RC10Talk - The Net's Largest Vintage R/C Community

Hi Guys,

Hi n20capri,

The wheels are Jaco World GT spec,

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEXZX&P=7

The wheel adapters are Team Cobra On Road Wheel Adapters for 3/16 axles,

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXA233&P=ML

Some more progress,

I tried to use TC3 MIP cvds (50 mm) on the rear but they are about 5mm too long and bottom

out before the shock bottoms out.

I have found some shorter ones on E-bay ( 44mm ) just have to be patient until they turn up.

For the front cvds I was able to use RC10 buggy rears, they are 5mm short but with 2 GT

# 7669 drive shims on the RC10 rear axles they work.

Cheers, Dave.

THANKS! Any change you can post more detailed pics of the wheels/adapters and how they mount? On and off the car please?
Much appreciated!

DaveM wrote:Hi Guys,

Hi n20capri,

The wheels are Jaco World GT spec,

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEXZX&P=7

The wheel adapters are Team Cobra On Road Wheel Adapters for 3/16 axles,

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXA233&P=ML

Cheers, Dave.

Hi Guys,

Hi n20capri,

I have some more pics,

Wheel mounting and front body mounts and bumper.

The bumper I flipped over, then shortened the ends by 20mm, and re-drilled the mounting

holes to tuck it in further.

I can't remember who made the body mounts, they were from when I first put this car together.

Cheers, Dave.

Hi Guys,

My RC10SS is still not finished,

but I thought you might like some updated pics.

Cheers, Dave.

Did you get your spacers yet Dave?

Hi RJ,

Yep, got the spacers for the rear,

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNTA0&P=ML

but still need to work on narrowing the front.

Cheers, Dave.

is that a Parma 61 impala body? build looks awesome.

Hi Alien3t,

Thank you,

Yep, you're right Parma 61 Chevy Impala #10196.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDA46&P=7

Cheers, Dave.