Page 1 of 5
Matt Francis 1995 World Champs RC10B2 Replica Project
Posted: Sat Jul 04, 2009 4:23 pm
by kenooze
Yes, I'm in my Matt Francis period.
Don't worry, I have not forgoten the 1993 Kinwald replica, but due to some difficulties with the right Carbon fiber plate of the rear tower, and about the machined motor plate, I work on some extra project until the missing parts.
This is my starting documents for this project.
Re: Matt Francis 1995 World Champs RC10B2 Replica Project
Posted: Sat Jul 04, 2009 4:41 pm
by kenooze
Re: Matt Francis 1995 World Champs RC10B2 Replica Project
Posted: Sat Jul 04, 2009 4:52 pm
by kenooze
The Carbon fiber shock tower fit all needed to look at the Matt car, like they small locknuts on ball ends and other's.
The front end fit Lunsford titanium turnbuckles and aluminium wheel axle with again mini locknut on each balls
The assembled front end with titanium screws on the plastic upper front deck.
The front end fully assembled and ready to fit the chassis
Re: Matt Francis 1995 World Champs RC10B2 Replica Project
Posted: Sat Jul 04, 2009 4:55 pm
by kenooze
The rear end fit the original 2 holes rear arms and the 3° Toe-I, and 3° Anti Squat, with 0° Toe-In hubs, and Short wheel base with white spacer.
The MIP CVD's fit a rear Half right suspension.
Now, both half rear suspension fit the rear lower aluminium plate.
Re: Matt Francis 1995 World Champs RC10B2 Replica Project
Posted: Sat Jul 04, 2009 4:57 pm
by kenooze
Re: Matt Francis 1995 World Champs RC10B2 Replica Project
Posted: Sat Jul 04, 2009 5:01 pm
by kenooze
Yes I know, the B2 Pre-Production used during the World Champs fit the RC10 Tub Chassis Stealth Transmission.
I'm in research of the plastic parts linking the chassis to the top of the gear box.
So for the moment the car was build with a standard B2 gear box and motor plate.
Re: Matt Francis 1995 World Champs RC10B2 Replica Project
Posted: Sat Jul 04, 2009 5:05 pm
by kenooze
I also collect the right electronics equipment.
A Reedy Sonic.
And LRP ICS Speedo.
Re: Matt Francis 1995 World Champs RC10B2 Replica Project
Posted: Sat Jul 04, 2009 5:07 pm
by kenooze
Now they fit the car, before the next step, the shock process.
Re: Matt Francis 1995 World Champs RC10B2 Replica Project
Posted: Sun Jul 05, 2009 3:16 pm
by RC10resto
Very nice!
You make it look too easy
Re: Matt Francis 1995 World Champs RC10B2 Replica Project
Posted: Sun Jul 05, 2009 8:13 pm
by Diggley
Nice!
It's nice to see another B2 fan posting a clean build.
It's one of my favorites.
Re: Matt Francis 1995 World Champs RC10B2 Replica Project
Posted: Mon Jul 06, 2009 6:18 am
by Chewbacca
nice build,
looks like we have a Matt Francis fan club in the making, huh?
Re: Matt Francis 1995 World Champs RC10B2 Replica Project
Posted: Mon Jul 06, 2009 6:51 am
by kenooze
No, just a fanatic of the EP Off Road history and he's World Champs !
Re: Matt Francis 1995 World Champs RC10B2 Replica Project
Posted: Mon Jul 06, 2009 7:07 am
by dubfreak
nice build so fast on puting thing together great job so far cant wait to see the body and paintjob
Re: Matt Francis 1995 World Champs RC10B2 Replica Project
Posted: Thu Jul 09, 2009 12:46 pm
by Moggie XL
The B2 that you are building looks realy good but if you want to
build your car exactly like Matts worlds prototype car you will
need to fit an original stealth gear box because the B2 box wasn't
ready for the 95 worlds.
Re: Matt Francis 1995 World Champs RC10B2 Replica Project
Posted: Thu Jul 09, 2009 2:25 pm
by RC10resto
Yes I know, the B2 Pre-Production used during the World Champs fit the RC10 Tub Chassis Stealth Transmission.
I'm in research of the plastic parts linking the chassis to the top of the gear box.
So for the moment the car was build with a standard B2 gear box and motor plate.
read the sub-titles - Cedric has done the research, he is a master builder
