RC10Talk - The Net's Largest Vintage R/C Community

Got this one off craigslist for $50 !!! just a roller, had extra original rims and tires, those went on a car that had temporary ones. it has a aluminum steering bell crank, had a sway bar on the front but i took that and put it on my shelf gold pan that i got, stays in the box so the air dont hurt it anymore.

will post pics as i go through the resto process. ( got like 7 others im working on now, so lookfor my other posts!!!)

Enjoy!! ( i have more pics of this car, but they all didnt upload to photobucket)









last pic is of all the cars that im working with as of now, got lots more waiting for a resto!!!

Here's a pic of the bottom of the tub. will post resto pics and updates as i progress

heres some more pics of this car that i found on the computer. should start the tear down tommorow after work.
after having some electrics $50 i think.

well i havent ever got a chance to tear this one down yet,but i had put in some elctrics before and ran it around a few times.after that it sat for a while, i got some nicer electronics and a motor for this,i put them in and ran it, but the battery ran out fast, and the esc gets realy hot , so i think the gearing is wrong. so i might be starting the tear down tomorow after work. i know in the update for another car , i said id start the tear down and cleaning, but never got a chance,just got busy.i appologize for that!id like to start the tear down and clean up tommorow, theres a better sentence!

also i was using a 12tooth pinion and a 52 spur,6 gear trans, 1800 mah nicd batt,novak 410-M1c, and a motor that has the timing marks,it says "welcome to the machine"rpm 31,283 @5.0v. i dont think this gearing is rite or some thing. if any one has any advice, would be greatly appreciated.







pics suck, sorry!