Page 1 of 1
Front damper stay
Posted: Sat Feb 17, 2007 4:30 pm
by Brat
Hi guys, any ideas if there's a possibility to purchase the white translucent damper stay for RC10 with gold chassis? Or maybe the carbon fiber type. Please advise. I'm unable to locate any in Singapore.
Posted: Sat Feb 17, 2007 4:38 pm
by ra272
Posted: Sat Feb 17, 2007 4:38 pm
by templeofspeed
Posted: Sat Feb 17, 2007 4:41 pm
by ra272
Those parts (6 mounting holes each side) are for the RC10CE, if you have the older narrow arms version, you have to found the 2 holes version on ebay.
Posted: Sat Feb 17, 2007 4:43 pm
by Brat
Hmmm...mines a little diff. Its without the curvature at the top. Mines like '11' instead of 'U'. Hope you get what I mean.
Posted: Sat Feb 17, 2007 4:44 pm
by templeofspeed
ra272 wrote:Those parts (6 mounting holes each side) are for the RC10CE, if you have the older narrow arms version, you have to found the 2 holes version on ebay.
ok
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220081635162
or
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290083861868 
Posted: Sat Feb 17, 2007 4:47 pm
by Brat
Not these either. I think ra272 is right. Mines the CE..
Posted: Sat Feb 17, 2007 4:51 pm
by Brat
Thanks. That's the one! Anyway does AE selling it? Cos I dislike bidding...Otherwise, I'll have to order a piece of FRP from US and DIY myself cos I prefer black. Thought of ordering the front piece which the front wheel and steering ball end stays. sorry dunno what its called.
Posted: Sat Feb 17, 2007 5:00 pm
by templeofspeed
Brat wrote:Thanks. That's the one! Anyway does AE selling it? Cos I dislike bidding...Otherwise, I'll have to order a piece of FRP from US and DIY myself cos I prefer black. Thought of ordering the front piece which the front wheel and steering ball end stays. sorry dunno what its called.
The original <6010 tower is not available from Associated anymore.
qctires has this, you might PM him:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170082468100
I believe the other part you want is the steering knuckle. There are a few different types, offset axle (kingpin goes in front of the axle), inline axle, aluminum inline axle (kingpin goes
through the axle).
Posted: Sun Feb 18, 2007 2:50 am
by Brat
templeofspeed wrote:Brat wrote:Thanks. That's the one! Anyway does AE selling it? Cos I dislike bidding...Otherwise, I'll have to order a piece of FRP from US and DIY myself cos I prefer black. Thought of ordering the front piece which the front wheel and steering ball end stays. sorry dunno what its called.
The original <6010 tower is not available from Associated anymore.
qctires has this, you might PM him:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170082468100
I believe the other part you want is the steering knuckle. There are a few different types, offset axle (kingpin goes in front of the axle), inline axle, aluminum inline axle (kingpin goes
through the axle).
Yeah thats right! So, which would you recommend? Is it still available? Or should I just modify the chasiss to adapt B4 parts, including the swing arms etc? The problem with AE is that we do not have much parts support here...other than that, I find their products to be top notch!Any recommendation will be greatly appreciated!!!Hope to restore my rc10 within a month.
Posted: Sun Feb 18, 2007 4:50 am
by ra272
Both steering blocks (inline or trailing axle) are still available at Tower Hobbies but only in the new stiffer black plastic.
Posted: Sun Feb 18, 2007 9:40 am
by Brat
How about changing the arms downward to the longer version I think WE has? Is it possible? Is it cost effective and does the performance improved?