Page 3 of 4
Re: Oval Truck Build (question 1/14)
Posted: Fri Apr 15, 2011 9:34 pm
by THEYTOOKMYTHUMB
SRTracer121 wrote:bdw, i like the rambling, it adds character to the posts
Ramblings?? I think I generally stick to only absolutely essential information about r/c in all of my posts…
Oh, by the way. I would have logged in earlier, but I was busy with a homemade pie.(if this picture had sound you’d hear the bubbling cheese)
The more I think about my body idea I think the cooler it might be…if I don’t blow it!!!
Wheel choices?
I’m going to start really searching tonight. I was just on my way out of work earlier…
Now if you’ll excuse me I promised my daughter I’d watch a couple of episodes of Inspector Gadget. Like me she likes her retro.
Later
Re: Oval Truck Build (wheel help? 4/15)
Posted: Sat Apr 16, 2011 3:32 pm
by THEYTOOKMYTHUMB
Would RPM or HPI be easier to fit on to this truck some how? I wish I could see all these wheels up close and personal. It'd be a lot easier to come up with a plan of attack. All the LHSs around here keep fairly low inventories of truck wheels.
Like these?
http://www.amainhobbies.com/product_info.php/cPath/1_26_40/products_id/154867/n/RPM-Slingshot-12-Spoke-Rear-Truck-Wheels-White-2-3-16-Associated
Or these? Would one be more likely to be made to fit than the other. HPIs always seem rather adaptable. I have some in the basement I may dig out and mess around with to see.
http://www.amainhobbies.com/product_info.php/cPath/1_26_40/products_id/50140/n/HPI-22-Spike-Truck-Wheel-Black-Chrome-2
Traxxas?
http://www.amainhobbies.com/product_info.php/cPath/1_26_40/products_id/17574/n/Traxxas-Rear-22-Dyeable-Wheels-2
Re: Oval Truck Build (wheel help? 4/15)
Posted: Sat Apr 16, 2011 3:55 pm
by THEYTOOKMYTHUMB
I forgot I had these, which obviously work easily and would clean up nice with peroxide and new tires, but I'm going for a lighter more modern look. These look tough, but cumbersome.(warning! crappy cell phone pic ahead)...and yes, I will now have "Cumbersome" by Seven Mary Three stuck in my head for a while now...
Re: Oval Truck Build (wheel help? 4/15)
Posted: Sat Apr 16, 2011 7:30 pm
by SRTracer121
traxxas rims would need a floating axle for the fronts, the only rims with bearings in them use the 5x11 bearing.
Re: Oval Truck Build (question 1/14)
Posted: Sat Apr 16, 2011 10:39 pm
by klavy69
THEYTOOKMYTHUMB wrote:I have a new direction I want to go anyway. For starters, anyone know of any wheels similar to these that might be modified to fit this?
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNHW8&P=ML
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXYJW6&P=7
Just a few for thoughts as I went thru tower hobbies. Are you after 2.2 or buggy or touring car or ?
Todd
Re: Oval Truck Build (question 1/14)
Posted: Sat Apr 16, 2011 10:58 pm
by THEYTOOKMYTHUMB
klavy69 wrote:Are you after 2.2 or buggy or touring car or ?
Todd
Well, I wasn't 100% sure until I took another good close look at the chassis tonight. I even thought of going to a low profile 8th scale buggy tire/wheel combo. I think I will stay with 10th scale truck rims though. I think they scale out really nicely(of course I guess they should since it's a 10th scale chassis
). I had also considered 2.2 rear buggy rims all around. m_vice did a really cool mod recently that made me think pretty much anything can be done with the right amount of work and thought. I'm leaning toward these I think. I usually like everything black, but I really want bright white rims for some reason. Thanks for the input. Keep it comin'! I need all the help I can get.
http://www.amainhobbies.com/product_info.php/cPath/1_26_40/products_id/154883/n/RPM-Bully-5-Spoke-Rear-Wheels-White-1-4-Associated
Re: Oval Truck Build (wheel help? 4/15)
Posted: Sat Apr 30, 2011 5:52 pm
by THEYTOOKMYTHUMB
Re: Oval Truck Build (wheel help? 4/15)
Posted: Mon May 02, 2011 2:21 pm
by SRTracer121
hey, ive got some interesting foams if your interested, they are for the gt. we run rubber on our oval so i dont need them and they are pretty beat but im sure they could be cleaned up
Re: Oval Truck Build (wheel help? 4/15)
Posted: Thu May 05, 2011 2:33 am
by THEYTOOKMYTHUMB
SRTracer121 wrote:hey, ive got some interesting foams if your interested, they are for the gt. we run rubber on our oval so i dont need them and they are pretty beat but im sure they could be cleaned up
Thanks, I did consider some silicone treated foams, but I think I have it all figured out. Now I just need time, and more importantly a good permanent workspace. I love the location of my house, but I really need more room.
I think it's time to move...
Re: Oval Truck Build (wheel help? 4/15)
Posted: Thu May 05, 2011 3:09 am
by SRTracer121
well see the trick to a hobby room is to just toss out the idea of keeping a room/house nice, my hobbyroom/bed and clothing storage (who needs sleep all you need is a blast of spent nitro!) is totally trashed, carpets, walls, furniture, all of it is ruined and smells of nitro fuel, rubbing compound and acetone. theres a hole in my wall from my gt and one downstairs from my nitro hawk (just love them small blocks!)
are you set on a body yet?
Re: Oval Truck Build (wheel help? 4/15)
Posted: Thu May 05, 2011 12:12 pm
by THEYTOOKMYTHUMB
SRTracer121 wrote:well see the trick to a hobby room is to just toss out the idea of keeping a room/house nice, my hobbyroom/bed and clothing storage (who needs sleep all you need is a blast of spent nitro!) is totally trashed, carpets, walls, furniture, all of it is ruined and smells of nitro fuel, rubbing compound and acetone. theres a hole in my wall from my gt and one downstairs from my nitro hawk (just love them small blocks!)
are you set on a body yet?
If only I were single!
I'm not 100% sure on the body, but I think I have it all figured out. I hope to get motivated enough to finish this soon. If there were a class for it at my local track it would be done by now. I'm really dragging my feet...
Re: Oval Truck Build (wheel help? 4/15)
Posted: Thu May 05, 2011 1:16 pm
by SRTracer121
there again, you gotta be smart, just invent and push a class that you can run the car in, i wanted to run my rc10gt so i started 1/10th open wheel and now we have 9 people running every week.
ya know i also invented the phrase "delusions of grandeur"
but back on track or i guess thread really...
Re: Oval Truck Build (getting closer)
Posted: Tue Jan 17, 2012 11:03 am
by THEYTOOKMYTHUMB
I'm itching to get back to some buliding and racing. Should I attach these to the stub axles I have, or is there another choice I can use that may give me more wheel options? I'm a little embarrassed to ask, but can I attach these to the ones I have without destroying them? The pin didn't seem to want to release.
Re: Oval Truck Build (axle question 1/17)
Posted: Tue Jan 17, 2012 11:51 am
by scr8p
i'd have to look, but you should be able to get these as a complete kit (if you're worried about messin up the ones you have). i just hope they'll work for ya, not that you drop $30+ and they don't.
Re: Oval Truck Build (axle question 1/17)
Posted: Tue Jan 17, 2012 12:04 pm
by THEYTOOKMYTHUMB
scr8p wrote:i'd have to look, but you should be able to get these as a complete kit (if you're worried about messin up the ones you have). i just hope they'll work for ya, not that you drop $30+ and they don't.
I actually bought them that night. They've been collecting dust ever since.
I believe they'll work anyway, but if not then I figured I'd have them for a possible future project. I think I'm just going to get mine apart to begin with. I bought some pins that should work.