Page 296 of 357
Re: The Official "What is it?" Thread
Posted: Tue Sep 14, 2021 9:30 pm
by Burniefloyd
Soooo... While impatiently waiting for parts for my Optima from Pargu and screws etc from China I decided to kill some time on eBay.
Well too fill the void I picked this up but it's coming from Thailand so the void will continue waiting.
Does anyone recognize the chassis? Seems to be a buggy that may have wanted to be a truck at some point. I thought it might be Andy's at first but it looks like it might be fiberglass? I spy some Andy's arms and maybe a JG front mount?
Re: The Official "What is it?" Thread
Posted: Tue Sep 14, 2021 9:42 pm
by juicedcoupe
Composite Craft or similar chassis with Andy's arms and a truck conversion (mostly).
The front axles look long. Possibly Team Crp axles for use with Tamiya truck wheels.
I have a buggy with many of the same parts.
https://www.rc10talk.com/viewtopic.php?f=35&t=46245
Re: The Official "What is it?" Thread
Posted: Tue Sep 14, 2021 10:04 pm
by Burniefloyd
Ya, I was thinking "or similar" as the holes and material don't seem to match up with anything else I have found so far.
I guess the next question is does she want to be a truck or a buggy? I've got time to think about it but I don't have a 10T so maybe...
Re: The Official "What is it?" Thread
Posted: Tue Sep 14, 2021 10:43 pm
by juicedcoupe
It looks to be setup for Tamiya Blackfoot wheels. I'm not sure how the track width will pan out with those arms.
And the gear ratio of the six gear transmission isn't really suited for tall tires.
In any case, it would be far from a 10T.
Re: The Official "What is it?" Thread
Posted: Wed Sep 15, 2021 8:43 am
by Phin
Burniefloyd wrote: ↑Tue Sep 14, 2021 10:04 pm
Ya, I was thinking "or similar" as the holes and material don't seem to match up with anything else I have found so far.
I guess the next question is does she want to be a truck or a buggy? I've got time to think about it but I don't have a 10T so maybe...
I can't offer a positive ID of the manufacturer, but I also don't think it's a CC chassis. Front axles, and rear hubs are Andy's parts meant for Tamiya style wheels.
Build it as a period correct heavy metal class monster truck with a body that looks like it's levitating over the chassis. Don't cut the front for longer 10T arms, and don't drill it for a stealth trans.
Re: The Official "What is it?" Thread
Posted: Wed Sep 15, 2021 1:41 pm
by Burniefloyd
Thanks Phin. I don't think my skill set is at the cut chassis with confidence level yet. I will probably clean it up the best I can and replace anything terribly worn. Too bad it September and all the best whitening sun is gone but we'll see what we can do.
Re: The Official "What is it?" Thread
Posted: Wed Sep 15, 2021 8:24 pm
by XLR8
juicedcoupe wrote: ↑Tue Sep 14, 2021 10:43 pm
...
And the gear ratio of the six gear transmission isn't really suited for tall tires.
...
This comment is of particular interest since I'm currently building an RC10 based monster truck.
So I'm wondering, what is the internal gear ratio for the first generation stadium truck produced by AE - did these large tire trucks ever include a 6 gear trans (1.83:1)?? If so, then did they include the standard 54 tooth spur gear or were they fitted with something larger?
Thanks!!
Re: The Official "What is it?" Thread
Posted: Wed Sep 15, 2021 9:48 pm
by juicedcoupe
The first 10T trucks had the 2.25 Stealth. The six gear was never used in a truck from AE.
I used to have a truck with a six gear. I was able to get a 90T (48P) spur gear in, with a slightly tweaked T2 gear cover.
I think 84 or 87 was the largest that would fit the standard cover, and 81 in a RPM cover. I believe that the Stealth and six gear have slightly different gear placement, allowing the Stealth more room.
Re: The Official "What is it?" Thread
Posted: Wed Sep 15, 2021 11:01 pm
by XLR8
juicedcoupe wrote: ↑Wed Sep 15, 2021 9:48 pm
The first 10T trucks had the 2.25 Stealth. The six gear was never used in a truck from AE.
I used to have a truck with a six gear. I was able to get a 90T (48P) spur gear in, with a slightly tweaked T2 gear cover.
I think 84 or 87 was the largest that would fit the standard cover, and 81 in a RPM cover. I believe that the Stealth and six gear have slightly different gear placement, allowing the Stealth more room.
Thanks.
I used to have a 90t spur and I may still have it but I'm not sure I will have a cover that will fit it. I think I ran that spur on the 10L bitd.
Anyway, good info -- thanks again.
Re: The Official "What is it?" Thread
Posted: Thu Sep 16, 2021 11:21 am
by JosephS
Burniefloyd wrote: ↑Tue Sep 14, 2021 9:30 pm
Soooo... While impatiently waiting for parts for my Optima from Pargu and screws etc from China I decided to kill some time on eBay.
Well too fill the void I picked this up but it's coming from Thailand so the void will continue waiting.
Does anyone recognize the chassis? Seems to be a buggy that may have wanted to be a truck at some point. I thought it might be Andy's at first but it looks like it might be fiberglass? I spy some Andy's arms and maybe a JG front mount?
Screenshot_20210914-204426.png
Screenshot_20210914-204505.png
Oh congrats on that one. I was talking with the seller but couldn't get the price I was looking for.
Re: The Official "What is it?" Thread
Posted: Mon Sep 27, 2021 6:28 am
by Retro rc
Ok guys need some help on this esc, originally had blue heat shrink on it,
Cheers adrian
Re: The Official "What is it?" Thread
Posted: Tue Sep 28, 2021 8:52 pm
by CrazyRC
Re: The Official "What is it?" Thread
Posted: Tue Sep 28, 2021 11:06 pm
by JK Racing
Not a guru - no idea what it is, but Mantua keeps popping in my head for some reason... Please, smarter people, chime in...
Re: The Official "What is it?" Thread
Posted: Tue Sep 28, 2021 11:24 pm
by GoMachV
Sankyo Siguma Ace I believe
Re: The Official "What is it?" Thread
Posted: Wed Sep 29, 2021 12:31 am
by CrazyRC
That's it! Seeing how much is missing, and impossible to find, the price is too much I think. Although... with a Frog transmission and rear suspension setup...
