RC10Talk - The Net's Largest Vintage R/C Community

From what I remember, the balls on the ends are color coded as to what they fit. I've seen red, white and blue ones. White were for rc10.

I know there are threads on here discussing it.

Hello fellow rc enthusiasts, I'm a new member on the forum and this is my first post. I've recently puchased a associated rc1 for 325$ motor was gummed up and missing electronics. But my question is the body I got with it I've done quite a bit a research and haven't came up with anything. It is an m.r.p. I can read the imprint on the windshield just don't know which model it is.

.

1st Does anyone remember who made the chassis brace and second do you remember what the yellow object was for

HowardH wrote:....and second do you remember what the yellow object was for

The yellow device was from Cobra and called a Battery Bug. It was a device to keep the battery discharged back when we thought that was a good idea

.

Does anyone know who made those wheels?
Thanks in advance

.

"Keil" made the wheels

Hey guys, Just scored a small lot of 12th scale cars/parts, I have no knowledge of 12th scale and or on-road stuff really.

Was told it is a Delta? If so what model?
Only pic right now from original owner.

Thanks
Dave

dave00beer wrote: ↑Mon Mar 06, 2017 4:42 pm Hey guys, Just scored a small lot of 12th scale cars/parts, I have no knowledge of 12th scale and or on-road stuff really.

Was told it is a Delta? If so what model?
Only pic right now from original owner.

Thanks
Dave

Well Dave, if this was facebook there would be about a dozen "bolink" references to that picture right now( ) but personally I don't know much about the pan car stuff either so hopefully one of the pan car guys will chime in. Looks cool though

Todd

HowardH wrote: ↑Mon Mar 06, 2017 9:52 am 1st Does anyone remember who made the chassis brace

I had a chassis brace like that on a car I sold long ago on here and I was told it was HPI but I could never find anything like it searching thru the HPI stuff or in their support parts. What car is it on?

Todd

This is on a rc10l ss

mytimac wrote: ↑Sun Feb 12, 2017 2:55 pm Had these sitting for over 3 years and take occasionally internet searches to identify without success.
Race Prep Fox Drive bone replacements. But I have no clue what the Fox Drive is and what used it. Anyone have good answer. I got them many years ago with bunch of Associated RC10 stuff. But I am skeptical on the RC10 unless the Fox Drive is for RC10.

My bet is that they actually fit the aftermarket drive system for the Tamiya Fox. If you ask a couple of those ebay guys trying to sell all that Thorp overstock with re-re header cards to measure one of theirs pin to pin, you might have a match.(search Fox Thorp Dogbones on ebay). Race Prep was mostly motors but the industry was still incestuous enough that it might be the answer.

dave00beer wrote: ↑Mon Mar 06, 2017 4:42 pm Was told it is a Delta? If so what model?

It is. P12 Spyder

HowardH wrote: ↑Mon Mar 06, 2017 8:24 pm This is on a rc10l ss

I want to say it's GPM but I'm not 100% on it.