Re: LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pics 20
Posted: Thu Mar 15, 2012 12:05 pm
Yes, 2 small below and 2 big on the upper plate...only for good driver 
RC10Talk - The Net's Largest Vintage R/C Community
LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pic 1/2013.
Page 3 of 4
Re: LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pics 20
Posted: Thu Mar 15, 2012 12:23 pm
Yikes! Not for me then
Re: LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pics 20
Posted: Wed Mar 21, 2012 8:25 am
I have seen more pics of lazers that had the same mod but the best pic is on dunn´s.
Easiest way to spot em original bumper or not.
mvh Isobarik
Easiest way to spot em original bumper or not.
mvh Isobarik
Re: LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pics 20
Posted: Wed Mar 21, 2012 9:49 am
What does it do? Weight saving?
Re: LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pics 20
Posted: Wed Mar 21, 2012 3:52 pm
More caster and the front stops digging in the ground basiclly what yokomo did to YZ-10
When ever you see an pic of an lazer with no mark ( kyosho ) on the front bumper
then you might suspect that it has this mod.
mvh Isobarik
When ever you see an pic of an lazer with no mark ( kyosho ) on the front bumper
then you might suspect that it has this mod.
mvh Isobarik
Re: LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pics 20
Posted: Wed Mar 21, 2012 4:18 pm
Have you some pics... 
Re: LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pics 20
Posted: Thu Mar 22, 2012 2:45 am
I'm not sure I understand the "more caster" bit. Caster would only be increased if the front mounting point of the wishbones was raised, right?isobarik wrote:More caster and the front stops digging in the ground basiclly what yokomo did to YZ-10
When ever you see an pic of an lazer with no mark ( kyosho ) on the front bumper
then you might suspect that it has this mod.
mvh Isobarik
Re: LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pics 20
Posted: Thu Mar 22, 2012 2:57 am
Since the arms are mounted to the front gearbox and when you lean the gearbox backwards you get the benefit of more caster and the front from digging in the ground.
mvh Isobarik
mvh Isobarik
Re: LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pics 20
Posted: Thu Mar 22, 2012 3:02 am
Not saved but i guess i can dig some up, there is an guy here with an dukemo he has some pics of an lazer and i would guess kick up mod.prp wrote:Have you some pics...
Found it !!!
mvh isobarik
Re: LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pics 20
Posted: Thu Mar 22, 2012 10:33 am
Ah. Does that mean the screw holes in the gear box have to be redrilled, or is is purely a combination of a shorter top deck and some shimming that makes the mod possible?isobarik wrote:Since the arms are mounted to the front gearbox and when you lean the gearbox backwards you get the benefit of more caster and the front from digging in the ground.
mvh Isobarik
Re: LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pics 20
Posted: Tue Jan 22, 2013 12:04 pm
Some update pics, body paint...:
Need always A&L alloy motor plate, RACE PREP blue stick and Big Red One and 2 motor stickers, White Kyosho
and Team losi Junior 2 (orange and pink)...
Thanks to Jason for the Race prep sheet...
Need always A&L alloy motor plate, RACE PREP blue stick and Big Red One and 2 motor stickers, White Kyosho
and Team losi Junior 2 (orange and pink)...
Thanks to Jason for the Race prep sheet...
Re: LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pic 1/2
Posted: Tue Jan 22, 2013 12:09 pm
Very nice paintjob, prp. 
Re: LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pic 1/2
Posted: Tue Jan 22, 2013 4:04 pm
Then again, prp knows his paint tricksCoelacanth wrote:Very nice paintjob, prp.
Tu nous l'amene a la fin Mars, Pierre? je te prete les saddles pour le rouler en course
It's gorgeous!
Paul
Re: LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pic 1/2
Posted: Tue Jan 22, 2013 4:51 pm
Amazingly well performed!
Re: LAZER ZXR Mike DUNN Replica 91 Nats champ Update Pic 1/2
Posted: Wed Jan 23, 2013 10:06 pm
PRP Really nice work on your car. Do you have a drawing for that front shock tower? I would really like to make one of my own.