Page 5 of 30
Re: NIX91 Questions and Answers
Posted: Sun Sep 21, 2014 5:43 pm
by m_vice
Re: NIX91 Questions and Answers
Posted: Sun Sep 21, 2014 8:25 pm
by slow_jun
Seabass wrote:Unfortunately I do not have a "racer kit" so to speak. I sure wish I could accommodate everyone but it is just not feasible since I am doing all the kit work by myself and time is not exactly on my side since I also have a normal day job as well.
The race parts will follow shortly since I am finishing up the final kits now.
Jake
No problem Jake, Thanks a lot for taking the time to do this Kit for everyone to have .
Re: NIX91 Questions and Answers
Posted: Mon Sep 22, 2014 4:51 am
by tiger1
Hi:
What was the meaning of (on the other URL
http://www.rc10talk.com/viewtopic.php?f=99&t=36418 ): "CNCRC-004 - Aluminum Chassis Stand Off (4pcs) (
Non-tapered)"
Non-
tapered? Non-
tapped?? Or it meant the posts are straight sided??
Please advise.
Thanks in advance
Re: NIX91 Questions and Answers
Posted: Mon Sep 22, 2014 10:14 am
by Seabass
The stand off are tapped 4-40 top and bottom. The standoffs do not have a taper machined into them meaning they are straight sided. The original car had tapered chassis standoffs which can easily be done in a lathe. I did not do the machine work on the taper simply because if the time it takes and the quantity I needed.
Jake
Re: NIX91 Questions and Answers
Posted: Mon Sep 22, 2014 10:29 am
by tiger1
thanks Seabass
Re: NIX91 Questions and Answers
Posted: Tue Sep 23, 2014 11:14 pm
by Seabass
Guys I ordered enough small pattern nuts to include in every kit to correct the minor issue we identified with the SLS steering bell cranks.
Jake
Re: NIX91 Questions and Answers
Posted: Wed Sep 24, 2014 8:29 am
by tiger1
Seabass: you could be my son-in-law!!!
Re: NIX91 Questions and Answers
Posted: Wed Sep 24, 2014 8:41 am
by slotcarrod
Re: NIX91 Questions and Answers
Posted: Wed Sep 24, 2014 9:52 am
by Seabass
Rod you are hilarious....
Re: NIX91 Questions and Answers
Posted: Wed Sep 24, 2014 11:59 am
by askbob
Re: NIX91 Questions and Answers
Posted: Wed Sep 24, 2014 8:03 pm
by Mark Westerfield
Since the original had 30 degrees of chassis kickup, will there be a 2nd chassis and bulkhead for the Nix91 with 30 degree in the future?
And will I get a nice Nixconcepts stickers to run on my car with my parts and chassis kit?
Re: NIX91 Questions and Answers
Posted: Wed Sep 24, 2014 8:31 pm
by badhoopty
wow... what a nice thing to come back to the board after another leave of absence. this is rad.
Re: NIX91 Questions and Answers
Posted: Wed Sep 24, 2014 9:43 pm
by Seabass
Undecided on the other chassis and bulkhead right now, it is a possibility.
Jake
Re: NIX91 Questions and Answers
Posted: Thu Sep 25, 2014 2:41 am
by JPAE07
badhoopty wrote:wow... what a nice thing to come back to the board after another leave of absence. this is rad.
X 2
Re: NIX91 Questions and Answers
Posted: Thu Sep 25, 2014 3:31 am
by Niki
Mark Westerfield wrote:And will I get a nice Nixconcepts stickers to run on my car with my parts and chassis kit?
Sorry, I can offer only DIY version of my pancar project stickers...
https://dl.dropboxusercontent.com/u/31381524/NIXconcepts_NIX10LC_600dpi_A4.jpg
I would send pics of her to Jake now!