RC10Talk - The Net's Largest Vintage R/C Community

oaky... Im still up in the air about using my mint Sees wheels on my 10.... But in the meantime I want to run a set of wheels/tires that will work on carpet tracks... Off the top of your collective heads what wheels are the best and tires for it and wheres the best place? Tower??

Thanks!

ok.. what new rc10 wheels will work on older cars? Will the RC10 B4 wheels work??

here ya go. scroll down to the b3 foams. these might be a little soft for carpet, though.

http://www.speedysracingparts.com/AssociatedBuggyFoams.htm

now, if your rear axles are 1/4", you'll have to change them to 3/16". easiest way would be to pick up a set of b2 mip cvd's for the rear. also, you'll need to change the rear bearings. if your car has the standard buggy carriers, get some 3/8" x 3/16" flanged bearings.

you'll also need 3/8" x 3/16" unflanged bearings for the front wheels.

thanks!!

Try TM Racing Tires. They make direct fit foams for Losi and Associated, and even 2.0 wheels.

Lots of guys will still use these on dirt with the old RC10 chassis...

thank you!