Parts organization/storage?
-
- Approved Member
- Posts: 1998
- Joined: Fri Feb 16, 2007 10:09 pm
- Location: Upstate NY
- Been thanked: 12 times
Parts organization/storage?
What does everybody do to keep their stuff organized? I know some of you have a ton of parts, how do you keep it all straight so you can find what you are looking for? Who's got the most organized parts system?
I had been just putting stuff in kit boxes on the shelf, but have switched over to rubbermaid type containers to avoid damaging the boxes.
My wife makes fun of how many tackle boxes I have for all the loose hardware. you can never have enough storage.
I got ahold of her label maker one day and went nuts on the boxes
Pics to follow.
I had been just putting stuff in kit boxes on the shelf, but have switched over to rubbermaid type containers to avoid damaging the boxes.
My wife makes fun of how many tackle boxes I have for all the loose hardware. you can never have enough storage.
I got ahold of her label maker one day and went nuts on the boxes
Pics to follow.
- Halgar
- Approved Member
- Posts: 3321
- Joined: Tue Feb 07, 2006 12:34 pm
- Location: USA
- Has thanked: 150 times
- Been thanked: 191 times
Re: Parts organization/storage?
My main toolbox has several organizer trays for nuts, bolts and the like. Other than that, I've got two fairly large totes with all my gear in it.
klavy69 wrote:... when I give you s&#t its a loan...I want it back!
- MOmo
- Approved Member
- Posts: 676
- Joined: Thu Jan 18, 2007 4:32 pm
- Location: Portland OR.
- Been thanked: 1 time
Re: Parts organization/storage?
Most of my vintage parts are in a couple of small rubbermaid bins. The cars are in boxes for now, until I can organize.
Eventually, once my workbench is complete, I'll likely hang many of my cars up, and perhaps the parts too. More than likely I will put them in one of my vintage boxes up on a shelf.
MOmo
Eventually, once my workbench is complete, I'll likely hang many of my cars up, and perhaps the parts too. More than likely I will put them in one of my vintage boxes up on a shelf.
MOmo
Re: Parts organization/storage?
This has been a problem for me too. I have several sectioned plastic bins of varying sizes, some small clear plastic rubbermaid totes and, unfortunately some parts are in shoe boxes. I put radios and chargers in an old kit box. Eventually it would be nice to have everything sorted by brand, part type, size or part number, but I know that won't happen unless I get some more room to work in.
Gary
- RichieRich
- Approved Member
- Posts: 2352
- Joined: Wed Jun 14, 2006 11:42 pm
- Location: Los Angeles, CA
- Has thanked: 34 times
- Been thanked: 19 times
Re: Parts organization/storage?
I keep stuff in bins. But, for stuff I access regularly, I use this:
http://www.stanleytools.com/default.asp?CATEGORY=ZAG+ORGANIZERS&TYPE=PRODUCT&PARTNUMBER=014166R&SDesc=Stanley%26%23174%3B+Double+Sided+Tool+Organizer
There's another one I use too but I can't find a pic. It's a little smaller than the Stanley one.
http://www.stanleytools.com/default.asp?CATEGORY=ZAG+ORGANIZERS&TYPE=PRODUCT&PARTNUMBER=014166R&SDesc=Stanley%26%23174%3B+Double+Sided+Tool+Organizer
There's another one I use too but I can't find a pic. It's a little smaller than the Stanley one.
-
- Approved Member
- Posts: 1998
- Joined: Fri Feb 16, 2007 10:09 pm
- Location: Upstate NY
- Been thanked: 12 times
Re: Parts organization/storage?
alright, so you guys failed to make me feel normal, non-OCD
I've gotten a little organized with my small parts and hardware,
I got a 40% off flyer from one of the places I buy bulk hardware from this winter and stocked up. The new hardware bin is all separated by size, Once I did that I was no longer happy with the big bin-o-screws that was only loosely organized by fh/bh/cap head and did the same with every last used screw collated from several locations. Once that was done it seemed a shame to have bearings all floating around in one drawer, trying to figure out which were standard and which metric, so those got the same treatment, with room leftover for some other parts. used bearings are loose in the slot, new in tubes/bags. I know the bushings and aluminum screws are all mixed up, but I have so few of those it is hard to justify another container, at least for now. (I did separate metric/sae and flanged bushings though) I keep all of my parts bins on a rack next to my workbench with lots of rubbermaid type tubs for paint, supplies and parts. My wife and kids fed into the ocd over the winter by getting me a gander mountain tackle bag, it holds 6 of the full size tackle boxes, plus one medium, so I can take what I need when I go to the track without having to clean out a single big box. Not all of the parts bins are as well organized or labeled, most look kind of like this:
I've gotten a little organized with my small parts and hardware,
I got a 40% off flyer from one of the places I buy bulk hardware from this winter and stocked up. The new hardware bin is all separated by size, Once I did that I was no longer happy with the big bin-o-screws that was only loosely organized by fh/bh/cap head and did the same with every last used screw collated from several locations. Once that was done it seemed a shame to have bearings all floating around in one drawer, trying to figure out which were standard and which metric, so those got the same treatment, with room leftover for some other parts. used bearings are loose in the slot, new in tubes/bags. I know the bushings and aluminum screws are all mixed up, but I have so few of those it is hard to justify another container, at least for now. (I did separate metric/sae and flanged bushings though) I keep all of my parts bins on a rack next to my workbench with lots of rubbermaid type tubs for paint, supplies and parts. My wife and kids fed into the ocd over the winter by getting me a gander mountain tackle bag, it holds 6 of the full size tackle boxes, plus one medium, so I can take what I need when I go to the track without having to clean out a single big box. Not all of the parts bins are as well organized or labeled, most look kind of like this:
- Hay Burner
- Approved Member
- Posts: 37
- Joined: Mon Jul 07, 2008 9:43 pm
- Location: Bedford Texas Y'ALL
Re: Parts organization/storage?
I have a few small totes for parts too big to fit in the organizers that hold the small parts. A couple big totes for tires and such. I don't know why they call them organizers I still rifle through a couple before I find what I want
Cleverly disguised as a responsible adult
The older I get the faster I was
The older I get the faster I was
-
- Approved Member
- Posts: 1998
- Joined: Fri Feb 16, 2007 10:09 pm
- Location: Upstate NY
- Been thanked: 12 times
Re: Parts organization/storage?
Then there are the NIP parts,
I have mainly old losi stuff, which is organized into 2 bins. The one shown is the smaller of the 2. it has all aftemarket parts. I have them in ziplocks separated by manufacturer, with 2 bags of random parts from smaller companies. Most of what is left in the bin is RPM, those are separated by part type since there are too many to just put them all in one bag. I have a bigger tote with OEM losi parts, it has 4 smaller totes inside, most having sandwich size ziplocks lined up with different parts. one bin for drivetrain, one for suspension, one for hardware, and one for lexan and body accessories(wings, dirt shield, wheel covers wing wire) Tires and bodies are separated into a few totes the size of the one above based on size/type.
Stickers and manuals are in 3-ring binders inside heavy duty page protectors
Even the radios are organized into 3 (recycled)boxes, one each for 27mhz, 75mhz and 2.4ghz
Hopefully this has given some of you some organizing ideas, or at least a good "see honey, I'm not That bad" post to show the wife
I have mainly old losi stuff, which is organized into 2 bins. The one shown is the smaller of the 2. it has all aftemarket parts. I have them in ziplocks separated by manufacturer, with 2 bags of random parts from smaller companies. Most of what is left in the bin is RPM, those are separated by part type since there are too many to just put them all in one bag. I have a bigger tote with OEM losi parts, it has 4 smaller totes inside, most having sandwich size ziplocks lined up with different parts. one bin for drivetrain, one for suspension, one for hardware, and one for lexan and body accessories(wings, dirt shield, wheel covers wing wire) Tires and bodies are separated into a few totes the size of the one above based on size/type.
Stickers and manuals are in 3-ring binders inside heavy duty page protectors
Even the radios are organized into 3 (recycled)boxes, one each for 27mhz, 75mhz and 2.4ghz
Hopefully this has given some of you some organizing ideas, or at least a good "see honey, I'm not That bad" post to show the wife
- scr8p
- Administrator
- Posts: 16540
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 976 times
Re: Parts organization/storage?
anthony, if you took all of your parts/screws and dumped them all over you work benches and the floor, that would be about how well my hobby area is organized.
anytime you want to take a trip down to my house armed with containers and ziploc bags and organize my stuff, feel free. i wouldn't stop you...... and neither would my wife.
anytime you want to take a trip down to my house armed with containers and ziploc bags and organize my stuff, feel free. i wouldn't stop you...... and neither would my wife.
- bearrickster
- Approved Member
- Posts: 4375
- Joined: Thu Mar 06, 2008 11:36 am
- Location: Hollywood Maryland
- Been thanked: 5 times
Re: Parts organization/storage?
I keep all of my parts in those bins also but I am still finishing my Hobby room when I am done I will be completly ocd with kitchen cabanets to boot so I can hide my OCD I cant stand knowing I own a part I cant find?
- Hay Burner
- Approved Member
- Posts: 37
- Joined: Mon Jul 07, 2008 9:43 pm
- Location: Bedford Texas Y'ALL
Re: Parts organization/storage?
I wish I could be that organized, but I really think that if I did reach that level of organization it maybe considered one of the seven signs
Cleverly disguised as a responsible adult
The older I get the faster I was
The older I get the faster I was
- Halgar
- Approved Member
- Posts: 3321
- Joined: Tue Feb 07, 2006 12:34 pm
- Location: USA
- Has thanked: 150 times
- Been thanked: 191 times
Re: Parts organization/storage?
No kidding. I used to be fairly organized, even when things were astray, I could still tell you exactly where everything is. Now I subscribe more to "everything has it's place, and everything is all over the place." I'm lucky to find my arse with both hands anymore.Hay Burner wrote:I wish I could be that organized, but I really think that if I did reach that level of organization it maybe considered one of the seven signs
klavy69 wrote:... when I give you s&#t its a loan...I want it back!
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8 Replies
- 890 Views
-
Last post by Frankentruck
-
- 13 Replies
- 1283 Views
-
Last post by littleVETTE
-
- 14 Replies
- 1582 Views
-
Last post by JosephS
-
- 7 Replies
- 1769 Views
-
Last post by SmallScaleSmitty
-
- 15 Replies
- 2588 Views
-
Last post by 1911Colt
-
- 1 Replies
- 748 Views
-
Last post by klavy69
-
- 32 Replies
- 5052 Views
-
Last post by uniquenamehere
-
- 1 Replies
- 740 Views
-
Last post by kaiser
Who is online
Users browsing this forum: Amazon [Bot], Facebook [Bot], R6cowboy and 9 guests