RC10Talk - The Net's Largest Vintage R/C Community

MarkyDents wrote: ↑Thu Jul 25, 2024 1:22 am

Frankentruck wrote: ↑Wed Jul 24, 2024 9:44 pm Frog, Blackfoot, Monster Beetle. Is Frog a gray chassis, and BF and MB are red? Other than chassis color, are the chassis the same?

My favorite out of all of them is the blue one from the Bush Devil
IMG_0384.jpeg

Totally forgot about the "Bush Devil"

That should be the name of a hair trimmer or a porn actor........

cjack wrote: ↑Mon Sep 09, 2024 7:15 pm Can anyone identify the wheels these aluminum adapters fit? Thanks

Here's a close up of the inner hub assembly. Does this "NSK TORR FC-4K" help with identification? I'm clueless about these 4WD locking hubs. Thanks again.

NSK is a bearing manufacturer.

Frankentruck wrote: ↑Wed Sep 11, 2024 1:35 pm NSK is a bearing manufacturer.

Haha... you are correct. I'm a bit slow these days. That isjust the brand & model of bearing used in the assembly. The search continues...

Does anyone know the difference in Tamiya lightweight kingpins #53141 versus #53157.

I am thinking about repairs/upgrades for Tamiya Manta Ray, and both of the items above look like they would work?


Thanks!

dldiaz wrote: ↑Thu Sep 12, 2024 9:25 pm Does anyone know the difference in Tamiya lightweight kingpins #53141 versus #53157.

I am thinking about repairs/upgrades for Tamiya Manta Ray, and both of the items above look like they would work?


Thanks!

They are a different length to each other....

The one you want is the 53141, slightly longer at 4 x 11.5mm, and standard on TL01s and Manta Rays https://tamiyabase.com/parts/1606-53141

The other is shorter at 4 x 10mm, and suits M01 / M02 Minis, TA03s, and a variety of other cars https://tamiyabase.com/parts/1622-53157

Don't ask me why Tamiya did that.... it's fairly annoying that they chop and change back and forth.

Alex

Incredible_Serious wrote: ↑Thu Sep 12, 2024 9:38 pm
They are a different length to each other....

The one you want is the 53141, slightly longer at 4 x 11.5mm, and standard on TL01s and Manta Rays https://tamiyabase.com/parts/1606-53141

The other is shorter at 4 x 10mm, and suits M01 / M02 Minis, TA03s, and a variety of other cars https://tamiyabase.com/parts/1622-53157

Don't ask me why Tamiya did that.... it's fairly annoying that they chop and change back and forth.

Alex

Awesome, Thank You!

Hi everyone,

I don't know what are those parts, help.




Jerome

Is this a 2 speed transmission? Referring to the double pinion/spur gear. I just dug out the old original RC10DS that we got back in the late 90s, this doesn't match what's shown in the manual, and I haven't even seen this car in 20+ years. I vaguely remember something along the lines of some kind of automatic shift based on ground speed, or RPM, or something...The old Ni-Cd packs are completely shot, so I can't test it just yet.

That is an HPI 2 speed for Associated cars. It relies on centrifical force to throw out pawls that engage 2nd gear. You can adjust how early or late it shifts by adjusting spring tension on the pawls. I'm sure you can find instructions online.

Trass wrote: ↑Sat Sep 14, 2024 5:39 am Hi everyone,

I don't know what are those parts, help.




Jerome

Jerome,

The black parts are Tamiya Technigold brush spreaders, and the silver part looks very similar to the headlight mount for the Tamiya Porsche 959.

Alex

Trass wrote: ↑Sat Sep 14, 2024 5:39 am Hi everyone,

I don't know what are those parts, help.




Jerome

The two plastic bits are brush replacement tools for Tamiya technigold ( probably spelt wrong ) race motors , someone is bound to chime in with the exact model motors , hard to find ! Or technipower motors ?

So everything says RC300 to me, except the front "suspension." Was this an AE thing, or aftermarket

RC150 and RC200 used that front end iirc

GoMachV wrote: ↑Mon Sep 16, 2024 9:06 pm RC150 and RC200 used that front end iirc

I always forget about those!! I think you nailed it. For some reason, I only think of 300s and 500s.