RC10Talk - The Net's Largest Vintage R/C Community

Sorry bngilies but they did fit and they do look good to....



Teamline hubs ballraced, mip cvds and 3racing alu rear hubs have the blue steering but has not been mounted yet...

mvh Isobarik

If you used them in the front like I think it shows, and they fit well. Should be able to fit them on a wide range of K-cars!! Cool.

Yeah they fit really well and they did have an inferno 10 kit also and those are similar to w5061
so you can take the pro-x axel and fit with the inferno bone and then you will have an cvd with pin hex like modern kyosho.

mvh isobarik

Have fitted law30 clampon wheel hubs and tr-15 yellow wheels almost forgot blue steering


mvh Isobarik

How wide does that bring it out to isobarik? Looks good!

Id like to build my zxr as a racer but worried bout replace of broken parts seein this rig has me thinkn about doin it. i like the use of newer parts. this build is lookn good.

adam lancia wrote:How wide does that bring it out to isobarik? Looks good!

Actually i doesent make the car wider the rims from tr15 is exactly the same as original wheels regarding offset but much more good looking ofcourse. Clamp on wheel hubs i have no numbers of measurement but i think it stays the same, the biggest different is when you have taken the axle out of the hub and are putting it together you dont have to hold the uj beacuse the hex is pinned and clamped to the axle.

mvh isobarik

Soncho Ponza wrote:Id like to build my zxr as a racer but worried bout replace of broken parts seein this rig has me thinkn about doin it. i like the use of newer parts. this build is lookn good.

Yeah parts dont grow on trees but they do show up and some is still avaliable from kyosho and there is coming new stuff also from an entusiast that is making his own parts . Hard to find items are rear belts, Lazer zxr bodys and spurgear cover.
pm me if you need any thing i have some stock and can point you in the right direction.

mvh Isobarik

just wanted to show you the running car....



i have bought the la118 so i can fit standard spurs and dont have to stick with kyosho stuff
The spur is avaliable from http://www.rwracing.co.uk and theay are machined and have the correct size 100t/48pitch

mvh Isobarik

If i just could find an zxr body for it .....
mvh Isobarik

Www.kamtec.co.uk will be selling one very shortly.

Kyosho Fan2 wrote:http://Www.kamtec.co.uk will be selling one very shortly.

yeah thanks to duplicating mine.....
but i would like to have it now or preferably yesterday....

mvh Isobarik

isobarik wrote: The spur is avaliable from http://www.rwracing.co.uk and theay are machined and have the correct size 100t/48pitch

I'm using a 90teeth spur on mine, but that's the metric 0.6 module; comes from Tamiya
(forgot which model, TA05 perhaps?)

I kind of like the 0.6 module since I have a couple pinions in this module to run on my ultima and optima mid, it's just a bit stronger than 48 pitch and much smoother than 32 pitch.

Got to post my new body.
Missing some stickker dough.



mvh Isobarik