RC10Talk - The Net's Largest Vintage R/C Community

The Baja Bug is now sold out.

Chevy Cheetah is now sold out
1/12th Greenwood Vette is rapidly selling through as well.

Any more 1/12 Bolink Cheetah bodies being made? Also do you have a mold to do a repo on the Jerobee Cheetah?

Hi,

At this time no. We did this at the first plant over a year ago now. They will be in the works when we figure out a better solution for production. Should be later this year I hope. As for the Jerobee question, it looks to actually be the same mold from what I can tell. Just they switched out the hood scoop area. It can be replaced with other designs. But who knows what happened to the Jerobee piece that would have gone in there.

The RC10 Mirage (Scoopless version) body is down to 2 remaining.
The Andys RC10T Bodies are down to 4 remaining. (these have errors)
Yokomo 870c is basically sold out except for 4 with really bad string of something on mold during production. Those will go on eBay CHEAP.
Yokomo Works is down to 6 remaining. (these have errors)

As stated in early post on the Cheetah, their will not be any new ones made for a while until we get a new production solution sorted out.

The ProTech is now the only Yokomo body left. There is about 5 of those left now.
I was wrong about Mirage quantity, found some more in a box. We have 8 remaining now.

The Andys RC10T Toyota ST Bodies are now sold out.

Will you be pulling anymore Yokomo bodies anytime?

Which one you looking for?

Peakey wrote: ↑Fri Nov 10, 2017 7:47 pm Will you be pulling anymore Yokomo bodies anytime?

Plan currently is after first of year.
But I do have one of the old Protech mistakes from the other plant sitting some place.

Watch our new videos on Youtube to see a few of the newest bodies.
https://www.youtube.com/channel/UCuPjDjIHrQd9SHkPoCKZJkQ

We are also starting to include window masks with many of the buggy bodies. I haven't decided what to do on the 12th scale bodies yet. Some of those windows are pretty complex with curves and may just leave them up to buyer. I really don't want to have to hold peoples hand on how to apply complex masks on curved windows and then get blamed for poor results.

Check the store for a lot of the newest bodies.
http://sabulatech.com/storefront/index.php?id_category=76&controller=category

Also have some not on store listed on eBay.
http://stores.ebay.com/sabulatech

It is a real struggle to keep inventory between the 2 correct and most usually sell through eBay. So they may not always show the same thing. Lately the bodies sell so quick from eBay I might put them up there first before they even go on main store. If you see one on eBay and like to buy from store please let me know.

Bunch of new bodies just added. Also if you buy more than 1 body you get 10% off your bodies. Any 2 bodies, doesn't have to be same body.
12th Scale
http://sabulatech.com/storefront/index.php?id_category=35171&controller=category

Off-Road
http://sabulatech.com/storefront/index.php?id_category=78&controller=category

We are just moving over to Off-road bodies now. Will go back to some 12th scale once they get holes filled and cracks repaired. If you watched some of our videos you know some molds have issues in how they got made back in the day.

Yokomo Body/Trays are done and on store now. Bodies for 870c and Werks/Works. Pictures are the old pictures from last run. Will get some updated ones soon. Also working on window masks for at least the Werks.
https://www.youtube.com/watch?v=lNyknMgrzW0

http://sabulatech.com/storefront/index.php?id_product=4118&controller=product
http://sabulatech.com/storefront/index.php?id_product=4122&controller=product

Did another run yesterday.
https://www.youtube.com/watch?v=izDYJNd6A48
See latest NEW stuff on store.
http://sabulatech.com/storefront/index.php?controller=new-products

4 more run yesterday. Team Losi JRXT, Dekon Monza, Yokomo 834B, and Baja Bug.
https://www.youtube.com/watch?v=2t-d51qV3io

Any Parma eagle body’s in the future?