Page 25 of 40
Re: Ten4: the 4WD RC10 project
Posted: Tue Aug 25, 2015 4:34 pm
by vintage AE
GoMachV wrote:Chain and sprockets are ordered
I agree with the wheels but it's what I had
come on just a couple hundred bucks to get ya come cool wheels
Re: Ten4: the 4WD RC10 project
Posted: Tue Aug 25, 2015 10:38 pm
by GoMachV
I hate painting!
Side note, made a shorty lipo tray that allows adjustment fore and aft. No drilling needed
Re: Ten4: the 4WD RC10 project
Posted: Tue Aug 25, 2015 10:50 pm
by vintage AE
but you are good at it, and I like the number
Re: Ten4: the 4WD RC10 project
Posted: Tue Aug 25, 2015 11:04 pm
by mikea96
I like it!
Re: Ten4: the 4WD RC10 project
Posted: Tue Aug 25, 2015 11:14 pm
by DennisM
Cool Mr. Jeff
Re: Ten4: the 4WD RC10 project
Posted: Wed Aug 26, 2015 1:50 am
by DaveM
Hi Gomachv/Jeff,
Nice work!
What drive shafts are you using in the front for the short arms?
Cheers, Dave.
Re: Ten4: the 4WD RC10 project
Posted: Wed Aug 26, 2015 2:40 am
by GoMachV
B4 CVA shaft with B44 stub axles
Re: Ten4: the 4WD RC10 project
Posted: Wed Aug 26, 2015 2:47 am
by DaveM
Hi Jeff,
Bugger! you beat me to it, don't tell anyone I am planning to do a Ten4 short arm buggy as well.
Thank you for the parts information.
Cheers, Dave.
Re: Ten4: the 4WD RC10 project
Posted: Wed Aug 26, 2015 3:03 am
by GoMachV
chain and sprockets are on the way, in case that was in your plans too
btw, If you need a tower for 56 shocks like mine let me know. The CE will work also, bottom row of holes. I made the 56 classic style tower just to retain the look and use up a set of 56 shocks
Re: Ten4: the 4WD RC10 project
Posted: Wed Aug 26, 2015 9:28 pm
by hugger19
so is the front trans case ready for sale yet????????
Re: Ten4: the 4WD RC10 project
Posted: Wed Aug 26, 2015 10:04 pm
by mk-Zero
None of the plastic parts are available yet, i will release all the parts at the same time.
Re: Ten4: the 4WD RC10 project
Posted: Thu Aug 27, 2015 12:42 am
by wydraz
and when they are released you better believe I'm a buyin'
Re: Ten4: the 4WD RC10 project
Posted: Thu Aug 27, 2015 12:44 am
by wydraz
Jeff I'm liking the lipo trays, may need to get me some
How is the servo mounted in that orientation? Did you need to drill? I might just be slack and use servo tape
Re: Ten4: the 4WD RC10 project
Posted: Thu Aug 27, 2015 12:49 am
by DaveM
Patience, Brothers, patience
Brian said in a previous post, he wants to test all the parts again to make sure everything is up to
scratch and not going to break, also that the belt is not going to stretch.
Cheers, Dave.
Re: Ten4: the 4WD RC10 project
Posted: Thu Aug 27, 2015 12:57 am
by alien3t
If it helps. Shapeways iirc saw on FB, free shipping on $35 or more orders.