of these? Love to see your pictures.