My green, gold, and white build

[jwscab]

Thin tubing is available. I did the same thing with some traxxas bellcranks.

[Phin]

Your Traxxas bellcrank mod is where I remembered seeing the tubing used. I tried out the Traxxas bellcranks and formed a tube out a thin piece of aluminum sheeting that roofers use around chimneys. Worked pretty good.

EDIT: Here's a quick pic of the spacer:

spacer.jpg (40.93 KiB) Viewed 976 times

spacer.jpg (40.93 KiB) Viewed 976 times

[jwscab]

send you a PM, but here is a link to the tubing necessary:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXAFV4&P=7

[flipwils11]

Thanks guys, I'll check it out.

[Norman]

i run that same steering setup and i use the 4-40 screws that you have in the pic and it works fine. I got them off another gold pan i got a while back and I figured it was how it was ment to be. lol.

[flipwils11]

Still need to track down that thin tubing to do the bellcranks the right way, but here she is mostly finished. Will wire it up when I locate the orange Novak steering servo to match. Go to my gallery for several more pictures of the buggy.