Page 5 of 7
Re: Advanced Racing Products RC10 Mid
Posted: Sat Sep 26, 2015 3:17 pm
by yellowdatsun
First, you do ridiculously awesome work, amazing stuff. So, don't take this the wrong way.......Instead of saving weight by drilling a bunch of circles, I'd do it with triangle type shapes like on the re-release rear shock tower, or there are other shapes that would work if you look at other various RC bits. The circles just look, well, kinda cheap.
Re: Advanced Racing Products RC10 Mid
Posted: Sat Sep 26, 2015 3:43 pm
by durb69
This was a reproduction of a design that was not mine. So the circles where just the design of the original. I just made minor modifications to the parts to except a stealth transmission if people want to use one they can. But thank you for the compliment. If it was my design it would have crazy cutouts instead of holes lol.
Re: Advanced Racing Products RC10 Mid
Posted: Fri Oct 02, 2015 5:49 pm
by fredswain
The chassis sheet stock is on order. It's going to be about 3 weeks out for completion. If anyone wants one, pm me. I've kept the quantity low.
Re: Advanced Racing Products RC10 Mid
Posted: Tue Oct 02, 2018 2:33 am
by SHY
Hi guys!
Bit late to the table here... but is it possible to buy a kit? (chassis also)
I actually got hold of an original ARP kit on ebay/US but I sold it on to my friend LurkingCAT who has been dreaming about one for ages.
Now however I'd like to race with a clone
Re: Advanced Racing Products RC10 Mid
Posted: Tue Oct 02, 2018 2:51 am
by GoMachV
derrick doesnt come around much, but is active on Facebook. Ill see if I can get his attention
Re: Advanced Racing Products RC10 Mid
Posted: Tue Oct 02, 2018 5:17 am
by SHY
Thx Jeff!
I was just thinking maybe I should ask on Facebook
Re: Advanced Racing Products RC10 Mid
Posted: Tue Oct 02, 2018 10:11 am
by GoMachV
He replied to my message and said he doesn’t have any left
might need to post up a wanted post on Old School as well (if you haven’t already) as I think that’s where most of them were sold
Re: Advanced Racing Products RC10 Mid
Posted: Wed Oct 03, 2018 3:57 am
by SHY
My thoughts exactly!
Re: Advanced Racing Products RC10 Mid
Posted: Wed Oct 03, 2018 12:37 pm
by fredswain
SHY wrote: ↑Tue Oct 02, 2018 2:33 am
Hi guys!
Bit late to the table here... but is it possible to buy a kit? (chassis also)
I actually got hold of an original ARP kit on ebay/US but I sold it on to my friend LurkingCAT who has been dreaming about one for ages.
Now however I'd like to race with a clone
I think I only made 8 or 9 chassis. It was expensive and everyone kept having custom requests to change things. It was too much of a hassle and I'll never do it again. A flat chassis could be made by someone that would allow the stock nose to be bolted on. Derrick might be able to machine more parts again but there's not much incentive in making just one.
Re: Advanced Racing Products RC10 Mid
Posted: Wed Oct 03, 2018 1:48 pm
by GoMachV
His reply that he was taking a break from machining so it may be a while
Re: Advanced Racing Products RC10 Mid
Posted: Wed Oct 03, 2018 5:42 pm
by Timmahhh
fredswain wrote: ↑Wed Oct 03, 2018 12:37 pm
SHY wrote: ↑Tue Oct 02, 2018 2:33 am
Hi guys!
Bit late to the table here... but is it possible to buy a kit? (chassis also)
I actually got hold of an original ARP kit on ebay/US but I sold it on to my friend LurkingCAT who has been dreaming about one for ages.
Now however I'd like to race with a clone
I think I only made 8 or 9 chassis. It was expensive and everyone kept having custom requests to change things. It was too much of a hassle and I'll never do it again. A flat chassis could be made by someone that would allow the stock nose to be bolted on. Derrick might be able to machine more parts again but there's not much incentive in making just one.
I have a flat chassis version, which works out well because I'm building a DS from it. I haven't seen any with kick up around recently.
Re: Advanced Racing Products RC10 Mid
Posted: Fri Dec 07, 2018 12:08 am
by durb69
Hi guys! I came back after a long time away! Good too see the interested people! I have taken a break from making parts for a while. Send messages about parts for this build too
[email protected] and we can talk about parts you might need. I might make a few things per request if you need something. Let me know.
Thanks
Derrick
Re: Advanced Racing Products RC10 Mid
Posted: Tue Jan 04, 2022 7:59 am
by SHY
Patience... two years ago I found another kit on ebay/US, sent it to my friend's mother in Connecticut... and she misplaced it... This Christmas I finally got it sent to Norway!
Now! Some questions:
-Do I need a custom motor plate or will std fit?
-Will the Worlds gearbox fit?
Re: Advanced Racing Products RC10 Mid
Posted: Tue Jan 04, 2022 8:34 am
by Phin
SHY wrote: ↑Tue Jan 04, 2022 7:59 am
Patience... two years ago I found another kit on ebay/US, sent it to my friend's mother in Connecticut... and she misplaced it... This Christmas I finally got it sent to Norway!
Now! Some questions:
-Do I need a custom motor plate or will std fit?
-Will the Worlds gearbox fit?
The aluminum rear bulkhead can't be used with a stealth transmission because the upper brace doesn't have the holes to mount to the top of the transmission.
Re: Advanced Racing Products RC10 Mid
Posted: Tue Jan 04, 2022 8:54 am
by SHY
Thx! So it's the 6-gear tranny or a MIP tranny? Or Factory Works?
Edit:
-Factory Works does not fit
-MIP is veeeery expensive
-I guess it's the 6-gear then