Page 1 of 1
Your portable toolbox
Posted: Tue Dec 01, 2009 9:29 am
by budhatrain
What are 'must have' tools in a trackside toolbox?
Re: Your portable toolbox
Posted: Tue Dec 01, 2009 11:15 am
by SoloGraphix
A T10 torx driver
I converted all me screws to torx in my x-6 squared because of a tip I saw on the XF site from Brian Kinwald. They really do tend to strip out A LOT less if ever.
Re: Your portable toolbox
Posted: Wed Dec 02, 2009 9:58 pm
by littleVETTE
it all depends on the car you have at the track, at the moment. for rc10's ... my .50, 3/32, 5/64, 2.5mm, 1/16 wiha drivers, 1/4, 8/32 nut drivers, new paint brush, tooth brush, needle nose pliers, rpm shock tools, and double sided tape. aside from the other "tool boxes" i bring too.
Re: Your portable toolbox
Posted: Wed Dec 02, 2009 10:34 pm
by Charlie don't surf
All the tools mentioned above, plus at least one of every part on the car--because inevitably they won't have one, no matter where you are, or what car it is
Re: Your portable toolbox
Posted: Wed Dec 02, 2009 11:34 pm
by uzzi
Duct tape?
Re: Your portable toolbox
Posted: Thu Dec 03, 2009 12:26 am
by badhoopty
heres mine. basic stuff.
Re: Your portable toolbox
Posted: Thu Dec 03, 2009 3:06 am
by markt311
I just take everything I have to the track, cause you never know what you're going to blow up.
Re: Your portable toolbox
Posted: Thu Dec 03, 2009 8:12 am
by Brandon G
Wiha nut drivers and screwdrivers. Full set of metric and SAE Dynamite aluminum handled allen wrenches. Armstrong needle nose pliers.
Re: Your portable toolbox
Posted: Thu Dec 03, 2009 6:49 pm
by justinspeed79
markt311 wrote:I just take everything I have to the track, cause you never know what you're going to blow up.
Me too. If I leave one stupid little thing behind, it will almost certainly be the one thing I can't without that day.
